Re: problem with sata_nv and SATA<>PATA bridge (2.6.18/2.6.24)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Cc'ing Peer Chen and quoting whole body for reference.

Can you please post the result of "lspci -nn" and which bridge are you
using?

Mark Paulus wrote:
> I have a motherboard with Nvidia sata and
> SIL3512 sata controllers.  I also have a brand spanking new 320GB IDE
> drive that I am
> connecting to the mobo via a SATA<>PATA
> bridge.  This combo is giving me fits with
> the NV controller, but seems to work fine
> with the SIL sata controller.
> 
> I had this problem on 2.6.22 on the Sil side,
> but Tejun found the issue and created a patch.
> 
> The action I was trying to accomplish was:
> mkfs.jfs -c /dev/sdb1.
> 
> Here are the messages from my messages
> file:
> May 27 16:42:45 storage1 kernel: ata1: SATA max UDMA/133 cmd 0x9F0 ctl
> 0xBF2 bmdma 0xDC00 irq 177
> May 27 16:42:45 storage1 kernel: ata2: SATA max UDMA/133 cmd 0x970 ctl
> 0xB72 bmdma 0xDC08 irq 177
> May 27 16:42:45 storage1 kernel: scsi0 : sata_nv
> May 27 16:42:45 storage1 kernel: ata1: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:42:45 storage1 kernel: ata1.00: ATA-7, max UDMA/133, 321672960
> sectors: LBA48 NCQ (depth 0/32)
> May 27 16:42:45 storage1 kernel: ata1.00: ata1: dev 0 multi count 16
> May 27 16:42:45 storage1 kernel: ata1.00: configured for UDMA/133
> May 27 16:42:45 storage1 kernel: scsi1 : sata_nv
> May 27 16:42:45 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:42:45 storage1 kernel: ata2.00: ATA-8, max UDMA/100, 625142448
> sectors: LBA48
> May 27 16:42:45 storage1 kernel: ata2.00: ata2: dev 0 multi count 16
> May 27 16:42:45 storage1 kernel: ata2.00: configured for UDMA/100
> May 27 16:42:45 storage1 kernel:   Vendor: ATA       Model:
> HDT722516DLA380   Rev: V43O
> May 27 16:42:45 storage1 kernel:   Type:  
> Direct-Access                      ANSI SCSI revision: 05
> May 27 16:42:45 storage1 kernel:   Vendor: ATA       Model: WDC
> WD3200AAJB-0  Rev: 00.0
> May 27 16:42:45 storage1 kernel:   Type:  
> Direct-Access                      ANSI SCSI revision: 05
> May 27 16:42:45 storage1 kernel: ACPI: PCI Interrupt Link [APC4] enabled
> at IRQ 19
> May 27 16:42:45 storage1 kernel: GSI 19 sharing vector 0xC9 and IRQ 19
> May 27 16:42:45 storage1 kernel: ACPI: PCI Interrupt 0000:02:0b.0[A] ->
> Link [APC4] -> GSI 19 (level, low) -> IRQ 201
> May 27 16:42:45 storage1 kernel: skge 1.6 addr 0xf5000000 irq 201 chip
> Yukon-Lite rev 9
> May 27 16:42:45 storage1 kernel: skge eth0: addr 00:0f:ea:85:73:1c
> May 27 16:42:45 storage1 kernel: ACPI: PCI Interrupt Link [APC2] enabled
> at IRQ 17
> May 27 16:42:45 storage1 kernel: GSI 20 sharing vector 0xD1 and IRQ 20
> May 27 16:42:45 storage1 kernel: ACPI: PCI Interrupt 0000:02:0d.0[A] ->
> Link [APC2] -> GSI 17 (level, low) -> IRQ 209
> May 27 16:42:45 storage1 kernel: ata3: SATA max UDMA/100 cmd
> 0xFFFFC2000001A080 ctl 0xFFFFC2000001A08A bmdma 0xFFFFC2000001A000 irq 209
> May 27 16:42:45 storage1 kernel: ata4: SATA max UDMA/100 cmd
> 0xFFFFC2000001A0C0 ctl 0xFFFFC2000001A0CA bmdma 0xFFFFC2000001A008 irq 209
> May 27 16:42:45 storage1 kernel: scsi2 : sata_sil
> May 27 16:42:45 storage1 kernel: Uniform Multi-Platform E-IDE driver
> Revision: 7.00alpha2
> May 27 16:42:45 storage1 kernel: ide: Assuming 33MHz system bus speed
> for PIO modes; override with idebus=xx
> May 27 16:42:45 storage1 kernel: ata3: SATA link down (SStatus 0
> SControl 310) May 27 16:42:45 storage1 kernel: scsi3 : sata_sil
> May 27 16:42:45 storage1 kernel: ata4: SATA link down (SStatus 0
> SControl 310)
> May 27 16:42:45 storage1 kernel: NFORCE3-250: IDE controller at PCI slot
> 0000:00:08.0
> May 27 16:42:45 storage1 kernel: NFORCE3-250: chipset revision 162
> May 27 16:42:45 storage1 kernel: NFORCE3-250: not 100%% native mode:
> will probe irqs later
> May 27 16:42:45 storage1 kernel: NFORCE3-250: 0000:00:08.0 (rev a2)
> UDMA133 controller
> May 27 16:42:45 storage1 kernel:     ide0: BM-DMA at 0xf000-0xf007, BIOS
> settings: hda:DMA, hdb:DMA
> May 27 16:42:45 storage1 kernel:     ide1: BM-DMA at 0xf008-0xf00f, BIOS
> settings: hdc:DMA, hdd:DMA
> May 27 16:42:45 storage1 kernel: SCSI device sda: 321672960 512-byte
> hdwr sectors (164697 MB)
> May 27 16:42:45 storage1 kernel: sda: Write Protect is off
> May 27 16:42:45 storage1 kernel: SCSI device sda: drive cache: write back
> May 27 16:42:45 storage1 kernel: SCSI device sda: 321672960 512-byte
> hdwr sectors (164697 MB)
> May 27 16:42:45 storage1 kernel: sda: Write Protect is off
> May 27 16:42:45 storage1 kernel: SCSI device sda: drive cache: write back
> May 27 16:42:45 storage1 kernel:  sda: sda1 sda2 < sda5 > sda3
> May 27 16:42:45 storage1 kernel: sd 0:0:0:0: Attached scsi disk sda
> May 27 16:42:45 storage1 kernel: SCSI device sdb: 625142448 512-byte
> hdwr sectors (320073 MB)
> May 27 16:42:45 storage1 kernel: sdb: Write Protect is off
> May 27 16:42:45 storage1 kernel: SCSI device sdb: drive cache: write back
> May 27 16:42:45 storage1 kernel: SCSI device sdb: 625142448 512-byte
> hdwr sectors (320073 MB)
> May 27 16:42:45 storage1 kernel: sdb: Write Protect is off
> May 27 16:42:45 storage1 kernel: SCSI device sdb: drive cache: write back
> May 27 16:42:45 storage1 kernel:  sdb: unknown partition table
> May 27 16:42:45 storage1 kernel: sd 1:0:0:0: Attached scsi disk sdb
> 
> May 27 16:42:51 storage1 kernel: NFSD: starting 90-second grace period
> May 27 16:47:50 storage1 kernel: ata2: EH complete
> May 27 16:47:50 storage1 kernel: SCSI device sdb: 625142448 512-byte
> hdwr sectors (320073 MB)
> May 27 16:47:50 storage1 kernel: sdb: Write Protect is off
> May 27 16:47:50 storage1 kernel: SCSI device sdb: drive cache: write back
> May 27 16:47:53 storage1 kernel: SCSI device sdb: 625142448 512-byte
> hdwr sectors (320073 MB)
> May 27 16:47:53 storage1 kernel: sdb: Write Protect is off
> May 27 16:47:53 storage1 kernel: SCSI device sdb: drive cache: write back
> May 27 16:47:53 storage1 kernel:  sdb: sdb1
> May 27 16:49:43 storage1 kernel: ata2: port is slow to respond, please
> be patient
> May 27 16:50:06 storage1 kernel: ata2: soft resetting port
> May 27 16:50:06 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:50:06 storage1 kernel: ata2.00: configured for UDMA/100
> May 27 16:50:06 storage1 kernel: ata2: EH complete
> May 27 16:50:43 storage1 kernel: ata2: port is slow to respond, please
> be patient
> May 27 16:51:06 storage1 kernel: ata2: soft resetting port
