Dear Sergei, > Hello. > > On 11-12-2010 23:37, Igor Plyatov wrote: > > > The AT91SAM9 microcontrollers with master clock higher then 105 MHz > > and PIO0, have overflow of the NCS_RD_PULSE value in the MSB. This > > lead to "NCS_RD_PULSE" pulse longer then "NRD_CYCLE" pulse and driver > > does not detect ATA device. > > > Signed-off-by: Igor Plyatov<plyatov@xxxxxxxxx> > [...] Please use more descriptive comments, because it is not clear what you mean here. Maybe here you just cut a text... It is so strange to cut such small amount of text and I does not have any idea why here is "[...]" exists. > > diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c > > index 0da0dcc..a462405 100644 > > --- a/drivers/ata/pata_at91.c > > +++ b/drivers/ata/pata_at91.c > [...] The same as above. Nobody are able to read you mind on the distance :-) > > @@ -50,7 +52,7 @@ struct at91_ide_info { > > }; > > > > static const struct ata_timing initial_timing = > > - {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0}; > > + {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 0, 600, 0}; > > BTW, you haven't described this in the changelog... Here is just a typo fixed for the ata_timing structure. This typo does not have influence on the driver operation, but I do not like to leave such a negligible problem as it is. > WBR, Sergei Best regards! -- Igor Plyatov -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html