Linux IDE Archive
[Prev Page][Next Page]
- [PATCH] ide: palm_bk3710: add __initdata to palm_bk3710_port_info
- Re: [PATCH 2/2] arm64: dts: updated sata node on ls1046a dts
- Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
- Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
- Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
- Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
- From: Bartlomiej Zolnierkiewicz
- LSF/MM 2017: Call for Proposals
- Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
- Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
- From: Bartlomiej Zolnierkiewicz
- RE:FW : Gravity die casting with A356-T6
- Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- RE: [v2,3/3] dt-bindings: ata: ahci_tegra: Add tegra210 AHCI
- [ata] bea5b158ff WARNING: CPU: 0 PID: 1 at drivers/ata/libata-core.c:6482 ata_port_detach
- RE: [v2,3/3] dt-bindings: ata: ahci_tegra: Add tegra210 AHCI
- RE: [v2,2/3] ata: ahci_tegra: Add support to disable features
- Re: [v2,2/3] ata: ahci_tegra: Add support to disable features
- RE: [v2,2/3] ata: ahci_tegra: Add support to disable features
- Re: [v2,1/3] ata: ahci_tegra: add support for tegra210
- RE: [v2,1/3] ata: ahci_tegra: add support for tegra210
- Re: [PATCH] set a base index for libsas based ata devices
- [PATCH] ata: sata_mv: fix module license specification
- Re: [PATCH] set a base index for libsas based ata devices
- [PATCH] set a base index for libsas based ata devices
- Re: [PATCH 1/1] libata: Fix ATA request sense
- Re: [PATCH 1/1] libata: Fix ATA request sense
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH 1/1] libata: Fix ATA request sense
- Re: [PATCH 1/1] libata: Fix ATA request sense
- [PATCH 1/1] libata: Fix ATA request sense
- Errors on Marvell
- [GIT PULL UPDATED] libata changes for v4.10-rc1
- Re: [GIT PULL] libata changes for v4.10-rc1
- Re: [GIT PULL] libata changes for v4.10-rc1
- [GIT PULL] libata changes for v4.10-rc1
- [V1] ata: sata_mv:- Handle return value of devm_ioremap.
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [RESEND PATCH] arm: assabet_defconfig: disable IDE subsystem
- Re: [RESEND PATCH] arm: assabet_defconfig: disable IDE subsystem
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- From: Bartlomiej Zolnierkiewicz
- [GIT PULL] libata fixes for v4.9-rc8
- Re: [RFC PATCH 00/19] ide: remove deprecated host drivers (part 1)
- Re: [RFC PATCH 00/19] ide: remove deprecated host drivers (part 1)
- From: Bartlomiej Zolnierkiewicz
- Re: [RFC PATCH 00/19] ide: remove deprecated host drivers (part 1)
- Re: [RFC PATCH 00/19] ide: remove deprecated host drivers (part 1)
- Re: [RFC PATCH 00/19] ide: remove deprecated host drivers (part 1)
- From: Bartlomiej Zolnierkiewicz
- Re: LSF/MM 2017: Call for Proposals
- Re: LSF/MM 2017: Call for Proposals
- Re: [RFC PATCH 00/19] ide: remove deprecated host drivers (part 1)
- Re: [RFC PATCH 00/19] ide: remove deprecated host drivers (part 1)
- From: Bartlomiej Zolnierkiewicz
- Re: LSF/MM 2017: Call for Proposals
- Re: [Lsf-pc] LSF/MM 2017: Call for Proposals
- Re: [PATCH] libata-scsi: disable SCT Write Same for the moment
- [PATCH] libata-scsi: disable SCT Write Same for the moment
- Re: LSF/MM 2017: Call for Proposals
- [PATCH v7 2/4] ata: Enabling ATA Command Priorities
- Re: [PATCH v7 0/4] Enabling ATA Command Priorities
- [PATCH v7 1/4] block: Add iocontext priority to request
- [PATCH v7 0/4] Enabling ATA Command Priorities
- [PATCH v7 3/4] ata: ATA Command Priority Disabled By Default
- [PATCH v7 4/4] ata: set ncq_prio_enabled iff device has support
- Re: detect and warn about ahci-remapped NVMe devices
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH 2/3] ahci-remap.h: add ahci remapping definitions
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH 2/3] ahci-remap.h: add ahci remapping definitions
- [PATCH 3/3] ahci: warn about remapped NVMe devices
- [PATCH 2/3] ahci-remap.h: add ahci remapping definitions
- [PATCH 1/3] nvme: move NVMe class code to pci_ids.h
- detect and warn about ahci-remapped NVMe devices
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- From: One Thousand Gnomes
- Re: Forcing a CAP register value to make booting more reliable on the Acer Aspire Switch Alpha 12 tablet
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH] PCI:MSI Return -ENOSPC when requested vectors is not enough
- [PATCH] PCI:MSI Return -ENOSPC when requested vectors is not enough
- Forcing CAP register value to make booting more reliable on the Acer Aspire Switch Alpha 12 tablet
- Re: [PATCH] PCI:MSI Return -ENOSPC when requested vectors is not enough
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- From: One Thousand Gnomes
- [PATCH,v3] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH,v2] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- [PATCH,v2] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- From: One Thousand Gnomes
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] ata: disable port while unloading ATA controller driver
- Re: [PATCH] ata: disable port while unloading ATA controller driver
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH] ata: disable port while unloading ATA controller driver
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH] ata: disable port while unloading ATA controller driver
- Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH] ata: disable port while unloading ATA controller driver
- Re: [PATCH] ata: disable port while unloading ATA controller driver
- [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
- Re: [PATCH] ata: sata_mv: check for errors when parsing nr-ports from dt
- [PATCH] ata: sata_mv: check for errors when parsing nr-ports from dt
- Re: [PATCH] ata: disable port while unloading ATA controller driver
- [GIT PULL] libata fixes for v4.9-rc7
- Re: [PATCH] ata: disable port while unloading ATA controller driver
- Re: [v2,3/3] dt-bindings: ata: ahci_tegra: Add tegra210 AHCI
- Re: [v2,3/3] dt-bindings: ata: ahci_tegra: Add tegra210 AHCI
- Re: [v2,2/3] ata: ahci_tegra: Add support to disable features
- Re: [v2,1/3] ata: ahci_tegra: add support for tegra210
- Re: [PATCH] ata: disable port while unloading ATA controller driver
- [PATCH] ata: disable port while unloading ATA controller driver
- Re: [RESEND PATCH] arm: assabet_defconfig: disable IDE subsystem
- [PATCH v2 1/3] ata: ahci_tegra: add support for tegra210
- From: Preetham Chandru Ramchandra
- [PATCH v2 2/3] ata: ahci_tegra: Add support to disable features
- From: Preetham Chandru Ramchandra
- [PATCH v2 0/3] ADD AHCI support for tegra210
- From: Preetham Chandru Ramchandra
- [PATCH v2 3/3] dt-bindings: ata: ahci_tegra: Add tegra210 AHCI
- From: Preetham Chandru Ramchandra
- Re: [PATCH] ahci: always fall back to single-MSI mode
- [Bug 188141] New: PCI0680 can't work reliably in UDMA mode over 33
- [Bug 185531] pata_hpt366 irq xx: nobody cared
- Re: [PATCH 0/5] ahci: nvme remap support
- Re: [PATCH 1/2] dt-bindings: ahci-fsl-qoriq: added explanation for reg-names
