Luke Ross wrote:
Hi,
On Tue, Jun 17, 2008 at 09:27:47PM +0900, Tejun Heo wrote:
Alan Cox wrote:
Originally the drive was bought for a different PC with a Silicon Image
3114 controller. The drive worked fine with this (sata_sil). Then I
Ok that proves the point quite nicely. If there is a problem it is not
the one suggested.
Yeah, indeed. It's still weird tho. The difference between
ATAPI_PROT_PIO and ATAPI_PROT_DMA is very small especially on ahci. The
data are still transferred using the same FIS. Only the completion
mechanism is different. It would be great to try the drive on another
ahci controller preferably intel one. Luke, do you have access to any
machine which has intel ahci?
I tried it out on a machine with an Intel ICH7 controller using the AHCI
driver (using a Fedora 9 LiveCD). On the ICH7 the drive wrote a CD
without issue, so possibly it's the drive/controller pair that causes
the problem. I was careful to ensure I was using the ahci driver and not
the ata_piix driver.
I really think it's more generalized ATAPI brokenness, perhaps specific
to AHCI.
I'm going to allocate some time to dig into this, if Tejun doesn't find
the problem, because it's not just limited to a few models. We've been
getting _tons_ of timeout bug reports, and in fact, my own AHCI-based
workstation cannot rip audio CDs at all:
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
...
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: PLEXTOR DVDR PX-755A, 1.03, max UDMA/66
ata4.00: configured for UDMA/66
...
scsi 3:0:0:0: CD-ROM PLEXTOR DVDR PX-755A 1.03 PQ: 0 ANSI: 5
...
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata4.00: cmd a0/01:00:00:30:09/00:00:00:00:00/a0 tag 0 dma 2352 in
cdb be 00 00 00 0d 6d 00 00 01 f8 00 00 00 00 00 00
res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata4.00: status: { DRDY }
ata4: soft resetting link
ata4: port is slow to respond, please be patient (Status 0xd0)
ata4: softreset failed (device not ready)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/66
ata4: EH complete
scsi: unknown opcode 0xd4
scsi: unknown opcode 0xd5
scsi: unknown opcode 0xd8
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