> May 27 16:51:06 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:51:06 storage1 kernel: ata2.00: configured for UDMA/100
> May 27 16:51:06 storage1 kernel: ata2: EH complete
> May 27 16:51:44 storage1 kernel: ata2: port is slow to respond, please
> be patient
> May 27 16:52:07 storage1 kernel: ata2: soft resetting port
> May 27 16:52:07 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:52:07 storage1 kernel: ata2.00: configured for UDMA/100
> May 27 16:52:07 storage1 kernel: ata2: EH complete
> May 27 16:52:37 storage1 kernel: ata2.00: limiting speed to UDMA/66
> May 27 16:52:44 storage1 kernel: ata2: port is slow to respond, please
> be patient
> May 27 16:53:07 storage1 kernel: ata2: soft resetting port
> May 27 16:53:07 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:53:07 storage1 kernel: ata2.00: configured for UDMA/66
> May 27 16:53:07 storage1 kernel: ata2: EH complete
> May 27 16:53:37 storage1 kernel: ata2.00: limiting speed to UDMA/44
> May 27 16:53:45 storage1 kernel: ata2: port is slow to respond, please
> be patient
> May 27 16:54:08 storage1 kernel: ata2: soft resetting port
> May 27 16:54:08 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:54:08 storage1 kernel: ata2.00: configured for UDMA/44
> May 27 16:54:08 storage1 kernel: ata2: EH complete
> May 27 16:54:38 storage1 kernel: ata2.00: limiting speed to UDMA/33
> May 27 16:54:45 storage1 kernel: ata2: port is slow to respond, please
> be patient
> May 27 16:55:08 storage1 kernel: ata2: soft resetting port
> May 27 16:55:08 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:55:08 storage1 kernel: ata2.00: configured for UDMA/33
> May 27 16:55:08 storage1 kernel: ata2: EH complete
> May 27 16:55:38 storage1 kernel: ata2.00: limiting speed to UDMA/25
> May 27 16:55:46 storage1 kernel: ata2: port is slow to respond, please
> be patient
> May 27 16:56:02 storage1 shutdown[3403]: shutting down for system reboot
> May 27 16:56:09 storage1 kernel: ata2: soft resetting port
> May 27 16:56:09 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:56:09 storage1 kernel: ata2.00: configured for UDMA/25
> May 27 16:56:09 storage1 kernel: ata2: EH complete
> May 27 16:56:09 storage1 kernel: sd 1:0:0:0: SCSI error: return code =
> 0x08000002
> May 27 16:56:09 storage1 kernel: sdb: Current: sense key: Aborted Command
> May 27 16:56:09 storage1 kernel:     Additional sense: No additional
> sense information
> May 27 16:56:09 storage1 kernel: end_request: I/O error, dev sdb, sector
> 76607
> May 27 16:56:09 storage1 kernel: lost page write due to I/O error on sdb1
> May 27 16:56:09 storage1 last message repeated 9 times
> May 27 16:56:09 storage1 kernel: ata2: EH complete
> May 27 16:56:09 storage1 kernel: SCSI device sdb: 625142448 512-byte
> hdwr sectors (320073 MB)
> May 27 16:56:39 storage1 kernel: ata2.00: limiting speed to UDMA/16
> May 27 16:56:46 storage1 kernel: ata2: port is slow to respond, please
> be patient
> May 27 16:57:09 storage1 kernel: ata2: soft resetting port
> May 27 16:57:09 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:57:09 storage1 kernel: ata2.00: configured for UDMA/16
> May 27 16:57:09 storage1 kernel: ata2: EH complete
> May 27 16:57:39 storage1 kernel: ata2.00: limiting speed to PIO4
> May 27 16:57:47 storage1 kernel: ata2: port is slow to respond, please
