http://bugzilla.kernel.org/show_bug.cgi?id=10943 ------- Comment #2 from gfpadovan@xxxxxxxxx 2008-06-20 17:32 ------- -It's a notebook from a Brazilian vendor (Itautec S.A.). -When ahci is built into kernel the machine shutdown. All okay. -Kernel boot log: [ 22.444268] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 22.444315] USB Universal Host Controller Interface driver v3.0 [ 22.452500] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 22.460704] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 22.460709] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 22.469087] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 22.469124] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 22.485748] uhci_hcd 0000:00:1a.0: irq 17, io base 0x00001820 [ 22.494113] usb usb3: configuration #1 chosen from 1 choice [ 22.502539] hub 3-0:1.0: USB hub found [ 22.510891] hub 3-0:1.0: 2 ports detected [ 22.606758] usb 1-1: configuration #1 chosen from 1 choice [ 22.619329] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 22.627683] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 22.627688] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 22.635988] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 22.644207] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 22.652301] usb usb4: configuration #1 chosen from 1 choice [ 22.660383] hub 4-0:1.0: USB hub found [ 22.668275] hub 4-0:1.0: 2 ports detected [ 22.776917] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 22.784727] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 22.784731] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 22.792399] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 22.800135] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001860 [ 22.808018] usb usb5: configuration #1 chosen from 1 choice [ 22.815821] hub 5-0:1.0: USB hub found [ 22.823516] hub 5-0:1.0: 2 ports detected [ 22.834722] usb 2-3: new high speed USB device using ehci_hcd and address 2 [ 22.931737] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 22.939336] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 22.939341] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 22.947237] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 22.955108] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001880 [ 22.963258] usb usb6: configuration #1 chosen from 1 choice [ 22.971202] hub 6-0:1.0: USB hub found [ 22.978965] hub 6-0:1.0: 2 ports detected [ 22.998697] usb 2-3: configuration #1 chosen from 1 choice [ 23.087560] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 23.095394] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 23.095399] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 23.103379] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 23.111320] uhci_hcd 0000:00:1d.2: irq 19, io base 0x000018a0 [ 23.119362] usb usb7: configuration #1 chosen from 1 choice [ 23.127339] hub 7-0:1.0: USB hub found [ 23.135137] hub 7-0:1.0: 2 ports detected [ 23.243399] Initializing USB Mass Storage driver... [ 23.276333] scsi0 : SCSI emulation for USB Mass Storage devices [ 23.284146] usb-storage: device found at 2 [ 23.284149] usb-storage: waiting for device to settle before scanning [ 23.380142] usbcore: registered new interface driver usb-storage [ 23.387817] USB Mass Storage support registered. [ 23.395718] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 23.407493] i8042.c: Detected active multiplexing controller, rev 1.1. [ 23.417430] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 23.425326] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 23.433102] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 23.440798] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 23.448326] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 23.462347] mice: PS/2 mouse device common for all mice [ 23.500391] input: AT Translated Set 2 keyboard as /class/input/input1 [ 23.586888] usb 7-1: new low speed USB device using uhci_hcd and address 2 [ 23.640663] EISA: Probing bus 0 at eisa.0 [ 23.648127] Cannot allocate resource for EISA slot 1 [ 23.655676] Cannot allocate resource for EISA slot 2 [ 23.663124] Cannot allocate resource for EISA slot 3 [ 23.670392] EISA: Detected 0 cards. [ 23.677508] cpuidle: using governor ladder [ 23.684593] cpuidle: using governor menu [ 23.772669] usb 7-1: configuration #1 chosen from 1 choice [ 23.782500] usbcore: registered new interface driver hiddev [ 23.802551] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /class/input/input2 [ 23.812965] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1d.2-1 [ 23.820378] usbcore: registered new interface driver usbhid [ 23.827788] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 23.835384] TCP cubic registered [ 23.842784] NET: Registered protocol family 1 [ 23.850140] NET: Registered protocol family 17 [ 23.857544] RPC: Registered udp transport module. [ 23.864835] RPC: Registered tcp transport module. [ 23.871983] Starting balanced_irq [ 23.878983] Using IPI No-Shortcut mode [ 23.886170] Freeing unused kernel memory: 304k freed [ 23.925355] scsi 0:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 23.926399] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 24.024696] input: PS/2 Mouse as /class/input/input3 [ 24.047170] input: AlpsPS/2 ALPS GlidePoint as /class/input/input4 [ 24.123317] sl811: driver sl811-hcd, 19 May 2005 [ 24.303397] libata version 3.00 loaded. [ 24.787118] ahci 0000:00:1f.2: version 3.0 [ 24.787155] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 [ 25.786485] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 25.786489] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 25.786496] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 25.786723] scsi1 : ahci [ 25.786810] scsi2 : ahci [ 25.786876] scsi3 : ahci [ 25.786993] ata1: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504100 irq 221 [ 25.786998] ata2: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504180 irq 221 [ 25.787002] ata3: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504200 irq 221 [ 26.241968] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 26.243300] ata1.00: ATA-7: ST94813AS, 3.04, max UDMA/133 [ 26.243304] ata1.00: 78140160 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 26.244948] ata1.00: configured for UDMA/133 [ 26.547626] ata2: SATA link down (SStatus 0 SControl 300) [ 26.850291] ata3: SATA link down (SStatus 0 SControl 300) [ 26.850402] scsi 1:0:0:0: Direct-Access ATA ST94813AS 3.04 PQ: 0 ANSI: 5 [ 26.850537] sd 1:0:0:0: [sdb] 78140160 512-byte hardware sectors (40008 MB) [ 26.850550] sd 1:0:0:0: [sdb] Write Protect is off [ 26.850553] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 26.850572] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.850626] sd 1:0:0:0: [sdb] 78140160 512-byte hardware sectors (40008 MB) [ 26.850637] sd 1:0:0:0: [sdb] Write Protect is off [ 26.850640] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 26.850658] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.850661] sdb: sdb1 sdb2 [ 26.897771] sd 1:0:0:0: [sdb] Attached SCSI disk [ 27.027519] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@xxxxxxxxxx [ 27.113059] md: raid0 personality registered for level 0 [ 27.151983] md: raid1 personality registered for level 1 [ 27.191973] md: raid10 personality registered for level 10 [ 27.244708] JFS: nTxBlock = 8011, nTxLock = 64091 [ 27.293990] SGI XFS with ACLs, no debug enabled [ 27.294304] SGI XFS Quota Management subsystem [ 27.338141] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 [ 27.338145] Copyright (c) 1999-2006 Intel Corporation. [ 27.453376] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 27.453422] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 27.777218] scsi: <fdomain> Detection failed (no card) [ 27.821022] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 27.821103] GDT-HA: Found 0 PCI Storage RAID Controllers [ 28.193672] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 28.236506] 3ware 9000 Storage Controller device driver for Linux v2.26.02.010. [ 28.280495] usb-storage: device scan complete [ 28.280857] sysfs: duplicate filename '0:0:0:0' can not be created [ 28.280861] WARNING: at fs/sysfs/dir.c:424 sysfs_add_one() [ 28.280865] Pid: 5480, comm: scsi_scan_0 Not tainted 2.6.24-gentoo-r8_dsk_smp #1 [ 28.280879] [<c01a8a2f>] sysfs_add_one+0x54/0xb8 [ 28.280892] [<c01a8ef4>] create_dir+0x3c/0x6c [ 28.280898] [<c01a8f51>] sysfs_create_dir+0x2d/0x40 [ 28.280902] [<c026cd4f>] kobject_get+0xf/0x13 [ 28.280907] [<c026d174>] kobject_add+0xe9/0x190 [ 28.280911] [<c026d078>] kobject_set_name+0x81/0x94 [ 28.280917] [<c02cd31d>] device_add+0x8d/0x541 [ 28.280925] [<c02fc0ea>] scsi_sysfs_add_sdev+0x2a/0x142 [ 28.280930] [<c02f342a>] __scsi_iterate_devices+0x44/0x57 [ 28.280937] [<c02fb05b>] do_scan_async+0x6e/0x12c [ 28.280941] [<c011c3e5>] complete+0x36/0x44 [ 28.280947] [<c02fafed>] do_scan_async+0x0/0x12c [ 28.280958] [<c01329c7>] kthread+0x38/0x5d [ 28.280963] [<c013298f>] kthread+0x0/0x5d [ 28.280967] [<c0104b2b>] kernel_thread_helper+0x7/0x10 [ 28.280973] ======================= [ 28.280977] kobject_add failed for 0:0:0:0 with -EEXIST, don't try to register things with the same name in the same directory. [ 28.280981] Pid: 5480, comm: scsi_scan_0 Not tainted 2.6.24-gentoo-r8_dsk_smp #1 [ 28.280985] [<c026d1e9>] kobject_add+0x15e/0x190 [ 28.280989] [<c026d078>] kobject_set_name+0x81/0x94 [ 28.280995] [<c02cd31d>] device_add+0x8d/0x541 [ 28.281001] [<c02fc0ea>] scsi_sysfs_add_sdev+0x2a/0x142 [ 28.281006] [<c02f342a>] __scsi_iterate_devices+0x44/0x57 [ 28.281011] [<c02fb05b>] do_scan_async+0x6e/0x12c [ 28.281016] [<c011c3e5>] complete+0x36/0x44 [ 28.281021] [<c02fafed>] do_scan_async+0x0/0x12c [ 28.281025] [<c01329c7>] kthread+0x38/0x5d [ 28.281029] [<c013298f>] kthread+0x0/0x5d [ 28.281033] [<c0104b2b>] kernel_thread_helper+0x7/0x10 [ 28.281038] ======================= [ 28.281040] error 1 [ 28.282297] Adaptec aacraid driver 1.1-5[2449]-ms [ 28.327709] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 28.327714] Detecting Adaptec I2O RAID controllers... [ 28.493037] QLogic Fibre Channel HBA Driver [ 29.215423] ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007) [ 29.267844] DC390: clustering now enabled by default. If you get problems load [ 29.267847] with "disable_clustering=1" and report to maintainers [ 29.318305] nsp32: loading... [ 29.413062] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 29.478913] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 29.529250] Fusion MPT base driver 3.04.06 [ 29.529254] Copyright (c) 1999-2007 LSI Corporation [ 29.724131] Fusion MPT SAS Host driver 3.04.06 [ 29.822543] Fusion MPT SPI Host driver 3.04.06 [ 30.004687] Fusion MPT FC Host driver 3.04.06 [ 30.055445] Compaq SMART2 Driver (v 2.6.0) [ 30.106295] HP CISS Driver (v 3.6.14) [ 30.261582] megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007 [ 30.348151] Emulex LightPulse Fibre Channel SCSI driver 8.2.2 [ 30.348155] Copyright(c) 2004-2007 Emulex. All rights reserved. [ 31.620851] EXT3-fs: INFO: recovery required on readonly filesystem. [ 31.620856] EXT3-fs: write access will be enabled during recovery. [ 37.864838] kjournald starting. Commit interval 5 seconds [ 37.864851] EXT3-fs: recovery complete. [ 37.865317] EXT3-fs: mounted filesystem with ordered data mode. [ 41.625786] agpgart: Detected an Intel 965GM Chipset. [ 41.626600] agpgart: Detected 7676K stolen memory. [ 41.706315] agpgart: AGP aperture is 256M @ 0xd0000000 [ 42.286417] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 42.286452] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 42.321514] patch_cxthsfmodem: symbol_request(cnxthwhda_probe) failed [ 42.409958] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 42.409977] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 42.410025] sky2 0000:04:00.0: v1.20 addr 0xf4200000 irq 16 Yukon-EC Ultra (0xb4) rev 3 [ 42.410575] sky2 eth0: addr 00:14:0b:44:87:b4 [ 42.607091] iTCO_vendor_support: vendor-support=0 [ 42.618583] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 42.618698] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 42.618743] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) [ 42.820988] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 18 [ 42.826536] input: PC Speaker as /class/input/input5 [ 42.855934] Real Time Clock Driver v1.12ac [ 45.535658] EXT3 FS on sdb1, internal journal [ 45.759014] ACPI: AC Adapter [ACAD] (on-line) [ 45.772599] ACPI: SSDT 3F6D5021, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 45.772880] ACPI: SSDT 3F6D49B2, 05EA (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 45.775013] Monitor-Mwait will be used to enter C-1 state [ 45.775017] Monitor-Mwait will be used to enter C-2 state [ 45.775067] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 45.775074] ACPI: Processor [CPU0] (supports 8 throttling states) [ 45.775375] ACPI: SSDT 3F6D5217, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 45.775637] ACPI: SSDT 3F6D4F9C, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 45.776884] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 45.776893] ACPI: Processor [CPU1] (supports 8 throttling states) [ 45.777006] Marking TSC unstable due to: TSC halts in idle. [ 45.777423] Time: hpet clocksource has been installed. [ 45.863675] ACPI: Battery Slot [BAT0] (battery present) [ 45.878954] input: Power Button (FF) as /class/input/input6 [ 45.890577] ACPI: Power Button (FF) [PWRF] [ 45.890671] input: Lid Switch as /class/input/input7 [ 45.894675] ACPI: Lid Switch [LID] [ 45.894766] input: Power Button (CM) as /class/input/input8 [ 45.906544] ACPI: Power Button (CM) [PWRB] [ 45.906617] input: Sleep Button (CM) as /class/input/input9 [ 45.921533] ACPI: Sleep Button (CM) [SLPB] [ 46.137536] No dock devices found. [ 46.164219] ACPI: Transitioning device [FAN0] to D3 [ 46.164226] ACPI: Transitioning device [FAN0] to D3 [ 46.164234] ACPI: Fan [FAN0] (off) [ 46.164399] ACPI: Transitioning device [FAN1] to D3 [ 46.164403] ACPI: Transitioning device [FAN1] to D3 [ 46.164409] ACPI: Fan [FAN1] (off) [ 46.273678] ACPI: Thermal Zone [TZ00] (57 C) [ 46.274653] ACPI: Thermal Zone [TZ01] (27 C) [ 46.306172] input: Video Bus as /class/input/input10 [ 46.318016] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 46.764228] Adding 996020k swap on /dev/sdb2. Priority:-1 extents:1 across:996020k [ 62.822590] hda: UDMA/33 mode selected [ 64.226282] hsfengine: module license 'see LICENSE file distributed with driver' taints kernel. [ 64.477731] sky2 eth0: enabling interface [ 65.530854] usbcore: registered new interface driver hsfusbcd2 [ 66.253446] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 66.766591] NET: Registered protocol family 10 [ 66.766912] lo: Disabled Privacy Extensions [ 77.619790] eth0: no IPv6 routers present -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
