Re: ahci.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



dunneil wrote:
> hi,
>  
>   My hardware is AHCI SATA controller with FPGA-based PCIE board.My 
> kernel is 2.6.20.7. after insmod ahci.ko, i run lspci -xxxxvvvv 
> command.but,it seems that it doesn't set the BUS master enable bit of 
> PCIE header command register.plz check my header content.
>  
>   But,i run Pcitree software at windows.The BUS master enable is 
> observed to be set,and that i can read out a part of sata register value.
>  
>   how to debug this issue?

ahci.c calls pci_set_master() to enable the BusMaster bit.

	Jeff





--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux