Linux IDE Archive

• Thread Index

• [RFC 3/9]drivers:infiniband:ulp Change the copyright info.
  • From: Justin P. Mattock
• [RFC 2/9]drivers:infiniband:core Change the copyright info.
  • From: Justin P. Mattock
• [RFC 1/9]drivers:infiniband:hw:mthca Change the copyright info.
  • From: Justin P. Mattock
• [RFC 0/9] Change the copyright info.
  • From: Justin P. Mattock
• Re: sata_sil24: external raid storage mistaken as port multiplier
  • From: Mark Lord
• Re: sata_sil24: external raid storage mistaken as port multiplier
  • From: Tejun Heo
• Re: sata_sil24: external raid storage mistaken as port multiplier
  • From: Mark Lord
• Re: Faulty drive data recovery
  • From: Atila
• Re: AT91 IDE module
  • From: Stanislaw Gruszka
• Re: Faulty drive data recovery
  • From: Tejun Heo
• Re: Message
  • From: Tejun Heo
• Re: ata: hotplug not working with arasan CF controller driver
  • From: Tejun Heo
• Re: sata_sil24: external raid storage mistaken as port multiplier
  • From: Tejun Heo
• Re: kernel problems with smart on LSI-92xx
  • From: Artem Bokhan
• Re: Bigger discard payloads
  • From: Martin K. Petersen
• Re: Bigger discard payloads
  • From: Mark Lord
• Re: Message
  • From: Alessandro Tagliapietra
• Re: Message
  • From: Borislav Petkov
• Bigger discard payloads
  • From: Martin K. Petersen
• Re: AT91 IDE module
  • From: Radovan Vapeník
• Re: AT91 IDE module
  • From: Stanislaw Gruszka
• Re: Faulty drive data recovery
  • From: Greg Freemyer
• Re: Faulty drive data recovery
  • From: Artem Bokhan
• Faulty drive data recovery
  • From: Atila
• Re: AT91 IDE module
  • From: Radovan Vápeník
• Re: ata: hotplug not working with arasan CF controller driver
  • From: viresh kumar
• Re: sata_sil24: external raid storage mistaken as port multiplier
  • From: Tobias Karnat
• Re: AT91 IDE module
  • From: Stanislaw Gruszka
• Re: sata_sil24: external raid storage mistaken as port multiplier
  • From: Tobias Karnat
• [Bug 23602] New: Pata Controller on Asrock X58 Extreme 6 not detected
  • From: bugzilla-daemon
• AHCI related question
  • From: Kamala Narasimhan
• sata_sil24: external raid storage mistaken as port multiplier
  • From: Tobias Karnat
• [PATCH] ide: fix use after free in ide-acpi
  • From: Mariusz Kozlowski
• Re: [PATCH] IDE: ide-floppy, remove unnecessary NULL check
  • From: David Miller
• Re: [PATCH 02/11] drivers/ide/pmac.c: Remove unnecessary casts of pci_get_drvdata
  • From: David Miller
• Re: [PATCH] ide: fix use after free in ide-acpi
  • From: David Miller
• Re: Kernel problem or faulty drive?
  • From: Alan Cox
• Re: Kernel problem or faulty drive?
  • From: gene heskett
• Kernel problem or faulty drive?
  • From: Jonathan Woithe
• Re: Why so much PIO for r/w accesses ?
  • From: Sergei Shtylyov
• ata: hotplug not working with arasan CF controller driver
  • From: Viresh Kumar
• Re: Why so much PIO for r/w accesses ?
  • From: Mark Lord
• Why so much PIO for r/w accesses ?
  • From: Mark Lord
• Re: ide boot failure 2.6.36/2.6.28 - 2.6.27 works
  • From: Andries E. Brouwer
• Re: ide boot failure 2.6.36/2.6.28 - 2.6.27 works
  • From: Alan Cox
• Re: ide boot failure 2.6.36/2.6.28 - 2.6.27 works
  • From: Andries E. Brouwer
• Re: ide boot failure 2.6.36/2.6.28 - 2.6.27 works
  • From: Borislav Petkov
• Re: ide boot failure 2.6.36/2.6.28 - 2.6.27 works
  • From: Andries E. Brouwer
• Re: ide boot failure 2.6.36/2.6.28 - 2.6.27 works
  • From: Justin P. Mattock
• ide boot failure 2.6.36/2.6.28 - 2.6.27 works
  • From: Andries E. Brouwer
• [git patch] libata fix
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] sata_via: apply magic FIFO fix to vt6420 too
  • From: Peter Zijlstra
• [PATCH #upstream-fixes] sata_via: apply magic FIFO fix to vt6420 too
  • From: Tejun Heo
• Re: [dm-devel] [RFC] training mpath to discern between SCSI errors
  • From: Malahal Naineni
• [git patch] libata SCSI locking update
  • From: Jeff Garzik
• Re: [PATCH] Export ahci eSATA attribute
  • From: Phillip Susi
• Re: [PATCH] libata: 'done' related SCSI cleanups
  • From: Tejun Heo
• [PATCH] libata: 'done' related SCSI cleanups
  • From: Jeff Garzik
• Re: [PATCH v2] libata: remove scsi host lock and serial number usage
  • From: Nicholas A. Bellinger
• Re: [PATCH v2] libata: remove scsi host lock and serial number usage
  • From: Linus Torvalds
• [PATCH v2] libata: remove scsi host lock and serial number usage
  • From: Jeff Garzik
• Re: [PATCH] libata: remove unlock+relock cycle in ata_scsi_queuecmd
  • From: James Bottomley
• Re: [PATCH] libata: remove unlock+relock cycle in ata_scsi_queuecmd
  • From: Christoph Hellwig
• Re: [PATCH] libata: remove unlock+relock cycle in ata_scsi_queuecmd
  • From: James Bottomley
• Re: [PATCH] libata: remove unlock+relock cycle in ata_scsi_queuecmd
  • From: Jeff Garzik
• Re: [PATCH] libata: remove unlock+relock cycle in ata_scsi_queuecmd
  • From: Tejun Heo
• Re: [PATCH] libata: remove unlock+relock cycle in ata_scsi_queuecmd
  • From: Jeff Garzik
• Re: [PATCH] libata: remove unlock+relock cycle in ata_scsi_queuecmd
  • From: Jeff Garzik
• Re: [PATCH] libata: remove unlock+relock cycle in ata_scsi_queuecmd
  • From: Linus Torvalds
• [PATCH] libata: remove unlock+relock cycle in ata_scsi_queuecmd
  • From: Jeff Garzik
• RE: AMD 890GX vs 6Gbps SATA?
  • From: Huang, Shane
• Re: AMD 890GX vs 6Gbps SATA?
  • From: Stan Hoeppner
• Re: AMD 890GX vs 6Gbps SATA?
  • From: Stan Hoeppner
• Re: AMD 890GX vs 6Gbps SATA?
  • From: Mark Lord
• RE: AMD 890GX vs 6Gbps SATA?
  • From: Huang, Shane
• [PATCH 00/11] Remove unnecessary casts of pci_get_drvdata
  • From: Joe Perches
• [PATCH 02/11] drivers/ide/pmac.c: Remove unnecessary casts of pci_get_drvdata
  • From: Joe Perches
• Re: AMD 890GX vs 6Gbps SATA?
  • From: James Cloos
• Re: AMD 890GX vs 6Gbps SATA?
  • From: Stan Hoeppner
• Re: AMD 890GX vs 6Gbps SATA?
  • From: James Cloos
• RE: AMD 890GX vs 6Gbps SATA?
  • From: Huang, Shane
• Re: AMD 890GX vs 6Gbps SATA?
  • From: James Cloos
• Re: AMD 890GX vs 6Gbps SATA?
