Lets remove dead Virtual DMA support for now so it doesn't clutter
core IDE code (it can be bring back when there is a need for it):
* Remove IDE_HFLAG_VDMA host flag.
* Remove ide_drive_t.vdma flag.
* cs5520.c: remove stale FIXMEs, cs5520_dma_host_set() and cs5520_dma_ops
(also there is no longer a need to set IDE_HFLAG_NO_ATAPI_DMA).
There should be no functional changes caused by this patch.
Cc: TAKADA Yoshihito <takada@xxxxxxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
this is against IDE tree + 4 ide-pmac patches + 20 IDE patches from yesterday
drivers/ide/ide-disk.c | 2 +-
drivers/ide/ide-dma.c | 5 ++---
drivers/ide/ide-iops.c | 3 +--
drivers/ide/pci/cs5520.c | 30 ------------------------------
include/linux/ide.h | 3 ---
5 files changed, 4 insertions(+), 39 deletions(-)
Index: b/drivers/ide/ide-disk.c
===================================================================
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -158,7 +158,7 @@ static void ide_tf_set_cmd(ide_drive_t *
write = (task->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0;
if (dma)
- index = drive->vdma ? 4 : 8;
+ index = 8;
else
index = drive->mult_count ? 0 : 4;
Index: b/drivers/ide/ide-dma.c
===================================================================
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -756,9 +756,8 @@ static int ide_tune_dma(ide_drive_t *dri
static int ide_dma_check(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- int vdma = (hwif->host_flags & IDE_HFLAG_VDMA)? 1 : 0;
- if (!vdma && ide_tune_dma(drive))
+ if (ide_tune_dma(drive))
return 0;
/* TODO: always do PIO fallback */
@@ -767,7 +766,7 @@ static int ide_dma_check(ide_drive_t *dr
ide_set_max_pio(drive);
- return vdma ? 0 : -1;
+ return -1;
}
int ide_id_dma_bug(ide_drive_t *drive)
Index: b/drivers/ide/ide-iops.c
===================================================================
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -866,8 +866,7 @@ int ide_config_drive_speed(ide_drive_t *
skip:
#ifdef CONFIG_BLK_DEV_IDEDMA
- if ((speed >= XFER_SW_DMA_0 || (hwif->host_flags & IDE_HFLAG_VDMA)) &&
- drive->using_dma)
+ if (speed >= XFER_SW_DMA_0 && drive->using_dma)
hwif->dma_ops->dma_host_set(drive, 1);
else if (hwif->dma_ops) /* check if host supports DMA */
ide_dma_off_quietly(drive);
Index: b/drivers/ide/pci/cs5520.c
===================================================================
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -62,8 +62,6 @@ static void cs5520_set_pio_mode(ide_driv
struct pci_dev *pdev = to_pci_dev(hwif->dev);
int controller = drive->dn > 1 ? 1 : 0;
- /* FIXME: if DMA = 1 do we need to set the DMA bit here ? */
-
/* 8bit CAT/CRT - 8bit command timing for channel */
pci_write_config_byte(pdev, 0x62 + controller,
(cs5520_pio_clocks[pio].recovery << 4) |
@@ -89,45 +87,17 @@ static void cs5520_set_dma_mode(ide_driv
cs5520_set_pio_mode(drive, 0);
}
-/*
- * We wrap the DMA activate to set the vdma flag. This is needed
- * so that the IDE DMA layer issues PIO not DMA commands over the
- * DMA channel
- *
- * ATAPI is harder so disable it for now using IDE_HFLAG_NO_ATAPI_DMA
- */
-
-static void cs5520_dma_host_set(ide_drive_t *drive, int on)
-{
- drive->vdma = on;
- ide_dma_host_set(drive, on);
-}
-
static const struct ide_port_ops cs5520_port_ops = {
.set_pio_mode = cs5520_set_pio_mode,
.set_dma_mode = cs5520_set_dma_mode,
};
-static const struct ide_dma_ops cs5520_dma_ops = {
- .dma_host_set = cs5520_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = ide_dma_start,
- .dma_end = __ide_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timeout = ide_dma_timeout,
-};
-
-/* FIXME: VDMA is disabled because it caused system hangs */
#define DECLARE_CS_DEV(name_str) \
{ \
.name = name_str, \
.port_ops = &cs5520_port_ops, \
- .dma_ops = &cs5520_dma_ops, \
.host_flags = IDE_HFLAG_ISA_PORTS | \
IDE_HFLAG_CS5520 | \
- IDE_HFLAG_NO_ATAPI_DMA | \
IDE_HFLAG_ABUSE_SET_DMA_MODE, \
.pio_mask = ATA_PIO4, \
}
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -334,7 +334,6 @@ typedef struct ide_drive_s {
unsigned nodma : 1; /* disallow DMA */
unsigned remap_0_to_1 : 1; /* 0=noremap, 1=remap 0->1 (for EZDrive) */
unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */
- unsigned vdma : 1; /* 1=doing PIO over DMA 0=doing normal DMA */
unsigned scsi : 1; /* 0=default, 1=ide-scsi emulation */
unsigned sleeping : 1; /* 1=sleeping & sleep field valid */
unsigned post_reset : 1;
@@ -1083,8 +1082,6 @@ enum {
IDE_HFLAG_NO_IO_32BIT = (1 << 30),
/* never unmask IRQs */
IDE_HFLAG_NO_UNMASK_IRQS = (1 << 31),
- /* host uses VDMA (disabled for now) */
- IDE_HFLAG_VDMA = 0,
};
#ifdef CONFIG_BLK_DEV_OFFBOARD
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
