Move ide_find_port() call to pmac_ide_setup_device().
While at it:
- fix return value (s/-ENODEV/-ENOENT/)
- add DRV_NAME define and use it to set name field of pmac_port_info
- use ide_find_port_slot() instead of ide_find_port()
- remove superfluous error message (ide_find_port_slot() takes care of it)
- drop IDE interface number from driver banner message (but include bus type)
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ide/ppc/pmac.c | 42 ++++++++++++++++--------------------------
1 file changed, 16 insertions(+), 26 deletions(-)
Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -48,6 +48,8 @@
#include <asm/mediabay.h>
#endif
+#define DRV_NAME "ide-pmac"
+
#undef IDE_PMAC_DEBUG
#define DMA_WAIT_TIMEOUT 50
@@ -982,6 +984,7 @@ static const struct ide_port_ops pmac_id
static const struct ide_dma_ops pmac_dma_ops;
static const struct ide_port_info pmac_port_info = {
+ .name = DRV_NAME,
.init_dma = pmac_ide_init_dma,
.chipset = ide_pmac,
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
@@ -1000,11 +1003,11 @@ static const struct ide_port_info pmac_p
* Setup, register & probe an IDE channel driven by this driver, this is
* called by one of the 2 probe functions (macio or PCI).
*/
-static int __devinit
-pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
+static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
{
struct device_node *np = pmif->node;
const int *bidp;
+ ide_hwif_t *hwif;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
struct ide_port_info d = pmac_port_info;
@@ -1073,16 +1076,21 @@ pmac_ide_setup_device(pmac_ide_hwif_t *p
msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY));
}
+ printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), "
+ "bus ID %d%s, irq %d\n", model_name[pmif->kind],
+ pmif->mdev ? "MacIO" : "PCI", pmif->aapl_bus_id,
+ pmif->mediabay ? " (mediabay)" : "", hw.irq);
+
+ hwif = ide_find_port_slot(&d);
+ if (hwif == NULL)
+ return -ENOENT;
+
/* Setup MMIO ops */
default_hwif_mmiops(hwif);
hwif->OUTBSYNC = pmac_outbsync;
ide_init_port_hw(hwif, hw);
- printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
- hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
- pmif->mediabay ? " (mediabay)" : "", hwif->irq);
-
idx[0] = hwif->index;
ide_device_add(idx, &d);
@@ -1112,7 +1120,6 @@ pmac_ide_macio_attach(struct macio_dev *
{
void __iomem *base;
unsigned long regbase;
- ide_hwif_t *hwif;
pmac_ide_hwif_t *pmif;
int irq, rc;
hw_regs_t hw;
@@ -1121,14 +1128,6 @@ pmac_ide_macio_attach(struct macio_dev *
if (pmif == NULL)
return -ENOMEM;
- hwif = ide_find_port();
- if (hwif == NULL) {
- printk(KERN_ERR "ide-pmac: MacIO interface attach with no slot\n");
- printk(KERN_ERR " %s\n", mdev->ofdev.node->full_name);
- rc = -ENODEV;
- goto out_free_pmif;
- }
-
if (macio_resource_count(mdev) == 0) {
printk(KERN_WARNING "ide-pmac: no address for %s\n",
mdev->ofdev.node->full_name);
@@ -1183,7 +1182,7 @@ pmac_ide_macio_attach(struct macio_dev *
hw.dev = &mdev->bus->pdev->dev;
hw.parent = &mdev->ofdev.dev;
- rc = pmac_ide_setup_device(pmif, hwif, &hw);
+ rc = pmac_ide_setup_device(pmif, &hw);
if (rc != 0) {
/* The inteface is released to the common IDE layer */
dev_set_drvdata(&mdev->ofdev.dev, NULL);
@@ -1242,7 +1241,6 @@ pmac_ide_macio_resume(struct macio_dev *
static int __devinit
pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
{
- ide_hwif_t *hwif;
struct device_node *np;
pmac_ide_hwif_t *pmif;
void __iomem *base;
@@ -1260,14 +1258,6 @@ pmac_ide_pci_attach(struct pci_dev *pdev
if (pmif == NULL)
return -ENOMEM;
- hwif = ide_find_port();
- if (hwif == NULL) {
- printk(KERN_ERR "ide-pmac: PCI interface attach with no slot\n");
- printk(KERN_ERR " %s\n", np->full_name);
- rc = -ENODEV;
- goto out_free_pmif;
- }
-
if (pci_enable_device(pdev)) {
printk(KERN_WARNING "ide-pmac: Can't enable PCI device for "
"%s\n", np->full_name);
@@ -1304,7 +1294,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev
hw.irq = pdev->irq;
hw.dev = &pdev->dev;
- rc = pmac_ide_setup_device(pmif, hwif, &hw);
+ rc = pmac_ide_setup_device(pmif, &hw);
if (rc != 0) {
/* The inteface is released to the common IDE layer */
pci_set_drvdata(pdev, NULL);
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