> be patient
> May 27 16:58:10 storage1 kernel: ata2: soft resetting port
> May 27 16:58:10 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:58:10 storage1 kernel: ata2.00: configured for PIO4
> May 27 16:58:10 storage1 kernel: ata2: EH complete
> May 27 16:58:10 storage1 kernel: ata2.00: limiting speed to PIO3
> May 27 16:58:10 storage1 kernel: ata2: soft resetting port
> May 27 16:58:10 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:58:10 storage1 kernel: ata2.00: configured for PIO3
> May 27 16:58:10 storage1 kernel: ata2: EH complete
> May 27 16:58:10 storage1 kernel: ata2.00: limiting speed to PIO2
> May 27 16:58:11 storage1 kernel: ata2: soft resetting port
> May 27 16:58:11 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:58:11 storage1 kernel: ata2.00: configured for PIO2
> May 27 16:58:11 storage1 kernel: ata2: EH complete
> May 27 16:58:11 storage1 kernel: ata2.00: limiting speed to PIO1
> May 27 16:58:11 storage1 kernel: ata2: soft resetting port
> May 27 16:58:11 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:58:11 storage1 kernel: ata2.00: configured for PIO1
> May 27 16:58:11 storage1 kernel: ata2: EH complete
> May 27 16:58:11 storage1 kernel: ata2.00: limiting speed to PIO0
> May 27 16:58:11 storage1 kernel: ata2: soft resetting port
> May 27 16:58:12 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:58:12 storage1 kernel: ata2.00: configured for PIO0
> May 27 16:58:12 storage1 kernel: sd 1:0:0:0: SCSI error: return code =
> 0x08000002
> May 27 16:58:12 storage1 kernel: sdb: Current: sense key: Aborted Command
> May 27 16:58:12 storage1 kernel:     Additional sense: No additional
> sense information
> May 27 16:58:12 storage1 kernel: end_request: I/O error, dev sdb, sector
> 625071815
> May 27 16:58:12 storage1 kernel: printk: 38 messages suppressed.
> May 27 16:58:12 storage1 kernel: lost page write due to I/O error on sdb1
> May 27 16:58:12 storage1 last message repeated 9 times
> May 27 16:58:12 storage1 kernel: ata2: EH complete
> May 27 16:58:12 storage1 kernel: sdb: Write Protect is off
> May 27 16:58:12 storage1 kernel: ata2: soft resetting port
> May 27 16:58:12 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:58:12 storage1 kernel: ata2.00: configured for PIO0
> May 27 16:58:12 storage1 kernel: ata2: EH complete
> May 27 16:58:12 storage1 kernel: ata2: soft resetting port
> May 27 16:58:13 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:58:13 storage1 kernel: ata2.00: configured for PIO0
> May 27 16:58:13 storage1 kernel: ata2: EH complete
> May 27 16:58:13 storage1 kernel: ata2: soft resetting port
> May 27 16:58:13 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:58:13 storage1 kernel: ata2.00: configured for PIO0
> May 27 16:58:13 storage1 kernel: ata2: EH complete
> May 27 16:58:13 storage1 kernel: ata2: soft resetting port
> May 27 16:58:14 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 27 16:58:14 storage1 kernel: ata2.00: configured for PIO0
> May 27 16:58:14 storage1 kernel: ata2: EH complete
> May 27 16:58:14 storage1 kernel: ata2: soft resetting port
> May 27 16:58:14 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> 
> and so on
> and
> so
> on
> ad nauseum

-- 
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux