Linux IDE Archive
[Prev Page][Next Page]
- Re: [PATCH] ata: blacklist FUJITSU MHW2160BH PL
- Re: problem with sata_nv and SATA<>PATA bridge (2.6.18/2.6.24)
- [2.6 patch] export ide_doubler
- [2.6 patch] fix BLK_DEV_HD_ONLY on ARM dependencies
- Re: [PATCH v2 -mm 4/6] ide: avoid DMA on the stack for REQ_TYPE_ATA_PC
- [PATCH #upstream-fixes] ahci: workarounds for mcp65
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
- From: Hemmann, Volker Armin
- Re: ata_piix on MacBook4,1: CD/DVD drive often fails to work
- Re: ata_piix on MacBook4,1: CD/DVD drive often fails to work
- From: MATSUBAYASHI, 'Shaolin' Kohji
- ata_piix on MacBook4,1: CD/DVD drive often fails to work
- From: MATSUBAYASHI, 'Shaolin' Kohji
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
- Re: [PATCH] Support SB700 SATA controller PMP
- Re: [PATCH] SB600 SATA controller PMP support
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: regarding crazy head unloads
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: Port Multiplier drives not always all found on cold plug
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] swarm: use struct ide_port_info
- [PATCH] palm_bk3710: add warm-plug support
- From: Bartlomiej Zolnierkiewicz
- Re: 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc
- [Bug 10715] 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc
- [Bug 10715] 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc
- Re: [stable] [patch 10/50] libata: force hardreset if link is in powersave mode
- Re: ide cdrom problems on new imac
- Marvell 6141 on an ASUS M2N32-WS Motherboard
- Re: [PATCH v2 -mm 4/6] ide: avoid DMA on the stack for REQ_TYPE_ATA_PC
- Re: [patch 10/50] libata: force hardreset if link is in powersave mode
- Re: [stable] [patch 10/50] libata: force hardreset if link is in powersave mode
- Re: ide cdrom problems on new imac
- Re: [patch 10/50] libata: force hardreset if link is in powersave mode
- [patch 10/50] libata: force hardreset if link is in powersave mode
- Re: [PATCH 4/4] ide: tighten checks on PCI BARs in ide_hwif_configure()
- [PATCH 4/4] ide: tighten checks on PCI BARs in ide_hwif_configure()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 2/4] icside: use ide_init_port_hw()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 3/4] sgiioc4: use driver name for resource allocation
- From: Bartlomiej Zolnierkiewicz
- [PATCH 1/4] icside: don't use hwif->hwif_data
- From: Bartlomiej Zolnierkiewicz
- Re: ide cdrom problems on new imac
- Re: 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc
- From: Bartlomiej Zolnierkiewicz
- ide cdrom problems on new imac
- Re: 2.6.26-rc5 DOA on mac g5
- 2.6.26-rc5 DOA on mac g5
- Re: 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc
- Re: [Bugme-new] [Bug 10860] New: total system freeze at boot with 2.6.26-rc
- Re: [PATCH v2 -mm 4/6] ide: avoid DMA on the stack for REQ_TYPE_ATA_PC
- Re: [PATCH v2 -mm 4/6] ide: avoid DMA on the stack for REQ_TYPE_ATA_PC
- Re: patch "libata-sff: Fix oops for pnp devices with no ctl" causes regression
- Re: patch "libata-sff: Fix oops for pnp devices with no ctl" causes regression
- Re: patch "libata-sff: Fix oops for pnp devices with no ctl" causes regression
- Re: patch "libata-sff: Fix oops for pnp devices with no ctl" causes regression
- [PATCH] Support SB700 SATA controller PMP
- Re: patch "libata-sff: Fix oops for pnp devices with no ctl" causes regression
- patch "libata-sff: Fix oops for pnp devices with no ctl" causes regression
- Re: 2.6.25: sata_sil freezes, hard resets port.
- Re: [Bugme-new] [Bug 10854] New: CDROM is nor detected with libata and 3Ware.
- Re: [RFC] expand link_power_management_policy definition
- From: Kristen Carlson Accardi
- Re: [RFC PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- [git patches] libata fixes
- Re: [PATCH 1/5] libata: kill unused constants
- Re: [PATCH 01/01] sata_mv: PHY_MODE4 cleanups
- Re: [PATCH] ata acer short cable quirks
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH 7/9] au1xxx-ide: don't use hwif->hwif_data
- Re: [PATCH 6/9] delkin_cb: add missing __init/__exit tags
- Re: [PATCH 3/9] delkin_cb: set proper hwif->gendev.parent value
- Re: [PATCHSET #upstream] libata: improve timeout handling for EH commands
- [PATCH] SB600 SATA controller PMP support
- Re: [RFC] expand link_power_management_policy definition
- [RFC] expand link_power_management_policy definition
- From: Kristen Carlson Accardi
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: Mounting CF flash card in 2.6.25
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCHSET #upstream] libata: improve timeout handling for EH commands
- Re: [patch] libata:ahci: enclosure management support (resend)
- Re: Mounting CF flash card in 2.6.25
- [patch] libata:ahci: enclosure management support (resend)
- From: Kristen Carlson Accardi
- Re: Mounting CF flash card in 2.6.25
- [PATCH] ata acer short cable quirks
- [PATCH] ata: blacklist FUJITSU MHW2160BH PL
- Re: [PATCH] ata: ahci: power off unused ports
- From: Kristen Carlson Accardi
- Re: Mounting CF flash card in 2.6.25
- Re: Mounting CF flash card in 2.6.25
- Re: Mounting CF flash card in 2.6.25
- RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
- Mounting CF flash card in 2.6.25
- hdparm-8.7 is released
- Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
- [PATCH 9/9] ide-cs: use struct ide_port_info
- From: Bartlomiej Zolnierkiewicz
- [PATCH 8/9] ide_4drives: use struct ide_port_info
- From: Bartlomiej Zolnierkiewicz
- [PATCH 7/9] au1xxx-ide: don't use hwif->hwif_data
- From: Bartlomiej Zolnierkiewicz
- [PATCH 6/9] delkin_cb: add missing __init/__exit tags
- From: Bartlomiej Zolnierkiewicz
- [PATCH 5/9] delkin_cb: add warm-plug support
- From: Bartlomiej Zolnierkiewicz
- [PATCH 4/9] delkin_cb: use struct ide_port_info
- From: Bartlomiej Zolnierkiewicz
- [PATCH 3/9] delkin_cb: set proper hwif->gendev.parent value
- From: Bartlomiej Zolnierkiewicz
- [PATCH 2/9] ide: set hwif->dev in ide_init_port_hw()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 1/9] ide: fix host drivers missing hwif->chipset initialization
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
- Re: [PATCH] ata: ahci: power off unused ports
- Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
- Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
- Re: [PATCH v2 -mm 4/6] ide: avoid DMA on the stack for REQ_TYPE_ATA_PC
- Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
- Re: [PATCH] ata: ahci: power off unused ports
- Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
- Re: [PATCH] ata: ahci: power off unused ports
- Re: [PATCH] ata: ahci: power off unused ports
- Re: [PATCH] ata: ahci: power off unused ports
- Re: [PATCH] ata: ahci: power off unused ports
- Re: [PATCH] ata: ahci: power off unused ports
- From: Kristen Carlson Accardi
- Re: [PATCH] ata: ahci: power off unused ports
- Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
- Re: [PATCH] ata: ahci: power off unused ports
- From: Kristen Carlson Accardi
- Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
- Re: [PATCH] ata: ahci: power off unused ports
- Re: [PATCH] ata: ahci: power off unused ports
- Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
- Re: [PATCH] ata: ahci: power off unused ports
- From: Kristen Carlson Accardi
- Re: [PATCH] ata: ahci: power off unused ports
- Re: [PATCH] ata: ahci: power off unused ports
- From: Kristen Carlson Accardi
- Re: [PATCH] ata: ahci: power off unused ports
- From: Kristen Carlson Accardi
- Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
- Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
- Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
- Re: [PATCH] ata: ahci: power off unused ports
- [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
- Re: [PATCH] ata: ahci: power off unused ports
- Re: [PATCH] ata: ahci: power off unused ports
- Re: [PATCH 19/21] ide: move ide_pio_cycle_time() to ide-timings.c
- Re: [PATCH 03/21] ide: use u8 for xfer modes in ide-timing.h
- Re: [PATCH 02/21] ide: remove unused XFER_UDMA_SLOW
- Re: [PATCH 20/21] ide: remove no longer used ide_pio_timings[]
- Re: [PATCH 18/21] ide-pmac: convert to use ide_timing_find_mode()
- Re: [PATCH 16/21] sl82c105: convert to use ide_timing_find_mode()
- Re: [PATCH 15/21] opti621: convert to use ide_timing_find_mode()
- Re: [PATCH 14/21] cy82c693: convert to use ide_timing_find_mode()
- Re: [PATCH 13/21] cmd64x: convert to use ide_timing_find_mode()
- Re: [PATCH 12/21] cmd640: convert to use ide_timing_find_mode()
- Re: [PATCH 12/21] cmd640: convert to use ide_timing_find_mode()
- Re: [PATCH 11/21] alim15x3: convert to use ide_timing_find_mode()
- Re: [PATCH 10/21] qd65xx: convert to use ide_timing_find_mode()
- Re: [PATCH 09/21] ht6560b: convert to use ide_timing_find_mode()
- Re: [PATCH 08/21] ali14xx: convert to use ide_timing_find_mode()
- Re: regarding crazy head unloads
- From: Scott James Remnant
- Re: [PATCH] ata: ahci: power off unused ports
- Re: [PATCH] ata: ahci: power off unused ports
- Re: [PATCH] ata: ahci: power off unused ports
- [PATCH v2 -mm 1/6] block: add blk_queue_update_dma_pad
- [PATCH v2 -mm 6/6] cdrom: revert commit 22a9189 (cdrom: use kmalloced buffers instead of buffers on stack)
- [PATCH v2 -mm 2/6] ide: use the dma safe check for REQ_TYPE_ATA_PC
- [PATCH v2 -mm 5/6] scsi: sr avoids useless buffer allocation
- [PATCH v2 -mm 4/6] ide: avoid DMA on the stack for REQ_TYPE_ATA_PC
- [PATCH v2 -mm 3/6] block: blk_rq_map_kern uses the bounce buffers for stack buffers
- [PATCH v2 -mm 0/6] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack)
- Re: [PATCH] ata: ahci: power off unused ports
- Re: Port Multiplier drives not always all found on cold plug
- Why my USB disk drive is mounted "WriteProtect is on"?
- Re: [PATCH] ata: ahci: power off unused ports
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] ata: ahci: power off unused ports
- Re: Correct partition table geometry?(Story included)
- [PATCH 01/01] sata_mv: PHY_MODE4 cleanups
- [PATCH] ide-generic: add missing hwif->chipset setup
- From: Bartlomiej Zolnierkiewicz
- Re: Correct partition table geometry?(Story included)
- Correct partition table geometry?(Story included)
- Wasn't thinking (Was: Correct partition table geometry?)
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
- Re: [PATCH 02/03] sata_mv: PHY_MODEx errata fixes
- Re: [RFC PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- [git patches] libata fixes
- Re: [PATCH] ahci: change the Device IDs of nvidia MCP7B AHCI controller in ahci.c
- Re: [PATCH] Add port multiplier (PMP) support in sata_fsl driver
- Re: [PATCH #upstream-fixes] libata: SRST can't be trusted on PMP sil3726
- Re: [PATCH] libata: fix libata-scsi kernel-doc notation
- Re: [PATCH v2.6.26-rc4] ata: Convert deprecated static spinlock_t lock instance to static DEFINE_SPINLOCK(lock)
- Re: [PATCH #upstream-fixes] ata_piix: fix macbook ich8m problems
- Re: [PATCH 02/03] sata_mv: PHY_MODEx errata fixes
- Re: [PATCH 01/03] sata_mv: move SOC_FLAG to hpriv
- [PATCH 3/9] pcmcia: add another pata/ide ID
- [PATCH 1/9] pcmcia: add an pata/ide ID
- Re: 2.6.25: sata_sil freezes, hard resets port.
- problem with sata_nv and SATA<>PATA bridge (2.6.18/2.6.24)
- Re: [PATCH 05/37] ata: use get/put_endian helpers
- Re: [PATCH 06/21] ide: checkpatch.pl fixes for ide-timing.h
- Re: [PATCH 05/21] ide: remove XFER_* masks from ide-timing.h
- Re: [PATCH 04/21] ide: move some bits from ide-timing.h to <linux/ide.h>
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
- From: Hemmann, Volker Armin
- Re: 2.6.25: sata_sil freezes, hard resets port.
- Re: 2.6.25: sata_sil freezes, hard resets port.
- Re: kernel 2.6.25 with ide driver cs5520 does not boot.
- Re: [PATCH 05/37] ata: use get/put_endian helpers
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
- Re: [PATCH 05/37] ata: use get/put_endian helpers
- Re: [PATCH 05/37] ata: use get/put_endian helpers
- Re: [PATCH 05/37] ata: use get/put_endian helpers
- Re: [PATCH 05/37] ata: use get/put_endian helpers
- Re: [PATCH 05/37] ata: use get/put_endian helpers
- Re: [PATCH 05/37] ata: use get/put_endian helpers
- Re: [PATCH 05/37] ata: use get/put_endian helpers
- Re: [PATCH 14/40] ide-floppy: merge idefloppy_transfer_pc() and idefloppy_transfer_pc1()
- From: Bartlomiej Zolnierkiewicz
- Re: [RFC PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- Re: [RFC PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- Re: [RFC PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- [RFC PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- [Bug 10803] Kernel freeze on accesing CD-ROM or HDD
- Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- [PATCH 05/37] ata: use get/put_endian helpers
- Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- [Bug 10803] Kernel freeze on accesing CD-ROM or HDD
- Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- [PATCH v2.6.26-rc4] ata: Convert deprecated static spinlock_t lock instance to static DEFINE_SPINLOCK(lock)
- From: Pradeep Singh Rautela
- Re: [PATCH] libata: Handle bay devices in dock stations
- From: Henrique de Moraes Holschuh
- Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] libata: Handle bay devices in dock stations
- RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
- From: Hemmann, Volker Armin
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCH] libata: Handle bay devices in dock stations
- [PATCH #upstream-fixes] ata_piix: fix macbook ich8m problems
- Re: ata_piix on MacBook4,1: fail to startup in a certain situation
- Re: ata_piix on MacBook4,1: fail to startup in a certain situation
- From: MATSUBAYASHI 'Shaolin' Kohji
- Re: ata_piix on MacBook4,1: fail to startup in a certain situation
- Re: ata_piix on MacBook4,1: fail to startup in a certain situation
- From: MATSUBAYASHI 'Shaolin' Kohji
- Re: ata_piix on MacBook4,1: fail to startup in a certain situation
- Re: [BUG ?] kmalloc() with GFP_KERNEL while holding spinlock ?
- Re: [BUG ?] kmalloc() with GFP_KERNEL while holding spinlock ?
- Re: ata_piix on MacBook4,1: fail to startup in a certain situation
- From: MATSUBAYASHI 'Shaolin' Kohji
- [BUG ?] kmalloc() with GFP_KERNEL while holding spinlock ?
- RE: [PATCHSET #upstream-fixes] git tree available
- From: Brian & Chamaigne Scamman
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCHSET #upstream-fixes] git tree available
- Re: [PATCH] libata: Handle bay devices in dock stations
- Re: [PATCHSET #upstream] libata: improve timeout handling for EH commands
- Re: [PATCH #upstream-fixes] libata: SRST can't be trusted on PMP sil3726
- Re: ata_piix on MacBook4,1: fail to startup in a certain situation
- Re: ata_piix on MacBook4,1: fail to startup in a certain situation
- From: MATSUBAYASHI 'Shaolin' Kohji
- Re: ata_piix on MacBook4,1: fail to startup in a certain situation
- Re: Linux 2.6.26-rc4
- Re: ata_piix on MacBook4,1: fail to startup in a certain situation
- From: MATSUBAYASHI 'Shaolin' Kohji
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
- [PATCH 19/21] ide: move ide_pio_cycle_time() to ide-timings.c
- From: Bartlomiej Zolnierkiewicz
- [PATCH 20/21] ide: remove no longer used ide_pio_timings[]
- From: Bartlomiej Zolnierkiewicz
- [PATCH 21/21] ide: move PIO blacklist to ide-pio-blacklist.c
- From: Bartlomiej Zolnierkiewicz
- [PATCH 18/21] ide-pmac: convert to use ide_timing_find_mode()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 17/21] ide-mpc8xx: convert to use ide_timing_find_mode()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 16/21] sl82c105: convert to use ide_timing_find_mode()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 15/21] opti621: convert to use ide_timing_find_mode()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 14/21] cy82c693: convert to use ide_timing_find_mode()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 13/21] cmd64x: convert to use ide_timing_find_mode()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 12/21] cmd640: convert to use ide_timing_find_mode()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 11/21] alim15x3: convert to use ide_timing_find_mode()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 10/21] qd65xx: convert to use ide_timing_find_mode()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 09/21] ht6560b: convert to use ide_timing_find_mode()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 08/21] ali14xx: convert to use ide_timing_find_mode()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 07/21] ide: convert ide-timing.h to ide-timings.c library
- From: Bartlomiej Zolnierkiewicz
- [PATCH 06/21] ide: checkpatch.pl fixes for ide-timing.h
- From: Bartlomiej Zolnierkiewicz
- [PATCH 05/21] ide: remove XFER_* masks from ide-timing.h
- From: Bartlomiej Zolnierkiewicz
- [PATCH 04/21] ide: move some bits from ide-timing.h to <linux/ide.h>
- From: Bartlomiej Zolnierkiewicz
- [PATCH 03/21] ide: use u8 for xfer modes in ide-timing.h
- From: Bartlomiej Zolnierkiewicz
- [PATCH 02/21] ide: remove unused XFER_UDMA_SLOW
- From: Bartlomiej Zolnierkiewicz
- [PATCH 01/21] ide: remove needless includes from ide-lib.c
- From: Bartlomiej Zolnierkiewicz
- [PATCH 00/21] ide: convert ide-timing.h to ide-timings.c library
- From: Bartlomiej Zolnierkiewicz
- [PATCH 05/05] sata_mv: implement SoC guideline SATA_S11
- [PATCH 04/04] sata_mv: workaround for 60x1 errata sata13
- Re: [PATCH] libata: Handle bay devices in dock stations
- [PATCH] libata: Handle bay devices in dock stations
- Re: ata_piix on MacBook4,1: fail to startup in a certain situation
- Re: ata_piix on MacBook4,1: fail to startup in a certain situation
- From: MATSUBAYASHI 'Shaolin' Kohji
- Re: [PATCH 3/4] ide: use the dma safe check for REQ_TYPE_ATA_PC
- Re: [PATCH] ata: ahci: power off unused ports
- From: Kristen Carlson Accardi
- Re: [PATCH] ata: ahci: power off unused ports
- [PATCH 03/03] sata_mv: nuke unreleased GenIIe revisions
- [PATCH 02/03] sata_mv: PHY_MODEx errata fixes
- [PATCH 01/03] sata_mv: move SOC_FLAG to hpriv
- Re: [PATCH] ata: ahci: power off unused ports
- From: Kristen Carlson Accardi
- [Bug 10803] Kernel freeze on accesing CD-ROM or HDD
- [Bug 10803] Kernel freeze on accesing CD-ROM or HDD
- Re: [PATCH] ata: ahci: power off unused ports
- [Bug 10803] New: Kernel freeze on accesing CD-ROM or HDD
- Re: Linux 2.6.26-rc4
- Re: [PATCH 14/40] ide-floppy: merge idefloppy_transfer_pc() and idefloppy_transfer_pc1()
- Re: Marvell 88SX7042 [4 Port SATA PCI-Express x4] Support/Questions
- [PATCH] sis5513: add missing pci_enable_device() call
- From: Bartlomiej Zolnierkiewicz
- [PATCH] block: handle blk_pm_resume_request() requests in blk_execute_rq_nowait()
- From: Bartlomiej Zolnierkiewicz
- [PATCH] ide: use __generic_unplug_device() in ide_do_drive_cmd() (take 2)
- From: Bartlomiej Zolnierkiewicz
- Re: [RFC: 2.6 patch] remove BLK_DEV_HD_ONLY
- Re: [RFC: 2.6 patch] remove BLK_DEV_HD_ONLY
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 0/4] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack)
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 22/40] ide-floppy: start DMA engine in idefloppy_transfer_pc1()
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 14/40] ide-floppy: merge idefloppy_transfer_pc() and idefloppy_transfer_pc1()
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 04/22] ide: add ide_deprecated_find_port() helper
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 04/40] ide-scsi: fix Interrupt Reason checking in idescsi_pc_intr()
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 0/4] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack)
- [Bug 10749] IDE sis5513: the system doesn't shutdown
- [Bug 10749] IDE sis5513: the system doesn't shutdown
- Re: Marvell 88SX7042 [4 Port SATA PCI-Express x4] Support/Questions