  • From: James Cloos
• Re: Bug#598518: linux-image-2.6-686: ata_piix module loaded before ahci module deactivate hotplug support (regression from lenny)
  • From: Thomas DEBESSE
• Re: [PATCH] sata-via: enable magic transmission fix for vt6420
  • From: Tejun Heo
• RE: AMD 890GX vs 6Gbps SATA?
  • From: Huang, Shane
• Re: AMD 890GX vs 6Gbps SATA?
  • From: Jeff Garzik
• [Bug 14708] Option remap63 for OnTrack diskmanager not work - kernel panic, unable to mount root filesystem
  • From: bugzilla-daemon
• AMD 890GX vs 6Gbps SATA?
  • From: James Cloos
• Re: [PATCH] Export ahci eSATA attribute
  • From: Phillip Susi
• Re: [PATCH] Export ahci eSATA attribute
  • From: Jeff Garzik
• Re: [PATCH] Export ahci eSATA attribute
  • From: Phillip Susi
• Re: ata device numbers
  • From: Paul Klapperich
• [git patches] libata fixes
  • From: Jeff Garzik
• [PATCH #upstream] acard_ahci: support for ATP8620 host controller
  • From: David Milburn
• Re: [PATCH] Export ahci eSATA attribute
  • From: Phillip Susi
• [PATCH #upstream-fixes] pata_legacy: fix CONFIG_PATA_WINBOND_VLB_MODULE test
  • From: Tejun Heo
• [PATCH] [SCSI] megaraid_sas: Sanity check user supplied length before passing it to dma_alloc_coherent()
  • From: Bjørn Mork
• Re: kernel problems with smart on LSI-92xx
  • From: Bokhan Artem
• Re: kernel problems with smart on LSI-92xx
  • From: Bjørn Mork
• Re: [PATCH] Export ahci eSATA attribute
  • From: Jeff Garzik
• [PATCH] Export ahci eSATA attribute
  • From: Phillip Susi
• kernel problems with smart on LSI-92xx
  • From: Bokhan Artem
• Re: [RFC PATCH] SCSI host lock push-down
  • From: Nicholas A. Bellinger
• Re: [RFC PATCH] SCSI host lock push-down
  • From: Jeff Garzik
• Re: [RFC PATCH] SCSI host lock push-down
  • From: Jeff Garzik
• Re: [RFC PATCH] SCSI host lock push-down
  • From: Andi Kleen
• Re: [RFC PATCH] SCSI host lock push-down
  • From: Boaz Harrosh
• Re: [PATCH] IDE: ide-floppy, remove unnecessary NULL check
  • From: Borislav Petkov
• Re: [PATCH] IDE: ide-floppy, remove unnecessary NULL check
  • From: Sergei Shtylyov
• Re: [RFC PATCH] SCSI host lock push-down
  • From: Stefan Richter
• [PATCH] IDE: ide-floppy, remove unnecessary NULL check
  • From: Jiri Slaby
• Re: TRIM support in drivers and dm/md?
  • From: Jeff Garzik
• Re: TRIM support in drivers and dm/md?
  • From: Mark Lord
• [RFC PATCH] SCSI host lock push-down
  • From: Jeff Garzik
• Re: TRIM support in drivers and dm/md?
  • From: Jeff Garzik
• Re: Where should i add Compact flash driver?
  • From: Dominik Brodowski
• Re: Hyper-V and IDE disks > 128GB
  • From: Tim Small
• Re: [PATCH #upstream-fixes] libata: fix NULL sdev dereference race in atapi_qc_complete()
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] libata: fix NULL sdev dereference race in atapi_qc_complete()
  • From: Mark Lord
• Re: Where should i add Compact flash driver?
  • From: Sergei Shtylyov
• Re: Hyper-V and IDE disks > 128GB
  • From: Alan Cox
• Hyper-V and IDE disks > 128GB
  • From: David Shaw
• Re: Full hostlock pushdown available
  • From: Jeff Garzik
• Re: Full hostlock pushdown available
  • From: Nicholas A. Bellinger
• Re: Full hostlock pushdown available
  • From: Jeff Garzik
• Re: Full hostlock pushdown available
  • From: Andi Kleen
• Re: Full hostlock pushdown available
  • From: Jeff Garzik
• Re: Full hostlock pushdown available
  • From: Andi Kleen
• Where should i add Compact flash driver?
  • From: viresh kumar
• Re: Full hostlock pushdown available
  • From: Nicholas A. Bellinger
• Re: Full hostlock pushdown available
  • From: Jeff Garzik
• [PATCH #upstream-fixes] libata: fix NULL sdev dereference race in atapi_qc_complete()
  • From: Tejun Heo
• Re: Possible regression when going from 2.6.26 to 2.6.32
  • From: Wolfgang Karall
• Re: Possible regression when going from 2.6.26 to 2.6.32
  • From: Mark Lord
• [lists+linux-ide@xxxxxxxxxxxxx: Possible regression when going from 2.6.26 to 2.6.32]
  • From: Wolfgang Karall
• Possible regression when going from 2.6.26 to 2.6.32
  • From: Wolfgang Karall
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Jeff Garzik
• apparently missing test of CONFIG_PATA_WINBOND_VLB in drivers/ata
  • From: Robert P. J. Day
• [GIT] IDE
  • From: David Miller
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Siddhartha Jain
• Re: 2.6.36: Dropped interrupts in ata_piix
  • From: Mike Waychison
• Re: 2.6.36: Dropped interrupts in ata_piix
  • From: Mike Waychison
• ide-2.6 rebased...
  • From: David Miller
• [PATCH 14/14] drivers/ata/pata_octeon_cf.c: delete double assignment
  • From: Julia Lawall
• Re: 2.6.36: Dropped interrupts in ata_piix
  • From: Tejun Heo
• Re: [PATCH 0/9] Typo fixes of faild to failed
  • From: Mike Frysinger
• [PATCH 1/9] drivers/ata: typo fix of faild to failed
  • From: Joe Perches
• [PATCH 0/9] Typo fixes of faild to failed
  • From: Joe Perches
• [git patches] libata updates for 2.6.37
  • From: Jeff Garzik
• Re: [PATCH] pata_bf54x: fix return type of bfin_set_devctl
  • From: Sergei Shtylyov
• [PATCH 07/22] pcmcia: move config_{base,index,regs} to struct pcmcia_device
  • From: Dominik Brodowski
• [PATCH 10/22] pcmcia: introduce autoconfiguration feature
  • From: Dominik Brodowski
• [PATCH 11/22] pcmcia: use autoconfiguration feature for ioports and iomem
  • From: Dominik Brodowski
• [PATCH 06/22] pcmcia: simplify IntType
  • From: Dominik Brodowski
• [PATCH 03/22] pcmcia: move Vpp setup to struct pcmcia_device
  • From: Dominik Brodowski
• [PATCH 08/22] pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device
  • From: Dominik Brodowski
• [PATCH] pata_bf54x: fix return type of bfin_set_devctl
  • From: Mike Frysinger
• Re: Bug#598518: linux-image-2.6-686: ata_piix module loaded before ahci module deactivate hotplug support (regression from lenny)
  • From: Thomas DEBESSE
• Re: [RFC] training mpath to discern between SCSI errors
  • From: Jun'ichi Nomura
• Re: Sil 3124: "softreset failed (SRST command error)"
  • From: Anssi Hannula
• Re: [RFC] training mpath to discern between SCSI errors
  • From: Hannes Reinecke
• Re: [RFC] training mpath to discern between SCSI errors
  • From: Jun'ichi Nomura
• Re: [PATCH] Drivers: ata: Makefile: replace the use of <module>-objs with <module>-y
  • From: Tracey Dent
• Re: [PATCH] Drivers: ata: Makefile: replace the use of <module>-objs with <module>-y
  • From: Mark Lord
• [PATCH] Drivers: ata: Makefile: replace the use of <module>-objs with <module>-y
  • From: Tracey Dent
• Re: [PATCH #upstream-fixes] libahci: fix result_tf handling after an ATA PIO data-in command
  • From: Mark Lord
• [PATCH UPDATED #upstream-fixes] libahci: fix result_tf handling after an ATA PIO data-in command
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] libahci: fix result_tf handling after an ATA PIO data-in command
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] libahci: fix result_tf handling after an ATA PIO data-in command
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] libahci: fix result_tf handling after an ATA PIO data-in command
  • From: Robert Hancock
• Re: [PATCH #upstream-fixes] libahci: fix result_tf handling after an ATA PIO data-in command
  • From: Robert Hancock
• Re: [PATCH #upstream-fixes] libahci: fix result_tf handling after an ATA PIO data-in command
  • From: Mark Lord
• Re: [RESEND PATCH] ata: Intel IDE-R support
  • From: Jeff Garzik
• [RESEND PATCH] ata: Intel IDE-R support
  • From: Alan Cox
• Re: Sil 3124: "softreset failed (SRST command error)"
  • From: Jeremy Sanders
• result_tf handling in sata_fsl and sas_ata
  • From: Tejun Heo
• [PATCH #upstream-fixes] libahci: fix result_tf handling after an ATA PIO data-in command
  • From: Tejun Heo
• Re: [PATCH 12/14] ata: pata_octeon_cf: Use I/O clock rate for timing calculations.
  • From: Jeff Garzik
• Re: Sil 3124: "softreset failed (SRST command error)"
  • From: Jeremy Sanders
• Re: Sil 3124: "softreset failed (SRST command error)"
  • From: Tim Small
• Re: Sil 3124: "softreset failed (SRST command error)"
  • From: Jeremy Sanders
• Re: Sil 3124: "softreset failed (SRST command error)"
  • From: Tejun Heo
• Re: Sil 3124: "softreset failed (SRST command error)"
  • From: Jeremy Sanders
• Sil 3124: "softreset failed (SRST command error)"
  • From: Jeremy Sanders
• Re: [PATCH 12/14] ata: pata_octeon_cf: Use I/O clock rate for timing calculations.
  • From: Ralf Baechle
• [PATCH] ata_piix: Add device ID for ICH4-L
  • From: Ben Hutchings
• Re: ata device numbers
  • From: Harri Olin
• Re: ata device numbers
  • From: Alan Cox
• ata device numbers
  • From: Harri Olin
• Re: [PATCH 3/4] pata_sil680: implement sff_irq_check() method
  • From: Sergei Shtylyov
• Re: [PATCH 2/4] pata_pdc202xx_old: implement sff_irq_check() method
  • From: Sergei Shtylyov
• Re: [PATCH 1/4] pata_cmd640: implement sff_irq_check() method
  • From: Sergei Shtylyov
• Re: [PATCH 3/4] pata_sil680: implement sff_irq_check() method
  • From: Alan Cox
• Re: [PATCH 2/4] pata_pdc202xx_old: implement sff_irq_check() method
  • From: Alan Cox
• Re: [PATCH 1/4] pata_cmd640: implement sff_irq_check() method
  • From: Alan Cox
• [PATCH 4/4] pata_sl82c105: implement sff_irq_check() method
  • From: Sergei Shtylyov
• [PATCH 3/4] pata_sil680: implement sff_irq_check() method
  • From: Sergei Shtylyov
• [PATCH 2/4] pata_pdc202xx_old: implement sff_irq_check() method
  • From: Sergei Shtylyov
• [PATCH 1/4] pata_cmd640: implement sff_irq_check() method
  • From: Sergei Shtylyov
• [PATCH 00/14] Add initial support for Octeon CN63XX
  • From: David Daney
• [PATCH 12/14] ata: pata_octeon_cf: Use I/O clock rate for timing calculations.
  • From: David Daney
• Re: Bug#598518: linux-image-2.6-686: ata_piix module loaded before ahci module deactivate hotplug support (regression from lenny)
  • From: Ben Hutchings
• Re: Bug#598518: linux-image-2.6-686: ata_piix module loaded before ahci module deactivate hotplug support (regression from lenny)
  • From: Thomas DEBESSE
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Robert Hancock
• [PATCH] pata_sil680: make sil680_sff_exec_command() 'static'
  • From: Sergei Shtylyov
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Tejun Heo
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Mark Lord
• Re: Bug#598518: linux-image-2.6-686: ata_piix module loaded before ahci module deactivate hotplug support (regression from lenny)
  • From: maximilian attems
• Re: Bug#598518: linux-image-2.6-686: ata_piix module loaded before ahci module deactivate hotplug support (regression from lenny)
  • From: Thomas DEBESSE
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Tejun Heo
• mips/ide: flush dcache also if icache does not snoop dcache
  • From: Sebastian Andrzej Siewior
• Re: piix vs ata_piix device ID tables
  • From: Ben Hutchings
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Mark Lord
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Jeff Garzik
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Mark Lord
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Jeff Garzik
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Mark Lord
• Re: Bug#598518: linux-image-2.6-686: ata_piix module loaded before ahci module deactivate hotplug support (regression from lenny)
  • From: maximilian attems
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Mark Lord
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Mark Lord
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Mark Lord
• Re: Bug#598518: linux-image-2.6-686: ata_piix module loaded before ahci module deactivate hotplug support (regression from lenny)
  • From: Tejun Heo
• Re: piix vs ata_piix device ID tables
  • From: Alan Cox
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Tejun Heo
• piix vs ata_piix device ID tables
  • From: Ben Hutchings
• Re: Marvel PMP SATA controller
  • From: Mark Lord
• Re: Marvel PMP SATA controller
  • From: Richard
• Re: Marvel PMP SATA controller
  • From: Robert Hancock
• Re: Marvel PMP SATA controller
  • From: Richard
• Re: Marvel PMP SATA controller
  • From: Mark Lord
• Re: Bug#598518: linux-image-2.6-686: ata_piix module loaded before ahci module deactivate hotplug support (regression from lenny)
  • From: Ben Hutchings
• Re: Marvel PMP SATA controller
  • From: Richard
• Re: Marvel PMP SATA controller
  • From: Mark Lord
• Marvel PMP SATA controller
  • From: Richard
• [git patch] libata fix
  • From: Jeff Garzik
• Re: [RESEND PATCH] ata: Intel IDE-R support
  • From: Jeff Garzik
• Re: [RFC v5]update broken web addresses in the kernel.
  • From: Justin P. Mattock
• [RESEND PATCH] ata: Intel IDE-R support
  • From: Alan Cox
• Re: [RFC v5]update broken web addresses in the kernel.
  • From: Finn Thain
• Re: [RFC v5]update broken web addresses in the kernel.
  • From: Justin P. Mattock
• Re: [RFC v5]update broken web addresses in the kernel.
  • From: Finn Thain
• Re: [RFC v4]update broken web addresses in the kernel.
  • From: Justin P. Mattock
• [RFC v5]update broken web addresses in the kernel.
  • From: Justin P. Mattock
• Re: [RFC v4]update broken web addresses in the kernel.
  • From: Finn Thain
• Re: [RFC v4]update broken web addresses in the kernel.
  • From: Justin P. Mattock
• Re: [RFC v4]update broken web addresses in the kernel.
  • From: Finn Thain
• Re: [RFC v4]update broken web addresses in the kernel.
  • From: Justin P. Mattock
• Re: [RFC v4]update broken web addresses in the kernel.
  • From: Finn Thain
• Re: [PATCH 2/2] hpt366: fix clock turnaround
  • From: David Miller
• Re: [PATCH 1/2] hpt366: add debounce delay to cable_detect() method
  • From: David Miller
• Re: [RFC v4]update broken web addresses in the kernel.
  • From: Justin P. Mattock
• Re: [RFC v4]update broken web addresses in the kernel.
  • From: Justin P. Mattock
• Re: [RFC v4]update broken web addresses in the kernel.
  • From: Joe Perches
• Re: [RFC v4]update broken web addresses in the kernel.
  • From: John W. Linville
• Re: hibernation hangs with ATA errors (lockup_detector bug)
  • From: Don Zickus
• [PATCH 2/2] hpt366: fix clock turnaround
  • From: Sergei Shtylyov
• [PATCH 1/2] hpt366: add debounce delay to cable_detect() method
  • From: Sergei Shtylyov
• [RFC v4]update broken web addresses in the kernel.
  • From: Justin P. Mattock
• Re: [RFC 1/3 v3]update web addresses in the kernel
  • From: Justin P. Mattock
• Re: [RFC 1/3 v3]update web addresses in the kernel
  • From: Finn Thain
• Re: [RFC 2/3 v3]update web addresses in stagging
  • From: Matthew Dharm
• Re: [PATCH] hpt366: fix clock turnaround
  • From: David Miller
• Re: [RFC 2/3 v3]update web addresses in stagging
  • From: Justin P. Mattock
• Re: hibernation hangs with ATA errors (lockup_detector bug)
  • From: Jiri Slaby
• Re: [PATCH] hpt366: add debounce delay to cable_detect() method
  • From: Sergei Shtylyov
• Re: [PATCH] hpt366: fix clock turnaround
  • From: Sergei Shtylyov
• Re: [PATCH] fix blk-exec.c compile error: always define 'sysctl_hung_task_timeout_secs' (resend)
  • From: Jens Axboe
• Re: [RFC 2/3 v3]update web addresses in stagging
  • From: Justin P. Mattock
• Re: [RFC 2/3 v3]update web addresses in stagging
  • From: Greg KH
• [RFC 3/3 v3]update broken web addresses archive dot org
  • From: Justin P. Mattock
• [RFC 2/3 v3]update web addresses in stagging
  • From: Justin P. Mattock
• [RFC 1/3 v3]update web addresses in the kernel
  • From: Justin P. Mattock
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Robert Hancock
• [PATCH] fix blk-exec.c compile error: always define 'sysctl_hung_task_timeout_secs' (resend)
  • From: Mark Lord
• Re: [RFT PATCH] amiga, atari floppy: Use one request queue per disk
  • From: Mark Lord
• Re: [PATCH 06/24] ide: change to new flag variable
  • From: David Miller
• [PATCH 06/24] ide: change to new flag variable
  • From: matt mooney
• Re: hibernation hangs with ATA errors (lockup_detector bug)
  • From: Don Zickus
• Re: hibernation hangs with ATA errors (lockup_detector bug)
  • From: Don Zickus
• Re: hibernation hangs with ATA errors (lockup_detector bug)
  • From: Jiri Slaby
• Re: [PATCH] block: Prevent hang_check firing during long I/O
  • From: Jens Axboe
• [PATCH] block: Prevent hang_check firing during long I/O
  • From: Mark Lord
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Mark Lord
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Mark Lord
• Re: "blocked for more than 120 secs" --> a valid situation, how to prevent?
  • From: Jens Axboe
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Seed
• hdparm-9.32 released: recommended upgrade
  • From: Mark Lord
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Mark Lord
• Re: "blocked for more than 120 secs" --> a valid situation, how to prevent?
  • From: Stan Hoeppner
• Re: [BUG] libahci returns stale result tf much of the time.
  • From: Seed
• [BUG] libahci returns stale result tf much of the time.
  • From: Mark Lord
• Re: "blocked for more than 120 secs" --> a valid situation, how to prevent?
  • From: Mark Lord
• Re: "blocked for more than 120 secs" --> a valid situation, how to prevent?
  • From: Douglas Gilbert
• Re: "blocked for more than 120 secs" --> a valid situation, how to prevent?
  • From: Douglas Gilbert
• Re: "blocked for more than 120 secs" --> a valid situation, how to prevent?
  • From: Mark Lord
• Re: "blocked for more than 120 secs" --> a valid situation, how to prevent?
  • From: Stan Hoeppner
• Re: "blocked for more than 120 secs" --> a valid situation, how to prevent?
  • From: Mark Lord
• Re: "blocked for more than 120 secs" --> a valid situation, how to prevent?
  • From: Kyle McMartin
• Re: "blocked for more than 120 secs" --> a valid situation, how to prevent?
  • From: Maxim Levitsky
• Re: "blocked for more than 120 secs" --> a valid situation, how to prevent?
  • From: Kyle McMartin
• Re: "blocked for more than 120 secs" --> a valid situation, how to prevent?
  • From: Stan Hoeppner
• Re: "blocked for more than 120 secs" --> a valid situation, how to prevent?
  • From: Douglas Gilbert
• "blocked for more than 120 secs" --> a valid situation, how to prevent?
  • From: Mark Lord
• Re: pata_it821x driver reports many FLUSH CACHE command failures
  • From: Alan Cox
• pata_it821x driver reports many FLUSH CACHE command failures
  • From: Chuck Ebbert
• Re: ahci rmmodable and shouldn't
  • From: Pedro Francisco
• Re: PDC42819 porr performance: how to debug?
  • From: Mikael Pettersson
• PDC42819 porr performance: how to debug?
  • From: George Spelvin
• Re: [PATCH #upstream-fixes] ahci: fix module refcount breakage introduced by libahci split
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] ahci: fix module refcount breakage introduced by libahci split
  • From: Michael Tokarev
• [PATCH #upstream-fixes] ahci: fix module refcount breakage introduced by libahci split
  • From: Tejun Heo
• Re: ahci rmmodable and shouldn't
  • From: Michael Tokarev
• Re: ahci rmmodable and shouldn't
  • From: Tejun Heo
• Re: ahci rmmodable and shouldn't
  • From: Tejun Heo
• Re: ahci rmmodable and shouldn't
  • From: Pedro Francisco
• RE: PATA IDE is slower in newer versions of kernel
  • From: Joshua Hintze
• Re: ahci rmmodable and shouldn't
  • From: Tejun Heo
• Re: ahci rmmodable and shouldn't
  • From: Tejun Heo
• Re: ahci rmmodable and shouldn't
  • From: Pedro Francisco
• Re: ahci rmmodable and shouldn't
  • From: Tejun Heo
• Re: ahci rmmodable and shouldn't
  • From: Pedro Francisco
• RE: PATA IDE is slower in newer versions of kernel
  • From: Joshua Hintze
• Re: PATA IDE is slower in newer versions of kernel
  • From: Alan Cox
• Re: [dm-devel] [PATCH 23/41] dm: implement REQ_FLUSH/FUA support for bio-based dm
  • From: Mike Snitzer
• Re: PATA IDE is slower in newer versions of kernel
  • From: Arnd Bergmann
• RE: PATA IDE is slower in newer versions of kernel
  • From: Joshua Hintze
• Re: PATA IDE is slower in newer versions of kernel
  • From: Randy Dunlap
• RE: PATA IDE is slower in newer versions of kernel
  • From: Joshua Hintze
• RE: PATA IDE is slower in newer versions of kernel
  • From: Maxim Levitsky
• RE: PATA IDE is slower in newer versions of kernel
  • From: Joshua Hintze
• Re: [GIT] IDE
  • From: Wolfram Sang
• Re: Either PMP issues, or SB700/800 Issues ??
  • From: Greg Oliver
• Re: Either PMP issues, or SB700/800 Issues ??
  • From: Tejun Heo
• [GIT] IDE
  • From: David Miller
• Re: libata: SATL error processing: unrecovered read error
  • From: Jeff Garzik
• Re: libata: SATL error processing: unrecovered read error
  • From: Douglas Gilbert
• Re: libata: SATL error processing: unrecovered read error
  • From: Jeff Garzik
• Re: On SoC SATA controller driver implementation!!!
  • From: Jeff Garzik
• Either PMP issues, or SB700/800 Issues ??
  • From: Greg Oliver
• Re: PATA IDE is slower in newer versions of kernel
  • From: Alejandro Riveira Fernández
• On SoC SATA controller driver implementation!!!
  • From: Murali N
• Re: ahci rmmodable and shouldn't
  • From: Tejun Heo
• Re: [PATCH] libata: Signal that our SATL supports WRITE SAME(16) with UNMAP
  • From: Jeff Garzik
• Re: [PATCH] libata: reorder ata_queued_cmd to remove alignment padding on 64 bit builds
  • From: Jeff Garzik
• Re: [PATCH #upstream 1/3] libata: add @ap to ata_wait_register() and introduce ata_msleep()
  • From: Jeff Garzik
• Re: [PATCHSET #upstream] libata: reimplement LPM support
  • From: Jeff Garzik
• Re: ahci rmmodable and shouldn't
  • From: Randy Dunlap
• PATA IDE is slower in newer versions of kernel
  • From: Joshua Hintze
• [PATCHv2] acpi: Add support for linking docks to the objects they contain
  • From: Matthew Garrett
• Re: [PATCH 4/5] acpi: Add support for linking docks to the objects they contain
  • From: Randy Dunlap
• [PATCH 5/5] libata: Add links between removable devices and docks
  • From: Matthew Garrett
• [PATCH 3/5] libata: Migrate ACPI code over to new bindings
  • From: Matthew Garrett
• [PATCH 4/5] acpi: Add support for linking docks to the objects they contain
  • From: Matthew Garrett
• [PATCH 1/5] scsi: Export scsi_bus_type
  • From: Matthew Garrett
• [PATCH 2/5] libata: Bind the Linux device tree to the ACPI device tree
  • From: Matthew Garrett
• Re: WARNINGs because of ide-proc handling
  • From: David Miller
• Re: [PATCH 23/41] dm: implement REQ_FLUSH/FUA support for bio-based dm
  • From: Mikulas Patocka
• Re: Combined storage tree
  • From: James Bottomley
• SIRI/STRD support
  • From: Pascal GREGIS
• Re: Combined storage tree
  • From: Dave Chinner
• [PATCH] ata: sata_dwc_460ex: fix error path
  • From: Vasiliy Kulikov
• Re: [PATCH] libata: reorder ata_queued_cmd to remove alignment padding on 64 bit builds
  • From: Richard Kennedy
• Re: Problems with SIL3132 and PMP / Is this driver/kernel related?
  • From: Tejun Heo
• Re: using sata_sil24 10.4 2.6.32-25-server x86_64
  • From: Tejun Heo
• Re: How to determine the information about SATA controller
  • From: Jaswinder Singh Rajput
• Re: Combined storage tree
  • From: James Bottomley
• Re: How to determine the information about SATA controller
  • From: Mikael Pettersson
• Re: How to determine the information about SATA controller
  • From: Jaswinder Singh Rajput
• Re: [PATCH 23/41] dm: implement REQ_FLUSH/FUA support for bio-based dm
  • From: Ric Wheeler
• Re: How to determine the information about SATA controller
  • From: Mikael Pettersson
• How to determine the information about SATA controller
  • From: Jaswinder Singh Rajput
• Re: Combined storage tree
  • From: Dave Chinner
• Re: [PATCH 23/41] dm: implement REQ_FLUSH/FUA support for bio-based dm
  • From: Mike Snitzer
• Re: [PATCH 23/41] dm: implement REQ_FLUSH/FUA support for bio-based dm
  • From: Tejun Heo
• Re: [PATCH 23/41] dm: implement REQ_FLUSH/FUA support for bio-based dm
  • From: Mikulas Patocka
• Re: [PATCH 23/41] dm: implement REQ_FLUSH/FUA support for bio-based dm
  • From: Mike Snitzer
• Re: [PATCH 23/41] dm: implement REQ_FLUSH/FUA support for bio-based dm
  • From: Mikulas Patocka
• Re: [PATCH 23/41] dm: implement REQ_FLUSH/FUA support for bio-based dm
  • From: Mike Snitzer
• Combined storage tree
  • From: James Bottomley
• Re: [PATCH 23/41] dm: implement REQ_FLUSH/FUA support for bio-based dm
  • From: Mikulas Patocka
• Re: using sata_sil24 10.4 2.6.32-25-server x86_64
  • From: Tejun Heo
• using sata_sil24 10.4 2.6.32-25-server x86_64
  • From: Hugo Antunes
• Re: sata_sil boot problems with kernel 2.6.35 and current git
  • From: Tejun Heo
• Re: sata_sil boot problems with kernel 2.6.35 and current git
  • From: Hugo Antunes
• [PATCH] libata: reorder ata_queued_cmd to remove alignment padding on 64 bit builds
  • From: Richard Kennedy
• Re: sata_sil boot problems with kernel 2.6.35 and current git
  • From: Jan Beulich
• [PATCH] libata: Signal that our SATL supports WRITE SAME(16) with UNMAP
  • From: Martin K. Petersen
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Jan Kara
• Re: sata_sil boot problems with kernel 2.6.35 and current git
  • From: gianluca
• [PATCH 2.6.35.4] ahci: AHCI and RAID mode SATA patch for Intel Patsburg DeviceIDs
  • From: Seth Heasley
• [PATCH 2.6.35.4] ata_piix: IDE Mode SATA patch for Intel Patsburg DeviceIDs
  • From: Seth Heasley
• [Bug 17982] Cannot see devices on IDE controller
  • From: bugzilla-daemon
• [PATCH #upstream-fixes] libata,pata_via: revert ata_wait_idle() removal from ata_sff/via_tf_load()
  • From: Tejun Heo
• Re: sata_sil boot problems with kernel 2.6.35 and current git
  • From: Tejun Heo
• Re: Maybe a bug in libata-core
  • From: Stefan /*St0fF*/ Hübner
• sata_sil boot problems with kernel 2.6.35 and current git
  • From: gianluca
• Re: [PATCHSET #upstream] block, fs: replace HARDBARRIER with FLUSH/FUA, take#2
  • From: Tejun Heo
• Re: [PATCH 42/41 v2] dm: convey that all flushes are processed as empty
  • From: Tejun Heo
• Re: [PATCH 42/41 v2] dm: convey that all flushes are processed as empty
  • From: Tejun Heo
• Hard drive with crazy unloading
  • From: Dimitris Fotopoulos
• [PATCH 42/41 v2] dm: convey that all flushes are processed as empty
  • From: Mike Snitzer
• Re: [PATCH 24/41] dm: implement REQ_FLUSH/FUA support for request-based dm
  • From: Kiyoshi Ueda
• Re: [PATCH 42/41] dm: convey that all flushes are processed as empty
  • From: Christoph Hellwig
• [PATCH 42/41] dm: convey that all flushes are processed as empty
  • From: Mike Snitzer
• Re: [PATCH 23/41] dm: implement REQ_FLUSH/FUA support for bio-based dm
  • From: Mike Snitzer
• Re: [PATCH 23/41] dm: implement REQ_FLUSH/FUA support for bio-based dm
  • From: Mike Snitzer
• Synchronizing the resume/suspend/remove routine with Driver's IO path
  • From: Lalatendu Das
• State of outstanding command executing driver code during suspend()/resume().
  • From: ld puri
• [PATCH #upstream-fixes] libata: skip EH autopsy and recovery during suspend
  • From: Tejun Heo
• Re: [PATCH] libata: skip EH autopsy and recovery during suspend
  • From: Stephan Diestelhorst
• Re: [PATCH] via82cxxx: fix typo for VT6415 PCIE PATA IDE Host Controller support.
  • From: David Miller
• [Bug 17982] Cannot see devices on IDE controller
  • From: bugzilla-daemon
• [Bug 17982] Cannot see devices on IDE controller
  • From: bugzilla-daemon
• [Bug 17982] Cannot see devices on IDE controller
  • From: bugzilla-daemon
• [Bug 17982] New: Cannot see devices on IDE controller
  • From: bugzilla-daemon
• Re: libata acpi issue on gateway laptop
  • From: Kyle McMartin
• Re: libata acpi issue on gateway laptop
  • From: Tejun Heo
• [PATCH #upstream 3/3] ata_piix: remove SIDPR locking
  • From: Tejun Heo
• [PATCH #upstream 2/3] libata: implement cross-port EH exclusion
  • From: Tejun Heo
• [PATCH #upstream 1/3] libata: add @ap to ata_wait_register() and introduce ata_msleep()
  • From: Tejun Heo
• Re: [PATCH 24.5/30] jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
  • From: Jan Kara
• Re: [PATCH 24.5/30] jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
  • From: Andreas Dilger
• Re: [dm-devel] [PATCH 23/41] dm: implement REQ_FLUSH/FUA support for bio-based dm
  • From: Milan Broz
• Re: [PATCH #upstream-fixes] ahci: fix hang on failed softreset
  • From: Jeff Garzik
• libata: SATL error processing: unrecovered read error
  • From: Douglas Gilbert
• Re: [PATCH 10/15] pcmcia: introduce autoconfiguration feature
  • From: Gustavo F. Padovan
• Re: [PATCH 06/15] pcmcia: simplify IntType
  • From: Gustavo F. Padovan
• Re: [PATCH 08/15] pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device
  • From: Gustavo F. Padovan
• Re: [PATCH 03/15] pcmcia: move Vpp setup to struct pcmcia_device
  • From: Gustavo F. Padovan
• Re: [PATCH 07/15] pcmcia: move config_{base,index,regs} to struct pcmcia_device
  • From: Gustavo F. Padovan
• Re: WARNINGs because of ide-proc handling
  • From: Wolfram Sang
• Re: WARNINGs because of ide-proc handling
  • From: Wolfram Sang
• Re: WARNINGs because of ide-proc handling
  • From: David Miller
• Re: WARNINGs because of ide-proc handling
  • From: Bartlomiej Zolnierkiewicz
• Re: [linux-pm] [PATCH] libata: skip EH autopsy and recovery during suspend
  • From: Alan Stern
• Re: hibernation hangs with ATA errors (lockup_detector bug)
  • From: Don Zickus
• Re: [PATCH 23/41] dm: implement REQ_FLUSH/FUA support for bio-based dm
  • From: Mike Snitzer
• Re: WARNINGs because of ide-proc handling
  • From: David Miller
• [PATCH 07/15] pcmcia: move config_{base,index,regs} to struct pcmcia_device
  • From: Dominik Brodowski
• [PATCH 11/15] pcmcia: use autoconfiguration feature for ioports and iomem
  • From: Dominik Brodowski
• [PATCH 06/15] pcmcia: simplify IntType
  • From: Dominik Brodowski
• [PATCH 03/15] pcmcia: move Vpp setup to struct pcmcia_device
  • From: Dominik Brodowski
• [PATCH 08/15] pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device
  • From: Dominik Brodowski
• [PATCH 10/15] pcmcia: introduce autoconfiguration feature
  • From: Dominik Brodowski
• [PATCH 12/41] block: simplify queue_next_fseq
  • From: Tejun Heo
• [PATCHSET #upstream] block, fs: replace HARDBARRIER with FLUSH/FUA, take#2
  • From: Tejun Heo
• [PATCH 06/41] block: misc cleanups in barrier code
  • From: Tejun Heo
• [PATCH 13/41] block: initialize flush request with WRITE_FLUSH instead of REQ_FLUSH
  • From: Tejun Heo
• [PATCH 19/41] virtio_blk: drop REQ_HARDBARRIER support
  • From: Tejun Heo
• [PATCH 02/41] block/loop: queue ordered mode should be DRAIN_FLUSH
  • From: Tejun Heo
• [PATCH 14/41] block: kick queue after sequencing REQ_FLUSH/FUA
  • From: Tejun Heo
• [PATCH 22/41] block: make __blk_rq_prep_clone() copy most command flags
  • From: Tejun Heo
• [PATCH 11/41] block: filter flush bio's in __generic_make_request()
  • From: Tejun Heo
• [PATCH 16/41] block: update documentation for REQ_FLUSH / REQ_FUA
  • From: Tejun Heo
• [PATCH 18/41] block/loop: implement REQ_FLUSH/FUA support
  • From: Tejun Heo
• [PATCH 05/41] block: remove spurious uses of REQ_HARDBARRIER
  • From: Tejun Heo
• [PATCH 15/41] block: make sure FSEQ_DATA request has the same rq_disk as the original
  • From: Tejun Heo
• [PATCH 17/41] block: use REQ_FLUSH in blkdev_issue_flush()
  • From: Tejun Heo
• [PATCH 07/41] block: drop barrier ordering by queue draining
  • From: Tejun Heo
• [PATCH 03/41] block: kill QUEUE_ORDERED_BY_TAG
  • From: Tejun Heo
• [PATCH 27/41] block: pass gfp_mask and flags to sb_issue_discard
  • From: Tejun Heo
• [PATCH 09/41] block: rename barrier/ordered to flush
  • From: Tejun Heo
• [PATCH 31/41] reiserfs: replace barriers with explicit flush / FUA usage
  • From: Tejun Heo
• [PATCH 26/41] dm: fix locking context in queue_io()
  • From: Tejun Heo
• [PATCH 20/41] lguest: replace VIRTIO_F_BARRIER support with VIRTIO_F_FLUSH support
  • From: Tejun Heo
• [PATCH 30/41] gfs2: replace barriers with explicit flush / FUA usage
  • From: Tejun Heo
• [PATCH 37/41] fat: do not send discards as barriers
  • From: Tejun Heo
• [PATCH 36/41] ext4: do not send discards as barriers
  • From: Tejun Heo
• [PATCH 24/41] dm: implement REQ_FLUSH/FUA support for request-based dm
  • From: Tejun Heo
• [PATCH 39/41] block: remove the WRITE_BARRIER flag
  • From: Tejun Heo
• [PATCH 08/41] block: rename blk-barrier.c to blk-flush.c
  • From: Tejun Heo
• [PATCH 40/41] block: remove the BLKDEV_IFL_BARRIER flag
  • From: Tejun Heo
• [PATCH 28/41] xfs: replace barriers with explicit flush / FUA usage
  • From: Tejun Heo
• [PATCH 25/41] dm: relax ordering of bio-based flush implementation
  • From: Tejun Heo
• [PATCH 34/41] jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
  • From: Tejun Heo
• [PATCH 35/41] jbd2: replace barriers with explicit flush / FUA usage
  • From: Tejun Heo
• [PATCH 32/41] nilfs2: replace barriers with explicit flush / FUA usage
  • From: Tejun Heo
• [PATCH 41/41] block: remove the BH_Eopnotsupp flag
  • From: Tejun Heo
• [PATCH 21/41] md: implment REQ_FLUSH/FUA support
  • From: Tejun Heo
• [PATCH 33/41] jbd: replace barriers with explicit flush / FUA usage
  • From: Tejun Heo
• [PATCH 29/41] btrfs: replace barriers with explicit flush / FUA usage
  • From: Tejun Heo
• [PATCH 10/41] block: implement REQ_FLUSH/FUA based interface for FLUSH/FUA requests
  • From: Tejun Heo
• [PATCH 23/41] dm: implement REQ_FLUSH/FUA support for bio-based dm
  • From: Tejun Heo
• [PATCH 04/41] block: deprecate barrier and replace blk_queue_ordered() with blk_queue_flush()
  • From: Tejun Heo
• [PATCH 38/41] swap: do not send discards as barriers
  • From: Tejun Heo
• [PATCH 01/41] ide: remove unnecessary blk_queue_flushing() test in do_ide_request()
  • From: Tejun Heo
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Tejun Heo
• Re: [linux-pm] [PATCH] libata: skip EH autopsy and recovery during suspend
  • From: Tejun Heo
• Re: hibernation hangs with ATA errors (lockup_detector bug)
  • From: Jiri Slaby
• Re: WARNINGs because of ide-proc handling
  • From: Wolfram Sang
• Re: 3w-9xxx: scsi0: WARNING: (0x06:0x0037): Character ioctl (0x108) timed out, resetting card.
  • From: adam radford
• Re: 3w-9xxx: scsi0: WARNING: (0x06:0x0037): Character ioctl (0x108) timed out, resetting card.
  • From: Justin Piszcz
• Re: WARNINGs because of ide-proc handling
  • From: David Miller
• Re: WARNINGs because of ide-proc handling
  • From: Wolfram Sang
• Re: [linux-pm] [PATCH] libata: skip EH autopsy and recovery during suspend
  • From: Rafael J. Wysocki
• Re: [linux-pm] [PATCH] libata: skip EH autopsy and recovery during suspend
  • From: Alan Stern
• Re: [PATCH] libata: skip EH autopsy and recovery during suspend
  • From: Stephan Diestelhorst
• Re: [PATCH] libata: skip EH autopsy and recovery during suspend
  • From: Tejun Heo
• Re: [PATCH] libata: skip EH autopsy and recovery during suspend
  • From: Rafael J. Wysocki
• Re: [PATCH] libata: skip EH autopsy and recovery during suspend
  • From: Tejun Heo
• Re: [PATCH] libata: skip EH autopsy and recovery during suspend
  • From: Rafael J. Wysocki
• Re: [PATCH] libata: skip EH autopsy and recovery during suspend
  • From: Rafael J. Wysocki
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Siddhartha Jain
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Vladislav Bolkhovitin
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Stephan Diestelhorst
• Re: [PATCH] libata: skip EH autopsy and recovery during suspend
  • From: Stephan Diestelhorst
• Re: 3w-9xxx: scsi0: WARNING: (0x06:0x0037): Character ioctl (0x108) timed out, resetting card.
  • From: Justin Piszcz
• Re: 3w-9xxx: scsi0: WARNING: (0x06:0x0037): Character ioctl (0x108) timed out, resetting card.
  • From: Justin Piszcz
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Tejun Heo
• [PATCH] libata: skip EH autopsy and recovery during suspend
  • From: Tejun Heo
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Tejun Heo
• Re: WARNINGs because of ide-proc handling
  • From: David Miller
• Re: 3w-9xxx: scsi0: WARNING: (0x06:0x0037): Character ioctl (0x108) timed out, resetting card.
  • From: adam radford
• [PATCH] libata: SSD horkage introduction
  • From: Peter M. Petrakis
• [PATCH] SSD quirking revisited
  • From: Peter M. Petrakis
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Siddhartha Jain
• RE: [PATCH] libata-sff: Reenable Port Multiplier after libata-sff remodeling.
  • From: Kalra Ashish-B00888
• [PATCH 5/5] ata_piix: implement LPM support
  • From: Tejun Heo
• [PATCH 1/5] libata: clean up lpm related symbols and sysfs show/store functions
  • From: Tejun Heo
• [PATCH 3/5] libata: reimplement link power management
  • From: Tejun Heo
• [PATCH 2/5] libata: implement sata_link_scr_lpm() and make ata_dev_set_feature() global
  • From: Tejun Heo
• [PATCHSET #upstream] libata: reimplement LPM support
  • From: Tejun Heo
• [PATCH 4/5] libata: implement LPM support for port multipliers
  • From: Tejun Heo
• Re: 3w-9xxx: scsi0: WARNING: (0x06:0x0037): Character ioctl (0x108) timed out, resetting card.
  • From: Justin Piszcz
• Re: [PATCH] libata-sff: Reenable Port Multiplier after libata-sff remodeling.
  • From: Tejun Heo
• Re: safety of retrying SYNCHRONIZE CACHE [was: Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush]
  • From: Hannes Reinecke
• Re: safety of retrying SYNCHRONIZE CACHE [was: Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush]
  • From: Hannes Reinecke
• Re: [PATCH] libata-sff: Reenable Port Multiplier after libata-sff remodeling.
  • From: Gwendal Grignou
• safety of retrying SYNCHRONIZE CACHE [was: Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush]
  • From: Mike Snitzer
• Re: [PATCH] libata-sff: Reenable Port Multiplier after libata-sff remodeling.
  • From: Jeff Garzik
• [PATCH] libata-sff: Reenable Port Multiplier after libata-sff remodeling.
  • From: Gwendal Grignou
• Re: [PATCH] libata-sff: Reenable Port Multiplier after libata-sff remodeling.
  • From: Gwendal Grignou
• WARNINGs because of ide-proc handling
  • From: Wolfram Sang
• Re: 3w-9xxx: scsi0: WARNING: (0x06:0x0037): Character ioctl (0x108) timed out, resetting card.
  • From: adam radford
• Re: [opensuse-kernel] SSD / filesystem / TRIM
  • From: Greg Freemyer
• Re: sata_sil boot failure with 2.6.35
  • From: Jan Beulich
• Re: [opensuse-kernel] SSD / filesystem / TRIM
  • From: Mark Lord
• Re: [opensuse-kernel] SSD / filesystem / TRIM
  • From: Greg Freemyer
• Re: [opensuse-kernel] SSD / filesystem / TRIM
  • From: Mark Lord
• Re: 3w-9xxx: scsi0: WARNING: (0x06:0x0037): Character ioctl (0x108) timed out, resetting card.
  • From: Justin Piszcz
• Re: 3w-9xxx: scsi0: WARNING: (0x06:0x0037): Character ioctl (0x108) timed out, resetting card.
  • From: Justin Piszcz
• Re: 3w-9xxx: scsi0: WARNING: (0x06:0x0037): Character ioctl (0x108) timed out, resetting card.
  • From: Justin Piszcz
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Boaz Harrosh
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Tejun Heo
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Boaz Harrosh
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Boaz Harrosh
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Tejun Heo
• Re: [PATCH] libata-sff: Reenable Port Multiplier after libata-sff remodeling.
  • From: Tejun Heo
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Siddhartha Jain
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Siddhartha Jain
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Siddhartha Jain
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Jeff Moyer
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Jan Kara
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Vladislav Bolkhovitin
• Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush
  • From: Vladislav Bolkhovitin
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Ric Wheeler
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Jan Kara
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Jeff Moyer
• Re: [opensuse-kernel] SSD / filesystem / TRIM
  • From: Greg Freemyer
• Re: [PATCH] libata-sff: Reenable Port Multiplier after libata-sff remodeling.
  • From: Gwendal Grignou
• [PATCH] libata-sff: Reenable Port Multiplier after libata-sff remodeling.
  • From: Gwendal Grignou
• Re: [PATCH 04/30] block: deprecate barrier and replace blk_queue_ordered() with blk_queue_flush()
  • From: Boaz Harrosh
• [PATCH] pata_artop: Fix device ID parity check
  • From: Jean Delvare
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Siddhartha Jain
• Re: [dm-devel] [RFC] training mpath to discern between SCSI errors
  • From: Hannes Reinecke
• Re: sata_sil boot failure with 2.6.35
  • From: Tejun Heo
• Re: sata_sil boot failure with 2.6.35
  • From: Tejun Heo
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Tejun Heo
• Re: [RFC] training mpath to discern between SCSI errors
  • From: Hannes Reinecke
• Re: [RFC] training mpath to discern between SCSI errors
  • From: Sergei Shtylyov
• Re: [RFC] training mpath to discern between SCSI errors
  • From: Hannes Reinecke
• Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush
  • From: Hannes Reinecke
• Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush
  • From: Hannes Reinecke
• Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush
  • From: Kiyoshi Ueda
• Re: 3w-9xxx: scsi0: WARNING: (0x06:0x0037): Character ioctl (0x108) timed out, resetting card.
  • From: Justin Piszcz
• Re: [PATCH] libata-sff: Reenable Port Multiplier after libata-sff remodeling.
  • From: Tejun Heo
• silicon image 3114 DMA polling
  • From: amruth pattanada
• Re: possible esata regression in 2.6.35
  • From: Gwendal Grignou
• Re: qc timeout ... failed to IDENTIFY - qemu/kvm setup
  • From: Gwendal Grignou
• [PATCH] libata-sff: Reenable Port Multiplier after libata-sff remodeling.
  • From: Gwendal Grignou
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Siddhartha Jain
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Rafael J. Wysocki
• Re: possible esata regression in 2.6.35
  • From: Gwendal Grignou
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Jan Kara
• Re: 3w-9xxx: scsi0: WARNING: (0x06:0x0037): Character ioctl (0x108) timed out, resetting card.
  • From: Justin Piszcz
• Re: 3w-9xxx: scsi0: WARNING: (0x06:0x0037): Character ioctl (0x108) timed out, resetting card.
  • From: adam radford
• Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush
  • From: Mike Snitzer
• 3w-9xxx: scsi0: WARNING: (0x06:0x0037): Character ioctl (0x108) timed out, resetting card.
  • From: Justin Piszcz
• Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush
  • From: Kiyoshi Ueda
• Re: [PATCH] block: update documentation for REQ_FLUSH / REQ_FUA
  • From: Tejun Heo
• [PATCH #upstream-fixes] ahci: fix hang on failed softreset
  • From: Tejun Heo
• Re: ahci port hangs while hard resetting link
  • From: Tejun Heo
• Re: possible esata regression in 2.6.35
  • From: Gwendal Grignou
• Re: ahci port hangs while hard resetting link
  • From: Gwendal Grignou
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Rafael J. Wysocki
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Rafael J. Wysocki
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Rafael J. Wysocki
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Stephan Diestelhorst
• [PATCH] block: update documentation for REQ_FLUSH / REQ_FUA
  • From: Christoph Hellwig
• [PATCH UPDATED 24.5/30] jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
  • From: Tejun Heo
• Re: [PATCH 24.5/30] jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
  • From: Sergei Shtylyov
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Tejun Heo
• [PATCH 24.5/30] jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
  • From: Tejun Heo
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Jan Kara
• Re: [RFC] training mpath to discern between SCSI errors
  • From: Mike Christie
• [PATCH 20/30] btrfs: replace barriers with explicit flush / FUA usage
  • From: Tejun Heo
• [PATCH 21/30] gfs2: replace barriers with explicit flush / FUA usage
  • From: Tejun Heo
• [PATCH 02/30] block/loop: queue ordered mode should be DRAIN_FLUSH
  • From: Tejun Heo
• [PATCH 25/30] jbd2: replace barriers with explicit flush / FUA usage
  • From: Tejun Heo
• [PATCH 12/30] block: use REQ_FLUSH in blkdev_issue_flush()
  • From: Tejun Heo
• [PATCH 15/30] virtio_blk: drop REQ_HARDBARRIER support
  • From: Tejun Heo
• Re: [PATCHSET 2.6.36-rc2] block, fs: replace HARDBARRIER with FLUSH/FUA
  • From: Mike Snitzer
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Tejun Heo
• [PATCH 29/30] block: remove the BLKDEV_IFL_BARRIER flag
  • From: Tejun Heo
• [PATCH 07/30] block: drop barrier ordering by queue draining
  • From: Tejun Heo
• [PATCH 08/30] block: rename blk-barrier.c to blk-flush.c
  • From: Tejun Heo
• [PATCH 13/30] block: simplify queue_next_fseq
  • From: Tejun Heo
• [PATCH 30/30] block: remove the BH_Eopnotsupp flag
  • From: Tejun Heo
• [PATCH 09/30] block: rename barrier/ordered to flush
  • From: Tejun Heo
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Christoph Hellwig
• Re: [PATCH 26/30] ext4: do not send discards as barriers
  • From: Christoph Hellwig
• Re: [PATCH 29/30] block: remove the BLKDEV_IFL_BARRIER flag
  • From: Christoph Hellwig
• [RFC] training mpath to discern between SCSI errors (was: Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush)
  • From: Mike Snitzer
• [PATCH 27/30] fat: do not send discards as barriers
  • From: Tejun Heo
• [PATCH 01/30] ide: remove unnecessary blk_queue_flushing() test in do_ide_request()
  • From: Tejun Heo
• [PATCHSET 2.6.36-rc2] block, fs: replace HARDBARRIER with FLUSH/FUA
  • From: Tejun Heo
• [PATCH 11/30] block: filter flush bio's in __generic_make_request()
  • From: Tejun Heo
• [PATCH 06/30] block: misc cleanups in barrier code
  • From: Tejun Heo
• [PATCH 10/30] block: implement REQ_FLUSH/FUA based interface for FLUSH/FUA requests
  • From: Tejun Heo
• [PATCH 17/30] md: implment REQ_FLUSH/FUA support
  • From: Tejun Heo
• [PATCH 14/30] block/loop: implement REQ_FLUSH/FUA support
  • From: Tejun Heo
• [PATCH 28/30] swap: do not send discards as barriers
  • From: Tejun Heo
• [PATCH 03/30] block: kill QUEUE_ORDERED_BY_TAG
  • From: Tejun Heo
• [PATCH 16/30] lguest: replace VIRTIO_F_BARRIER support with VIRTIO_F_FLUSH support
  • From: Tejun Heo
• [PATCH 22/30] reiserfs: replace barriers with explicit flush / FUA usage
  • From: Tejun Heo
• [PATCH 18/30] block: pass gfp_mask and flags to sb_issue_discard
  • From: Tejun Heo
• [PATCH 19/30] xfs: replace barriers with explicit flush / FUA usage
  • From: Tejun Heo
• [PATCH 05/30] block: remove spurious uses of REQ_HARDBARRIER
  • From: Tejun Heo
• [PATCH 04/30] block: deprecate barrier and replace blk_queue_ordered() with blk_queue_flush()
  • From: Tejun Heo
• [PATCH 26/30] ext4: do not send discards as barriers
  • From: Tejun Heo
• [PATCH 23/30] nilfs2: replace barriers with explicit flush / FUA usage
  • From: Tejun Heo
• [PATCH 24/30] jbd: replace barriers with explicit flush / FUA usage
  • From: Tejun Heo
• Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush
  • From: Mike Snitzer
• Re: [PATCH UPDATED 4/5] md: implment REQ_FLUSH/FUA support
  • From: Neil Brown
• Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush
  • From: Jens Axboe
• [PATCH UPDATED 4/5] md: implment REQ_FLUSH/FUA support
  • From: Tejun Heo
• Re: sata_sil boot failure with 2.6.35
  • From: Jan Beulich
• Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush
  • From: Kiyoshi Ueda
• Re: promise sataII 150 TX4 issue
  • From: Robert Hancock
• Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush
  • From: Alan Cox
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Rafael J. Wysocki
• Re: ahci port hangs while hard resetting link
  • From: Anssi Hannula
• Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush
  • From: Tejun Heo
• Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush
  • From: Mike Snitzer
• Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush
  • From: Vladislav Bolkhovitin
• Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush
  • From: Tejun Heo
• Re: ahci port hangs while hard resetting link
  • From: Tejun Heo
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Stephan Diestelhorst
• Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
  • From: Stephan Diestelhorst
• Re: sata_sil boot failure with 2.6.35
  • From: Tejun Heo
• Re: sata_sil boot failure with 2.6.35
  • From: Jan Beulich
• Re: sata_sil boot failure with 2.6.35
  • From: Tejun Heo
• Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush
  • From: Kiyoshi Ueda