- [PATCH] ahci: always fall back to single-MSI mode
- [PATCH v2] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
- From: Rameshwar Prasad Sahu
- Re: [RFT] powerpc: convert chrp32_defconfig to use libata PATA drivers
- Re: [RFT] powerpc: convert maple_defconfig to use libata PATA drivers
- Re: [RFT] powerpc: convert g5_defconfig to use libata PATA drivers
- Re: [RFT] powerpc: convert pmac32_defconfig to use libata PATA drivers
- Re: [RFT] powerpc: convert cell_defconfig to use libata PATA drivers
- Re: powerpc: disable IDE subsystem in pasemi_defconfig
- Re: [RFT] powerpc: convert ppc64e_defconfig to use libata PATA drivers
- Re: [RFT] powerpc: convert ppc6xx_defconfig to use libata PATA drivers
- Re: [RFT] powerpc: convert pseries_defconfig to use libata PATA drivers
- Re: [RFT] powerpc: convert storcenter_defconfig to use libata PATA drivers
- Re: [RFT] powerpc: convert ppc64_defconfig to use libata PATA drivers
- Re: [RFT] powerpc: convert amigaone_defconfig to use libata PATA drivers
- [PATCH 2/2] arm64: dts: updated sata node on ls1046a dts
- [PATCH 1/2] dt-bindings: ahci-fsl-qoriq: added explanation for reg-names
- Re: [PATCH 1/2] ahci: qoriq: added a condition to enable dma coherence
- Re: [PATCH 2/2] ahci: qoriq: report warning when ecc register is missing
- [PATCH 2/2] ahci: qoriq: report warning when ecc register is missing
- [PATCH 1/2] ahci: qoriq: added a condition to enable dma coherence
- Re: [PATCH 0/5] ahci: nvme remap support
- Re: [PATCH] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
- Re: [PATCH 3/4] pata: imx: add support of setting timings for PIO modes
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
- Re: [PATCH 3/4] pata: imx: add support of setting timings for PIO modes
- Re: [PATCH 3/4] pata: imx: add support of setting timings for PIO modes
- Re: [PATCH 0/4] pata: imx: set timings for PIO modes up to PIO4
- Re: [PATCH] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
- Re: [PATCH] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
- Re: [PATCH 3/4] pata: imx: add support of setting timings for PIO modes
- [PATCH 2/4] pata: imx: set controller PIO mode with .set_piomode callback
- [PATCH 1/4] pata: imx: sort headers out
- [PATCH 3/4] pata: imx: add support of setting timings for PIO modes
- [PATCH 4/4] pata: imx: support controller modes up to PIO4
- [PATCH 0/4] pata: imx: set timings for PIO modes up to PIO4
- Re: [RFC PATCH v3 1/2] Add support for eXclusive Page Frame Ownership (XPFO)
- Re: Write performance 50% compared to Windows
- Re: Write performance 50% compared to Windows
- Re: Write performance 50% compared to Windows
- Re: [PATCH] libata-scsi: Fixup ata_gen_passthru_sense()
- Re: Write performance 50% compared to Windows
- Re: Write performance 50% compared to Windows
- Write performance 50% compared to Windows
- Re: sata_sil24: swiotlb buffer is full ?
- Re: Possible Bug In ATA/SCSI Fixed Sense
- [PATCH] libata-scsi: Fixup ata_gen_passthru_sense()
- Re: sata_sil24: swiotlb buffer is full ?
- From: Konrad Rzeszutek Wilk
- Re: [RESEND PATCH] arm: assabet_defconfig: disable IDE subsystem
- From: Bartlomiej Zolnierkiewicz
- Re: [RESEND PATCH] arm: assabet_defconfig: disable IDE subsystem
- From: Bartlomiej Zolnierkiewicz
- Re: sata_sil24: swiotlb buffer is full ?
- Re: Possible Bug In ATA/SCSI Fixed Sense
- Re: [RESEND PATCH] arm: assabet_defconfig: disable IDE subsystem
- From: Russell King - ARM Linux
- sata_sil24: swiotlb buffer is full ?
- [Bug 185531] New: pata_hpt366 irq xx: nobody cared
- Possible Bug In ATA/SCSI Fixed Sense
- Re: [RFC PATCH] ata: piix: wait for end of asynchronous probing before
- Re: [RFC PATCH] ata: piix: wait for end of asynchronous probing before
- Re: [RFC] libata-scsi: introducing SANITIZE translation
- Re: [GIT PULL] libata fixes for v4.9-rc2
- [GIT PULL] libata fixes for v4.9-rc2
- Re: [RESEND PATCH] arm: assabet_defconfig: disable IDE subsystem
- From: Bartlomiej Zolnierkiewicz
- [PATCH v3 1/1] ahci: imx: Add imx53 SATA temperature sensor support
- Re: [PATCH] ahci: fix the single MSI-X case in ahci_init_one
- [PATCH] ahci: fix the single MSI-X case in ahci_init_one
- Re: [PATCH] ahci: use pci_alloc_irq_vectors
- Re: [PATCH] ahci: use pci_alloc_irq_vectors
- Re: [PATCH 0/5] ahci: nvme remap support
- Re: [PATCH] ahci: use pci_alloc_irq_vectors
- Re: [PATCH] ahci: use pci_alloc_irq_vectors
- Re: [PATCH 0/5] ahci: nvme remap support
- Re: [PATCH 0/5] ahci: nvme remap support
- Re: [PATCH 0/5] ahci: nvme remap support
- Re: [PATCH 0/5] ahci: nvme remap support
- Re: [PATCH 0/5] ahci: nvme remap support
- Re: [PATCH 0/5] ahci: nvme remap support
- Re: [PATCH 0/5] ahci: nvme remap support
- Re: [PATCH 0/5] ahci: nvme remap support
- Re: [PATCH 0/5] ahci: nvme remap support
- Re: [PATCH 0/5] ahci: nvme remap support
- Re: [PATCH] ahci: use pci_alloc_irq_vectors
- Re: [PATCH 0/5] ahci: nvme remap support
- [PATCH 5/5] nvme: ahci remap support
- [PATCH 4/5] nvme: move common definitions to pci.h
- [PATCH 3/5] nvme: introduce nvme_dev_ops
- [PATCH 2/5] nvme: rename "pci" operations to "mmio"
- [PATCH 1/5] ahci: nvme remap support
- [PATCH 0/5] ahci: nvme remap support
- Re: Regression with 0b9e2988ab22 ("ahci: use pci_alloc_irq_vectors")
- Re: [PATCH] ahci: use pci_alloc_irq_vectors
- Re: Regression with 0b9e2988ab22 ("ahci: use pci_alloc_irq_vectors")
- Regression with 0b9e2988ab22 ("ahci: use pci_alloc_irq_vectors")
- Re: [PATCH] ahci: use pci_alloc_irq_vectors
- Re: [PATCH v2 1/1] ahci: imx: Add imx53 SATA temperature sensor support
- From: Bartlomiej Zolnierkiewicz
- [PATCH v2 1/1] ahci: imx: Add imx53 SATA temperature sensor support
- Re: [PATCH] ahci: use pci_alloc_irq_vectors
- Re: [PATCH] ahci: fix nvec check
- Re: [PATCH] ahci: fix nvec check
- [PATCH] ahci: fix nvec check
- Re: [PATCH] ata: set ncq_prio_enabled if device has support
- [PATCH] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
- From: Rameshwar Prasad Sahu
- [PATCH] ata: set ncq_prio_enabled if device has support
- Re: [PATCH v6 3/3] ata: ATA Command Priority Disabled By Default
- Re: [PATCH 2/2] ata: ahci_tegra: add support for tegra210
- Re: [PATCH v6 0/3] Enabling ATA Command Priorities
- Re: [PATCH v6 3/3] ata: ATA Command Priority Disabled By Default
- Re: [PATCH v6 2/3] ata: Enabling ATA Command Priorities
- [PATCH 2/2] ata: ahci_tegra: add support for tegra210
- From: Preetham Chandru Ramchandra
- [PATCH 1/2] dt-bindings: ata: ahci_tegra: Add tegra210 AHCI support
- From: Preetham Chandru Ramchandra
- [PATCH 0/2] ADD AHCI support for tegra210
- From: Preetham Chandru Ramchandra
- Re: [PATCH v6 3/3] ata: ATA Command Priority Disabled By Default
- Re: [PATCH v6 1/3] block: Add iocontext priority to request
- Re: [PATCH v6 3/3] ata: ATA Command Priority Disabled By Default
- Re: [PATCH v6 1/3] block: Add iocontext priority to request
- Re: [PATCH] ahci: qoriq: added ls1046a platform support
- Re: [PATCH v2 1/1] ahci: imx: Add imx53 SATA temperature sensor support
- Re: [RFC PATCH] ata: piix: wait for end of asynchronous probing before
- Re: [PATCH] ahci: only try to use multi-MSI mode if there is more than 1 port
- [PATCH] ahci: only try to use multi-MSI mode if there is more than 1 port
- Re: use pci_alloc_irq_vectors issues
- Re: use pci_alloc_irq_vectors issues
- libahci ->irq_handler vs AHCI_HFLAG_MULTI_MSI
- Re: use pci_alloc_irq_vectors issues
- [PATCH v6 2/3] ata: Enabling ATA Command Priorities
- [PATCH v6 0/3] Enabling ATA Command Priorities
- [PATCH v6 3/3] ata: ATA Command Priority Disabled By Default
- [PATCH v6 1/3] block: Add iocontext priority to request
- [RFC PATCH] ata: piix: wait for end of asynchronous probing before
- Re: Possible bug cause by Commit 5b01e4b9efa0b78672cbbea830c9fbcc7f239e29 >libata: Implement NCQ autosense
- Re: use pci_alloc_irq_vectors issues
- Re: use pci_alloc_irq_vectors issues
- Re: use pci_alloc_irq_vectors issues
- Re: use pci_alloc_irq_vectors issues
- [PATCH v2 1/1] ahci: imx: Add imx53 SATA temperature sensor support
- Re: use pci_alloc_irq_vectors issues
- Re: use pci_alloc_irq_vectors issues
- Re: use pci_alloc_irq_vectors issues
- Re: use pci_alloc_irq_vectors issues
- Re: [PATCH v4 1/4] block: Add iocontext priority to request
- Re: [PATCH v4 1/4] block: Add iocontext priority to request
- Re: [PATCH v5 2/4] fusion: remove iopriority handling
- Re: [PATCH v4 2/4] fusion: remove iopriority handling
- Re: [PATCH v4 1/4] block: Add iocontext priority to request
- Re: [PATCH v5 2/4] fusion: remove iopriority handling
- [Bug 176931] ata failed to IDENTIFY, suspected regression
- [GIT PULL] libata changes for v4.9-rc1
- Re: [PATCH v4 2/4] fusion: remove iopriority handling
- Re: [PATCH v5 4/4] ata: ATA Command Priority Disabled By Default
- Re: [PATCH v5 2/4] fusion: remove iopriority handling
- Re: [PATCH v5 4/4] ata: ATA Command Priority Disabled By Default
- Re: [PATCH v5 3/4] ata: Enabling ATA Command Priorities
- [PATCH v5 3/4] ata: Enabling ATA Command Priorities
- [PATCH v5 4/4] ata: ATA Command Priority Disabled By Default
- [PATCH v5 2/4] fusion: remove iopriority handling
- [PATCH v5 1/4] block: Add iocontext priority to request
- [PATCH v5 0/4] Enabling ATA Command Priorities
- Re: [PATCH v4 1/4] block: Add iocontext priority to request
- Re: [PATCH v4 1/4] block: Add iocontext priority to request
- RE: [PATCH v4 2/4] fusion: remove iopriority handling
- From: Sathya Prakash Veerichetty
- Re: [PATCH v4 1/4] block: Add iocontext priority to request
- Re: [PATCH v4 1/4] block: Add iocontext priority to request
- Re: [PATCH v4 1/4] block: Add iocontext priority to request
- Re: [PATCH v4 1/4] block: Add iocontext priority to request
- Re: [PATCH v4 1/4] block: Add iocontext priority to request
- [PATCH v4 4/4] ata: ATA Command Priority Disabled By Default
- [PATCH v4 3/4] ata: Enabling ATA Command Priorities
- [PATCH v4 1/4] block: Add iocontext priority to request
- [PATCH v4 2/4] fusion: remove iopriority handling
- [PATCH v4 0/4] Enabling ATA Command Priorities
- Re: [PATCH v3 1/2] block: Add iocontext priority to request
- Re: [PATCH v3 1/2] block: Add iocontext priority to request