- Re: Marvell 88SX7042 [4 Port SATA PCI-Express x4] Support/Questions
- Marvell 88SX7042 [4 Port SATA PCI-Express x4] Support/Questions
- Re: [KERNEL] Re: Bug in libata
- Re: [PATCH 00/40] ide: generic ATAPI support
- From: Bartlomiej Zolnierkiewicz
- Re: [RFC: 2.6 patch] MAINTAINERS: remove SIS 5513 IDE entry
- From: Bartlomiej Zolnierkiewicz
- Re: Bug in libata
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
- Re: regarding crazy head unloads
- RE: [PATCH] Add port multiplier (PMP) support in sata_fsl driver
- regarding crazy head unloads
- Re: [PATCHSET #upstream-fixes] git tree available
- RE: [PATCHSET #upstream-fixes] git tree available
- From: Brian & Chamaigne Scamman
- Re: [PATCH 0/4] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack)
- Re: [PATCH 2.6.26-rc2 1/3] sata_promise: fix irq clearing buglets
- Re: [PATCH 00/40] ide: generic ATAPI support
- Re: [PATCH] Add port multiplier (PMP) support in sata_fsl driver
- Re: Drives not detected: sil3124 PMP to sil4726 5 drive enclosure
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 0/4] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack)
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 0/4] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack)
- Re: [PATCHSET #upstream-fixes] git tree available
- Re: [PATCH] Fixups to ATA ACPI hotplug
- Re: [PATCH 0/4] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack)
- From: Thomas Bogendoerfer
- RE: [PATCHSET #upstream-fixes] git tree available
- From: Brian & Chamaigne Scamman
- Drives not detected: sil3124 PMP to sil4726 5 drive enclosure
- Re: [PATCH] ata: fix sleep-while-holding-spinlock in sata_nv
- Re: [PATCH] ata: fix sleep-while-holding-spinlock in sata_nv
- Re: [PATCH 04/22] ide: add ide_deprecated_find_port() helper
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- RE: [PATCHSET #upstream-fixes] git tree available
- From: Brian & Chamaigne Scamman
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 2.6.26-rc2 1/3] sata_promise: fix irq clearing buglets
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: Fwd: confusion about libata.force=80c
- Re: [PATCH 14/40] ide-floppy: merge idefloppy_transfer_pc() and idefloppy_transfer_pc1()
- [PATCH #upstream-fixes] libata: SRST can't be trusted on PMP sil3726
- Re: [PATCHSET #upstream-fixes] git tree available
- Re: [PATCH] ata: fix sleep-while-holding-spinlock in sata_nv
- Re: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH] ata: fix sleep-while-holding-spinlock in sata_nv
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- RE: [PATCHSET #upstream-fixes] git tree available
- From: Brian & Chamaigne Scamman
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- [PATCH] ata: fix sleep-while-holding-spinlock in sata_nv
- Re: [PATCH 2.6.26-rc2 1/3] sata_promise: fix irq clearing buglets
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
- Re: [PATCHSET #upstream-fixes] git tree available
- Re: [PATCH] Fixups to ATA ACPI hotplug
- Re: [PATCH] Fixups to ATA ACPI hotplug
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH] Fixups to ATA ACPI hotplug
- Re: [PATCH] Fixups to ATA ACPI hotplug
- RE: [PATCHSET #upstream-fixes] git tree available
- From: Brian & Chamaigne Scamman
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 22/40] ide-floppy: start DMA engine in idefloppy_transfer_pc1()
- Re: [PATCH] Fixups to ATA ACPI hotplug
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- Fwd: confusion about libata.force=80c
- Re: [PATCH 2.6.26-rc2 1/3] sata_promise: fix irq clearing buglets
- Re: [PATCH] Fixups to ATA ACPI hotplug
- Re: [PATCH 4/4] cdrom: revert commit 22a9189 (cdrom: use kmalloced buffers instead of buffers on stack)
- Re: [PATCH 4/4] cdrom: revert commit 22a9189 (cdrom: use kmalloced buffers instead of buffers on stack)
- Re: [PATCH] Fixups to ATA ACPI hotplug
- Re: [PATCH 4/4] cdrom: revert commit 22a9189 (cdrom: use kmalloced buffers instead of buffers on stack)
- [PATCH] Add port multiplier (PMP) support in sata_fsl driver
- [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
- [PATCH 2/4] block: add blk_queue_update_dma_pad
- [PATCH 4/4] cdrom: revert commit 22a9189 (cdrom: use kmalloced buffers instead of buffers on stack)
- [PATCH 0/4] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack)
- [PATCH 3/4] ide: use the dma safe check for REQ_TYPE_ATA_PC
- Re: [PATCHSET #upstream-fixes] git tree available
- Re: [PATCHSET #upstream-fixes] git tree available
- Re: [PATCH 5/5] libata: improve EH internal command timeout handling
- Re: [PATCH 2/5] libata: consistently use msecs for time durations
- Re: [PATCH 3/5] libata: improve EH retry delay handling
- Re: [PATCHSET #upstream-fixes] git tree available
- Re: Re: [PATCH] ahci: change the Device IDs of nvidia MCP7B AHCI controllerin ahci.c
- RE: [PATCHSET #upstream-fixes] git tree available
- From: Brian & Chamaigne Scamman
- Re: [Bugme-new] [Bug 10752] New: pata_isapnp driver causes the ata layer to go splat
- [PATCH -resend] libata: fix kernel-doc params notation
- [git patches] libata updates
- Re: PROBLEM: Error messages on resume from memory/disk.
- Re: [RFC: 2.6 patch] MAINTAINERS: remove SIS 5513 IDE entry
- Re: [PATCH 2/5] libata: consistently use msecs for time durations
- Re: [Bugme-new] [Bug 10752] New: pata_isapnp driver causes the ata layer to go splat
- RE: Oops with PREEMPT-RT on 2.6.25.4
- [RFC: 2.6 patch] MAINTAINERS: remove SIS 5513 IDE entry
- RE: Oops with PREEMPT-RT on 2.6.25.4
- Re: [RFC: 2.6 patch] remove BLK_DEV_HD_ONLY
- Re: How to mount a CD created on Vista?
