Hi, Here is the log again. pcmcia: registering new device pcmcia0.0 pata_pcmcia 0.0: XXX ENTER Pid: 1648, comm: modprobe Not tainted 2.6.26-rc5 #3 [<d885314f>] pcmcia_init_one+0x34/0x585 [pata_pcmcia] [<c0559444>] pccard_get_tuple_data+0x53/0x5c [<c0476a1a>] iput+0x2a/0x4a [<c055b156>] pcmcia_device_probe+0xa6/0xf6 [<c0538d00>] driver_probe_device+0x103/0x12c [<c0538d29>] __driver_attach+0x0/0x55 [<c0538cb2>] driver_probe_device+0xb5/0x12c [<c0538d60>] __driver_attach+0x37/0x55 [<c05385fb>] bus_for_each_dev+0x37/0x59 [<c0538b4d>] driver_attach+0x11/0x13 [<c0538d29>] __driver_attach+0x0/0x55 [<c053894f>] bus_add_driver+0x8a/0x1a7 [<c04d2db0>] kset_find_obj+0x20/0x4b [<c0538f41>] driver_register+0x6d/0xc1 [<c055b8d0>] pcmcia_register_driver+0xaf/0xdb [<c043b932>] sys_init_module+0x1844/0x19b4 [<c055c3db>] pcmcia_request_irq+0x0/0x1d6 [<c0403815>] sysenter_past_esp+0x6a/0x91 ======================= scsi2 : pata_pcmcia ata3: PATA max PIO0 cmd 0xd100 ctl 0xd10e irq 3 ata3.00: CFA: , Ver.1.0, max PIO2 ata3.00: 32000 sectors, multi 0: LBA ata3.00: configured for PIO0 ata3.00: configured for PIO0 ata3: EH complete isa bounce pool size: 16 pages scsi 2:0:0:0: Direct-Access ATA Ver. PQ: 0 ANSI: 5 sd 2:0:0:0: [sdb] 32000 512-byte hardware sectors (16 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] 32000 512-byte hardware sectors (16 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 2:0:0:0: [sdb] Attached SCSI removable disk sd 2:0:0:0: Attached scsi generic sg2 type 0 pata_pcmcia 0.0: XXX LEAVE 0 pcmcia: registering new device pcmcia0.1 pata_pcmcia 0.1: XXX ENTER Pid: 6, comm: events/0 Not tainted 2.6.26-rc5 #3 [<d885314f>] pcmcia_init_one+0x34/0x585 [pata_pcmcia] [<c0559444>] pccard_get_tuple_data+0x53/0x5c [<c055b156>] pcmcia_device_probe+0xa6/0xf6 [<c0538cb2>] driver_probe_device+0xb5/0x12c [<c0538d7e>] __device_attach+0x0/0x5 [<c05383e9>] bus_for_each_drv+0x36/0x5e [<c0538dec>] device_attach+0x4e/0x5e [<c0538d7e>] __device_attach+0x0/0x5 [<c053827c>] bus_attach_device+0x1e/0x46 [<c05376fa>] device_add+0x310/0x43d [<c055b5ab>] pcmcia_device_add+0x188/0x1eb [<c055b60e>] pcmcia_delayed_add_device+0x0/0x23 [<c055b628>] pcmcia_delayed_add_device+0x1a/0x23 [<c042b735>] run_workqueue+0x6b/0xe0 [<c042bddf>] worker_thread+0x0/0xbd [<c042be92>] worker_thread+0xb3/0xbd [<c042e000>] autoremove_wake_function+0x0/0x2d [<c042df3e>] kthread+0x38/0x5e [<c042df06>] kthread+0x0/0x5e [<c0404407>] kernel_thread_helper+0x7/0x10 ======================= 0.1: GetNextTuple: No more items pata_pcmcia 0.1: XXX LEAVE -12 pata_pcmcia: probe of 0.1 failed with error -12 modprobe used greatest stack depth: 1676 bytes left pata_pcmcia 0.1: XXX ENTER Pid: 1661, comm: sh Not tainted 2.6.26-rc5 #3 [<d885314f>] pcmcia_init_one+0x34/0x585 [pata_pcmcia] [<c0559444>] pccard_get_tuple_data+0x53/0x5c [<c0476a1a>] iput+0x2a/0x4a [<c055b156>] pcmcia_device_probe+0xa6/0xf6 [<c0538000>] bus_register_notifier+0x2/0xb [<c0538063>] bus_rescan_devices_helper+0x0/0x44 [<c0538cb2>] driver_probe_device+0xb5/0x12c [<c0538d7e>] __device_attach+0x0/0x5 [<c05383e9>] bus_for_each_drv+0x36/0x5e [<c0538dec>] device_attach+0x4e/0x5e [<c0538d7e>] __device_attach+0x0/0x5 [<c053808a>] bus_rescan_devices_helper+0x27/0x44 [<c05385fb>] bus_for_each_dev+0x37/0x59 [<c053862b>] bus_rescan_devices+0xe/0x10 [<c0538063>] bus_rescan_devices_helper+0x0/0x44 [<c055a8f2>] pcmcia_store_allow_func_id_match+0x46/0x5b [<c055a8ac>] pcmcia_store_allow_func_id_match+0x0/0x5b [<c05369d6>] dev_attr_store+0x19/0x1d [<c04997a0>] sysfs_write_file+0xa4/0xd8 [<c04996fc>] sysfs_write_file+0x0/0xd8 [<c0467a3d>] vfs_write+0x83/0x114 [<c0467ff6>] sys_write+0x3c/0x63 [<c0403815>] sysenter_past_esp+0x6a/0x91 ======================= 0.1: GetNextTuple: No more items pata_pcmcia 0.1: XXX LEAVE -12 pata_pcmcia: probe of 0.1 failed with error -12 Best Regards Komuro > > > > Here is the log (your patch is applied). > > Unfortunately, no message that you added appears. > > > > It seems this device is detected as pcmcia0.0 first > > but later it is detected as pcmcia0.1. > > Hmmm... strange. Can you please try the attached patch? > > -- > tejun > -- Komuro <komurojun-mbn@xxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html