- Re: [PATCH v3 1/2] block: Add iocontext priority to request
- [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
- [PATCH v3 0/2] Enabling ATA Command Priorities
- [PATCH v3 2/2] ata: Enabling ATA Command Priorities
- [PATCH v3 1/2] block: Add iocontext priority to request
- Re: [PATCH v2 2/2] block: Add iocontext priority to request
- [Bug 176931] ata failed to IDENTIFY, suspected regression
- [PATCH] ahci: qoriq: added ls1046a platform support
- [Bug 176931] ata failed to IDENTIFY, suspected regression
- [Bug 176931] New: ata failed to IDENTIFY, suspected regression
- Re: [PATCH v2 2/2] block: Add iocontext priority to request
- Re: [PATCH v2 2/2] block: Add iocontext priority to request
- Re: [PATCH v2 1/2] ata: Enabling ATA Command Priorities
- [PATCH v2 2/2] block: Add iocontext priority to request
- [PATCH v2 1/2] ata: Enabling ATA Command Priorities
- [PATCH v2 0/2] Enabling ATA Command Priorities
- Re: [PATCH 1/3] block: Add iocontext priority to request
- Re: [PATCH 1/3] block: Add iocontext priority to request
- Re: [PATCH 1/3] block: Add iocontext priority to request
- RE: [PATCH] ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
- Re: [PATCH 2/3] ata: Enabling ATA Command Priorities
- Re: [PATCH 1/3] block: Add iocontext priority to request
- [PATCH] ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
- Re: [PATCH v2] ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
- [PATCH v2] ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
- Re: ATA failure regression
- Re: ATA failure regression
- From: Henrique de Moraes Holschuh
- Re: [PATCH] ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
- RE: [PATCH] ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
- Re: [PATCH] ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
- Re: [PATCH 0/3] Enabling ATA Command Priorities
- Re: [PATCH 2/3] ata: Enabling ATA Command Priorities
- Re: [PATCH 1/3] block: Add iocontext priority to request
- Re: ATA failure regression
- RE: ATA failure regression
- From: Shah, Nehal-bakulchandra
- Re: [PATCH 0/3] Enabling ATA Command Priorities
- [PATCH] ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
- Re: [PATCH 0/3] Enabling ATA Command Priorities
- [PATCH 2/3] ata: Enabling ATA Command Priorities
- [PATCH 3/3] ata: ATA Command Priority Disabled By Default
- [PATCH 1/3] block: Add iocontext priority to request
- [PATCH 0/3] Enabling ATA Command Priorities
- RE: ATA failure regression
- From: Shah, Nehal-bakulchandra
- [PATCH] ide: Use kmalloc_array() in hwif_init()
- Re: [PATCH 07/19] ahci: st: Remove STiH416 dt example
- RE: ATA failure regression
- From: Bharat Kumar Gogada
- RE: ATA failure regression
- From: Shah, Nehal-bakulchandra
- Re: small libata cleanup
- Re: [PATCH] Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR. Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR.
- Re: [PATCH] ata: Replace BUG() with BUG_ON().
- [PATCH 2/2] libata: remove <asm-generic/libata-portmap.h>
- [PATCH 1/2] libata: remove unused definitions from <asm/libata-portmap.h>
- small libata cleanup
- Re: [PATCH] Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR. Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR.
- Re: [PATCH] Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR. Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR.
- [PATCH] ata: Replace BUG() with BUG_ON().
- [PATCH] Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR. Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR.
- Re: [PATCH] ata: sata_mv: Replacing dma_pool_alloc and memset with a single call dma_pool_zalloc.
- [PATCH] ata: sata_mv: Replacing dma_pool_alloc and memset with a single call dma_pool_zalloc.
- Re: [PATCH 07/19] ahci: st: Remove STiH416 dt example
- Re: [PATCH 07/19] ahci: st: Remove STiH416 dt example
- [PATCH 07/19] ahci: st: Remove STiH416 dt example
- Re: [PATCH] Some drives failing on SCT Write Same
- Re: [PATCH] Some drives failing on SCT Write Same
- Re: patch "libata: Add support for SCT Write Same" breaks system
- [PATCH] Some drives failing on SCT Write Same
- Re: patch "libata: Add support for SCT Write Same" breaks system
- Re: patch "libata: Add support for SCT Write Same" breaks system
- Re: patch "libata: Add support for SCT Write Same" breaks system
- patch "libata: Add support for SCT Write Same" breaks system
- Re: [PATCH] ahci: use pci_alloc_irq_vectors
- [PATCH] ahci: use pci_alloc_irq_vectors
- [no subject]
- Carrizo FCH SATA performance problems
- Re: [PATCH]pata_ninja32: Avoid corrupting status flags
- [GIT PULL] libata fixes for v4.8-rc4
- [PATCH]pata_ninja32: Avoid corrupting status flags
- From: One Thousand Gnomes
- Re: [PATCH v6 0/4] SCT Write Same
- Re: [PATCH v6 3/4 RESEND] SCT Write Same / DSM Trim
- Re: [PATCH] ata: do not hard code limit in ata_set_lba_range_entries()
- Re: [PATCH v6 3/4 RESEND] SCT Write Same / DSM Trim
- Re: [PATCH v6 2/4] Add support for SCT Write Same
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- Re: [PATCH v6 3/4 RESEND] SCT Write Same / DSM Trim
- Re: [PATCH v6 2/4] Add support for SCT Write Same
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- Re: [PATCH v6 2/4] Add support for SCT Write Same
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- [PATCH v6 3/4 RESEND] SCT Write Same / DSM Trim
- Re: [PATCH v6 2/4] Add support for SCT Write Same
- Re: [PATCH v6 2/4] Add support for SCT Write Same
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- Re: [PATCH] ata: do not hard code limit in ata_set_lba_range_entries()
- Re: [PATCH] ata: do not hard code limit in ata_set_lba_range_entries()
- Re: [PATCH v6 2/4] Add support for SCT Write Same
- Re: [PATCH v6 2/4] Add support for SCT Write Same
- Re: [PATCH] ata: do not hard code limit in ata_set_lba_range_entries()
- Re: [PATCH] ata: do not hard code limit in ata_set_lba_range_entries()
- Re: [PATCH] ata: do not hard code limit in ata_set_lba_range_entries()
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- Re: [PATCH] ata: do not hard code limit in ata_set_lba_range_entries()
- Re: [PATCH] ata: do not hard code limit in ata_set_lba_range_entries()
- Re: [PATCH v6 2/4] Add support for SCT Write Same
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- Re: [PATCH] ata: do not hard code limit in ata_set_lba_range_entries()
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- Re: [PATCH v6 2/4] Add support for SCT Write Same
- Re: [PATCH v6 2/4] Add support for SCT Write Same
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- Re: [PATCH v6 2/4] Add support for SCT Write Same
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- Re: [PATCH v6 2/4] Add support for SCT Write Same
- Re: [PATCH v6 2/4] Add support for SCT Write Same
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- Re: [PATCH v6 3/4] SCT Write Same / DSM Trim
- Re: [PATCH] ata: do not hard code limit in ata_set_lba_range_entries()