- From: James Courtier-Dutton
- [RFC: 2.6 patch] remove BLK_DEV_HD_ONLY
- Re: [PATCH 01/10] libata: fix sata_link_hardreset() @online out parameter handling
- Re: [PATCH 05/10] libata: ignore recovered PHY errors
- Re: Oops with PREEMPT-RT on 2.6.25.4
- RE: Oops with PREEMPT-RT on 2.6.25.4
- Re: [PATCH 2.6.26-rc2 1/3] sata_promise: fix irq clearing buglets
- Re: [PATCH 2.6.26-rc2 1/3] sata_promise: fix irq clearing buglets
- Re: [patch 1/1] ata: remove FIT() macro
- Re: [PATCH 1/1] [libata] pata-bf54x: Set ATAPI host state machine to control IDE device terminate sequence.
- Re: [PATCH 10/10] sata_mv: ensure empty request queue for FBS-NCQ EH
- Re: [PATCH 10/10] sata_mv: ensure empty request queue for FBS-NCQ EH
- Re: Oops with PREEMPT-RT on 2.6.25.4
- RE: Oops with PREEMPT-RT on 2.6.25.4
- Re: Oops with PREEMPT-RT on 2.6.25.4
- Re: SATA 2.4 ICH8
- Re: Oops with PREEMPT-RT on 2.6.25.4
- RE: Oops with PREEMPT-RT on 2.6.25.4
- Re: Oops with PREEMPT-RT on 2.6.25.4
- Oops with PREEMPT-RT on 2.6.25.4
- Re: [PATCH] ahci: change the Device IDs of nvidia MCP7B AHCI controller in ahci.c
- Re: [PATCH 5/5] libata: improve EH internal command timeout handling
- Re: [PATCH 5/5] libata: improve EH internal command timeout handling
- Re: [PATCH 3/5] libata: improve EH retry delay handling
- Re: [PATCH 09/09] sata_mv cache main_irq_mask register in hpriv
- [PATCH 5/5] libata: improve EH internal command timeout handling
- [PATCH 4/5] libata: use ULONG_MAX to terminate reset timeout table
- [PATCH 2/5] libata: consistently use msecs for time durations
- [PATCH 3/5] libata: improve EH retry delay handling
- [PATCHSET #upstream] libata: improve timeout handling for EH commands
- [PATCH 1/5] libata: kill unused constants
- [PATCH] Fixups to ATA ACPI hotplug
- [PATCH 10/10] sata_mv: ensure empty request queue for FBS-NCQ EH
- SATA disk dies and revives after boot
- From: Jan Evert van Grootheest
- [PATCH] ahci: change the Device IDs of nvidia MCP7B AHCI controller in ahci.c
- Re: SATA 2.4 ICH8
- Re: [PATCH 04/40] ide-scsi: fix Interrupt Reason checking in idescsi_pc_intr()
- Re: PROBLEM: Error messages on resume from memory/disk.
- Re: [PATCH 09/10] sata_sil24: don't use NCQ if marvell 4140 PMP is attached
- [patch 08/18] m68k: macide doesnt check for Mac
- [PATCH 40/40] ide: add ide_pc_intr() helper
- From: Bartlomiej Zolnierkiewicz
- [PATCH 39/40] ide-{floppy,scsi}: read Status Register before stopping DMA engine
- From: Bartlomiej Zolnierkiewicz
- [PATCH 38/40] ide-scsi: add more debugging to idescsi_pc_intr()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 37/40] ide-scsi: use pc->callback
- From: Bartlomiej Zolnierkiewicz
- [PATCH 36/40] ide-floppy: add more debugging to idefloppy_pc_intr()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 35/40] ide-tape: always log debug info in idetape_pc_intr() if debugging is enabled
- From: Bartlomiej Zolnierkiewicz
- [PATCH 34/40] ide-tape: add ide_tape_io_buffers() helper
- From: Bartlomiej Zolnierkiewicz
- [PATCH 33/40] ide-tape: factor out DSC handling from idetape_pc_intr()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 32/40] ide-{floppy,tape}: move checking of ->failed_pc to ->callback
- From: Bartlomiej Zolnierkiewicz
- [PATCH 31/40] ide: add ide_issue_pc() helper
- From: Bartlomiej Zolnierkiewicz
- [PATCH 30/40] ide: add PC_FLAG_DRQ_INTERRUPT pc flag
- From: Bartlomiej Zolnierkiewicz
- [PATCH 29/40] ide-scsi: move idescsi_map_sg() call out from idescsi_issue_pc()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 28/40] ide: add ide_transfer_pc() helper
- From: Bartlomiej Zolnierkiewicz
- [PATCH 27/40] ide-scsi: set drive->scsi flag for devices handled by the driver
- From: Bartlomiej Zolnierkiewicz
- [PATCH 26/40] ide-{cd,floppy,tape}: remove checking for drive->scsi
- From: Bartlomiej Zolnierkiewicz
- [PATCH 25/40] ide: add PC_FLAG_ZIP_DRIVE pc flag
- From: Bartlomiej Zolnierkiewicz
- [PATCH 24/40] ide-tape: factor out waiting for good ireason from idetape_transfer_pc()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 23/40] ide-tape: set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 22/40] ide-floppy: start DMA engine in idefloppy_transfer_pc1()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 21/40] ide-{floppy,tape}: PC_FLAG_DMA_RECOMMENDED -> PC_FLAG_DMA_OK
- From: Bartlomiej Zolnierkiewicz
- [PATCH 20/40] ide-{floppy,tape}: merge pc->idefloppy_callback and pc->idetape_callback
- From: Bartlomiej Zolnierkiewicz
- [PATCH 19/40] ide-floppy: merge callbacks
- From: Bartlomiej Zolnierkiewicz
- [PATCH 18/40] ide-tape: make pc->idetape_callback void
- From: Bartlomiej Zolnierkiewicz
- [PATCH 17/40] ide-tape: merge callbacks
- From: Bartlomiej Zolnierkiewicz
- [PATCH 16/40] ide-tape: make idetape_retry_pc() void
- From: Bartlomiej Zolnierkiewicz
- [PATCH 15/40] ide-{floppy,tape,scsi}: log device name instead of driver name
- From: Bartlomiej Zolnierkiewicz
- [PATCH 14/40] ide-floppy: merge idefloppy_transfer_pc() and idefloppy_transfer_pc1()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 13/40] ide-tape: remove SIMULATE_ERRORS debug code
- From: Bartlomiej Zolnierkiewicz
- [PATCH 12/40] ide-tape: remove stale comments from idetape_pc_intr()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 11/40] ide-tape: remove unneeded CONFIG_BLK_DEV_IDEDMA ifdef
- From: Bartlomiej Zolnierkiewicz
- [PATCH 10/40] ide-tape: remove superfluous warning message from idetape_issue_pc()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 09/40] ide-tape: remove superfluous error message from idetape_pc_intr()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 08/40] ide-tape: idetape_pc_intr() should use local_irq_enable_in_hardirq()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 07/40] ide-scsi: add debug_log() macro
- From: Bartlomiej Zolnierkiewicz
- [PATCH 06/40] ide-scsi: remove superfluous BUG_ON() from idescsi_transfer_pc()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 05/40] ide-scsi: merge idescsi_input_buffers() and idescsi_output_buffers()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 04/40] ide-scsi: fix Interrupt Reason checking in idescsi_pc_intr()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 03/40] ide-scsi: fix handling of DMA errors in idescsi_pc_intr()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 02/40] ide-scsi: fix DRQ checking for DMA transfers in idescsi_pc_intr()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 01/40] ide-scsi: fix race in idescsi_transfer_pc()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 00/40] ide: generic ATAPI support
- From: Bartlomiej Zolnierkiewicz
- Re: kernel 2.6.25 with ide driver cs5520 does not boot.
- From: Bartlomiej Zolnierkiewicz
- Re: PROBLEM: Error messages on resume from memory/disk.
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCHSET #upstream-fixes] git tree available
- [PATCH 10/10] libata: ignore SIMG4726 config pseudo device
- [PATCH 09/10] sata_sil24: don't use NCQ if marvell 4140 PMP is attached
- [PATCH 05/10] libata: ignore recovered PHY errors
- [PATCH 07/10] libata: make sure PMP notification is turned off during recovery
- [PATCH 06/10] libata: increase PMP register access timeout to 3s
- [PATCH 08/10] libata: don't schedule LPM action seperately during probing
- [PATCH 04/10] libata: kill hotplug related race condition
- [PATCHSET #upstream-fixes] libata: fix a bunch of PMP related problems
- [PATCH 03/10] libata: move reset freeze/thaw handling into ata_eh_reset()
- [PATCH 02/10] libata: reorganize ata_eh_reset() no reset method path
- [PATCH 01/10] libata: fix sata_link_hardreset() @online out parameter handling
- Re: Unable to access drives via PortMultiplier and SATA/IDE bridge
- Re: libata sata_via unusual behaviour
- Re: Port Multiplier drives not always all found on cold plug
- Re: [Bugme-new] [Bug 10738] New: sata_via hang and data corruption
- Re: kernel 2.6.25 with ide driver cs5520 does not boot.
- Re: libata sata_via unusual behaviour
- Re: Port Multiplier drives not always all found on cold plug
- RE: Unable to access drives via PortMultiplier and SATA/IDE bridge
- From: Brian & Chamaigne Scamman
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
- PROBLEM: Error messages on resume from memory/disk.
- Re: Port Multiplier drives not always all found on cold plug
- Re: [PATCH 05/09] sata_mv don't blindly enable IRQs
- Re: [PATCH 05/09] sata_mv don't blindly enable IRQs
- Re: [PATCH 05/09] sata_mv don't blindly enable IRQs
- [PATCH 09/09] sata_mv cache main_irq_mask register in hpriv
- [PATCH 08/09] sata_mv disregard masked irqs
- [PATCH 07/09] sata_mv fix pmp drives not found
- [PATCH 06/09] sata_mv consolidate main_irq_mask updates
- [PATCH 05/09] sata_mv don't blindly enable IRQs
- Re: Port Multiplier drives not always all found on cold plug
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
- [PATCH 2.6.26-rc2 3/3] sata_promise: other cleanups
- [PATCH 2.6.26-rc2 2/3] sata_promise: mmio access cleanups
- [PATCH 2.6.26-rc2 1/3] sata_promise: fix irq clearing buglets
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
- Re: Linux 2.6.24 sata_promise SATA300TX4 problems
- Re: libata sata_via unusual behaviour
- Re: Port Multiplier drives not always all found on cold plug
- Re: libata sata_via unusual behaviour
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
- Re: Oops: 0000 [#1] SMP //// HPT raid card 1740
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
- Re: 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 0/2] ide: ide_do_drive_cmd cleanups
- From: Bartlomiej Zolnierkiewicz
- HPA Problem in libata-core.c?
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
- Re: Port Multiplier drives not always all found on cold plug
- Re: Port Multiplier drives not always all found on cold plug
- Re: Port Multiplier drives not always all found on cold plug
- Re: Port Multiplier drives not always all found on cold plug
- [Bug 10723] New: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
- Port Multiplier drives not always all found on cold plug
- [Bug 10715] New: 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc
- patch libata-force-hardreset-if-link-is-in-powersave-mode.patch added to 2.6.25-stable tree
- Re: [PATCH] Palmchip BK3710 IDE driver
- 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc
- Re: Marvell 88SE6121 PATA in 2.6.25 (ahci)
- libata: force hardreset if link is in powersave mode
- Re: ata_piix 2.6.25 sata failure
- Re: [PATCH 01/12] lib: create common ascii hex array
- Re: ata_piix 2.6.25 sata failure
- Re: ata_piix 2.6.25 sata failure
- Re: [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
- Re: ata_std_qc_defer not good enough for FIS-based switching ?
- Re: ata_std_qc_defer not good enough for FIS-based switching ?
- Re: [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
- Re: [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
- [PATCH 1/2] ide-scsi: replace ide_do_drive_cmd with blk_execute_rq_nowait
- [PATCH 2/2] ide: remove action argument in ide_do_drive_cmd
- [PATCH 0/2] ide: ide_do_drive_cmd cleanups
- [patch 1/1] ata: remove FIT() macro
- Re: kernel 2.6.25 with ide driver cs5520 does not boot.
- From: Bartlomiej Zolnierkiewicz
- [git patches] IDE fixes
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 03/12] ide: use the common ascii hex helpers
- Re: [PATCH 03/12] ide: use the common ascii hex helpers
- From: Bartlomiej Zolnierkiewicz
- Re: sata_sx4 vs. Promise SX4060
- Re: kernel 2.6.25 with ide driver cs5520 does not boot.
- From: Bartlomiej Zolnierkiewicz
- Re: [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
- Re: [PATCH] LBA28/LBA48 off-by-one bug in ata.h
- confusion about libata.force=80c
- Re: Macbook Pro SATA Drives not seen in 2.6.25
- Re: ata_std_qc_defer not good enough for FIS-based switching ?
- Re: ata_std_qc_defer not good enough for FIS-based switching ?
- Re: ata_std_qc_defer not good enough for FIS-based switching ?
- Re: ata_std_qc_defer not good enough for FIS-based switching ?
- Re: ata_std_qc_defer not good enough for FIS-based switching ?
- [PATCH 04/04] sata_mv async notify for genIIe only
- [PATCH 03/04] sata_mv group genIIe flags
- [PATCH 02/04] sata_mv fis irq register fixes
- [PATCH 01/04] sata_mv always do softreset
- SOLVED: Macbook Pro SATA Drives not seen in 2.6.25
- Re: Port-Multiplier hotplug support: ATA_FLAG_AN
- Re: Macbook Pro SATA Drives not seen in 2.6.25
- Re: [PATCH 01/12] lib: create common ascii hex array
- Re: [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
- Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
- Re: Macbook Pro SATA Drives not seen in 2.6.25
- [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
- Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
- Re: sata_mv on Orion: CONFIG_SATA_PMP=y needed even when no multiplier
- Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
- Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
- Re: Port-Multiplier hotplug support: ATA_FLAG_AN
- Re: Port-Multiplier hotplug support: ATA_FLAG_AN
- Re: Port-Multiplier hotplug support: ATA_FLAG_AN
- Re: sata_mv on Orion: CONFIG_SATA_PMP=y needed even when no multiplier
- Port-Multiplier hotplug support: ATA_FLAG_AN
- Re: sata_mv on Orion: CONFIG_SATA_PMP=y needed even when no multiplier
- Re: sata_mv on Orion: CONFIG_SATA_PMP=y needed even when no multiplier
- Re: sata_mv on Orion: CONFIG_SATA_PMP=y needed even when no multiplier
- Re: libata NCQ implementation questions
- [patch 21/37] ata_piix: verify SIDPR access before enabling it
- SATA hotplug in 2.6.17-2?
- Re: [PATCH] LBA28/LBA48 off-by-one bug in ata.h
- patch ata_piix-verify-sidpr-access-before-enabling-it.patch added to 2.6.25-stable tree
- Re: Compact Flash Question
- Re: [PATCH 01/12] lib: create common ascii hex array
- Re: [PATCH 01/12] lib: create common ascii hex array
- Re: libata NCQ implementation questions
- Re: sata_mv on Orion: CONFIG_SATA_PMP=y needed even when no multiplier
- Re: libata NCQ implementation questions
- Re: libata NCQ implementation questions
- ata_piix 2.6.25 sata failure
- [PATCH -stable] ata_piix: verify SIDPR access before enabling it
- Re: [PATCH 01/12] lib: create common ascii hex array
- Re: libata NCQ implementation questions
- Re: sata_mv on Orion: mv_err_intr when shutting down
- [PATCH 03/12] ide: use the common ascii hex helpers
- [PATCH 01/12] lib: create common ascii hex array
- Re: libata NCQ implementation questions
- Re: sata_mv on Orion: CONFIG_SATA_PMP=y needed even when no multiplier
- Re: sata_mv on Orion: mv_err_intr when shutting down
- Re: sata_mv on Orion: mv_err_intr when shutting down
- Re: 2.6.24.*/2.6.25.*: attempt to access beyond end of device
- sata_mv on Orion: CONFIG_SATA_PMP=y needed even when no multiplier
- sata_mv on Orion: mv_err_intr when shutting down
- Re: libata NCQ implementation questions
- Re: 2.6.24.*/2.6.25.*: attempt to access beyond end of device
- Re: 2.6.24.*/2.6.25.*: attempt to access beyond end of device
- Re: [PATCH 1/1] [libata] pata-bf54x: Set ATAPI host state machine to control IDE device terminate sequence.
- 2.6.24.*/2.6.25.*: attempt to access beyond end of device
- [PATCH 1/1] [libata] pata-bf54x: Set ATAPI host state machine to control IDE device terminate sequence.
- Re: libata NCQ implementation questions
- Re: sata_promise.c:pdc_irq_clear() buglet?
- libata NCQ implementation questions
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]