Re: Adding port multiplier support to a LLDD

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mark Miesfeld wrote:
> Hi,
> 
> I wonder if someone could give me a broad outline of what is needed to
> add port multiplier support to a low-level SATA device driver through
> libata in a 2.6.26 kernel.
> 
> I'm working on a driver for a new SOC (460EX) that AMCC has.  The chip
> has support for SATA and support for port multipliers through
> command-based switching.
> 
> For our in-house validation boards I have the driver working on a
> 2.6.19 kernel and implemented the port multiplier support within the
> driver itself since libata didn't yet have port multiplier support.
> 
> Our customer evaluation boards (Canyonlands) are using a 2.6.26
> kernel.  Stefan Roese at DENX has ported the 2.6.19 driver to 2.6.26
> but without port multiplier support.  In 2.6.26 the libata port
> multiplier support looks pretty good, I was hoping I can add the
> support to the 2.6.26 driver fairly easily by going through libata.
> 
> What basic steps should I take?

The following thread should help.

http://thread.gmane.org/gmane.linux.ide/24799

-- 
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux