Mark, Tejun suggested I query you about your thoughts re: the Marvell 88SX7042 or the 88SE6145 SATA controllers when connected with FIS based port multipliers? Based on Intel's announcements last year for the ICH10R where they claimed they were going to implement FIS support for port multipliers, I had planned on rebuilding a Linux based NAS system using a P45 board and ICH10R, but it seems they didn't end up implementing FIS support in the ICH10 series after all (nice of them to neglect to mention that to the community after announcing that feature in the roadmap). So now I'm looking for a different solution. I currently use SI3132 based SATA controllers, but they seem to have some performance issues, and folks seem to be reporting good performance with at least the 88SX7042 part under windows, hence the question. Thanks in advance, Milo -----Original Message----- From: Tejun Heo [mailto:tj@xxxxxxxxxx] Sent: Sunday, June 22, 2008 4:51 PM To: Milo Medin Subject: Re: ICH10R PMP support Milo Medin wrote: > Tejun, what's your opinion of the Marvell 88SX7042 and 88SE6145 > controllers for feeding PMP's? Do they work OK with FIS based PMP's > in your experience? Are they faster than the SI 3132's? Dunno much about that chip. You should ask Mark Lord <mlord@xxxxxxxxx>. Also please cc linux-ide@xxxxxxxxxxxxxxxx -- tejun -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
