If the port isn't either a drive bay or an external SATA port,
mark the port not-hotpluggable. This will cause libata to
power off the phy if it is unoccupied. This saves .75 watts
on most laptops. A module parameter can be used to override this
behavior and allow the phy's to be powered up regardless of whether it
has externally accessible SATA ports.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@xxxxxxxxx>
---
drivers/ata/ahci.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
Index: linux-ahci-phy/drivers/ata/ahci.c
===================================================================
--- linux-ahci-phy.orig/drivers/ata/ahci.c 2008-07-01 16:27:56.000000000 -0700
+++ linux-ahci-phy/drivers/ata/ahci.c 2008-07-01 16:35:03.000000000 -0700
@@ -53,9 +53,13 @@ static int ahci_skip_host_reset;
module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
+static int ahci_power_save = 1;
+module_param_named(power_save, ahci_power_save, int, 0444);
+MODULE_PARM_DESC(power_save, "Power off unused ports (0=don't power off, 1=power off)");
static int ahci_enable_alpm(struct ata_port *ap,
enum link_pm policy);
static void ahci_disable_alpm(struct ata_port *ap);
+static int ahci_is_hotplug_capable(struct ata_port *ap);
enum {
AHCI_PCI_BAR = 5,
@@ -168,6 +172,8 @@ enum {
PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
+ PORT_CMD_ESP = (1 << 21), /* External SATA Port */
+ PORT_CMD_HPCP = (1 << 18), /* port is hot plug capable */
PORT_CMD_PMP = (1 << 17), /* PMP attached */
PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
@@ -1998,6 +2004,18 @@ static int ahci_pci_device_resume(struct
}
#endif
+static int ahci_is_hotplug_capable(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u8 cmd;
+
+ if (!ahci_power_save)
+ return 1;
+
+ cmd = readl(port_mmio + PORT_CMD);
+ return ((cmd & PORT_CMD_HPCP) || (cmd & PORT_CMD_ESP));
+}
+
static int ahci_port_start(struct ata_port *ap)
{
struct device *dev = ap->host->dev;
@@ -2049,6 +2067,9 @@ static int ahci_port_start(struct ata_po
ap->private_data = pp;
+ /* set some flags based on port capabilities */
+ if (!ahci_is_hotplug_capable(ap))
+ ap->flags |= ATA_FLAG_NO_HOTPLUG;
/* engage engines, captain */
return ahci_port_resume(ap);
}
--
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