- Re: [PATCH] ata: do not hard code limit in ata_set_lba_range_entries()
- Re: [PATCH v6 2/4] Add support for SCT Write Same
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- Re: [PATCH] ata: do not hard code limit in ata_set_lba_range_entries()
- Re: [PATCH] ata: do not hard code limit in ata_set_lba_range_entries()
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- Re: [PATCH v6 2/4] Add support for SCT Write Same
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- Re: [PATCH v6 2/4] Add support for SCT Write Same
- [PATCH] ata: do not hard code limit in ata_set_lba_range_entries()
- Re: [PATCH v6 3/4] SCT Write Same / DSM Trim
- Re: [PATCH v6 3/4] SCT Write Same / DSM Trim
- Re: [PATCH v6 3/4] SCT Write Same / DSM Trim
- Re: [PATCH v6 3/4] SCT Write Same / DSM Trim
- Re: [PATCH v6 3/4] SCT Write Same / DSM Trim
- Re: [PATCH v6 3/4] SCT Write Same / DSM Trim
- Re: [PATCH v6 0/4] SCT Write Same
- Re: [PATCH v6 4/4] SCT Write Same handle ATA_DFLAG_PIO
- Re: [PATCH v6 3/4] SCT Write Same / DSM Trim
- Re: [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- Re: [PATCH v6 2/4] Add support for SCT Write Same
- [PATCH v6 1/4] libata: Safely overwrite attached page in WRITE SAME xlat
- [PATCH v6 2/4] Add support for SCT Write Same
- [PATCH v6 4/4] SCT Write Same handle ATA_DFLAG_PIO
- [PATCH v6 3/4] SCT Write Same / DSM Trim
- [PATCH v6 0/4] SCT Write Same
- Re: [RFC] libata-scsi: make sure Maximum Write Same Length is not too large
- Re: [PATCH v2 2/2] sd: check BLK_DEF_MAX_SECTORS against max_dev_sectors
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- From: One Thousand Gnomes
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: [PATCH v2 2/2] sd: check BLK_DEF_MAX_SECTORS against max_dev_sectors
- Re: Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: [RFC] libata-scsi: make sure Maximum Write Same Length is not too large
- Regression - SATA disks behind USB ones on v4.8-rc1, breaking boot. [Re: Who reordered my disks (probably v4.8-rc1 problem)]
- Re: [PATCH v2 2/2] sd: check BLK_DEF_MAX_SECTORS against max_dev_sectors
- Re: SATA port multipliers and max_channel
- Re: [PATCH 1/2] libata-scsi: use dev->max_sectors from libata-core appropriately
- SATA port multipliers and max_channel
- Re: [RFC] libata-scsi: make sure Maximum Write Same Length is not too large
- Re: [RFC] libata-scsi: make sure Maximum Write Same Length is not too large
- Re: [PATCH v2 2/2] sd: check BLK_DEF_MAX_SECTORS against max_dev_sectors
- Re: [PATCH v2 2/2] libata-core: do not set dev->max_sectors for LBA48 devices
- Re: [PATCH v2 2/2] libata-core: do not set dev->max_sectors for LBA48 devices
- Re: [RFC] libata-scsi: make sure Maximum Write Same Length is not too large
- Re: [PATCH 1/2] libata-scsi: use dev->max_sectors from libata-core appropriately
- Re: [PATCH 1/2] libata-scsi: use dev->max_sectors from libata-core appropriately
- [PATCH v2 2/2] sd: check BLK_DEF_MAX_SECTORS against max_dev_sectors
- [PATCH v2 1/2] libata-scsi: use dev->max_sectors from libata-core appropriately
- Re: [PATCH 1/2] libata-scsi: use dev->max_sectors from libata-core appropriately
- [PATCH 1/1] Add imx53 SATA temperature sensor support
- [PATCH 2/2] sd: check BLK_DEF_MAX_SECTORS against max_dev_sectors
- [PATCH 1/2] libata-scsi: use dev->max_sectors from libata-core appropriately
- Re: [PATCH v2 2/2] libata-core: do not set dev->max_sectors for LBA48 devices
- From: One Thousand Gnomes
- Re: [PATCH v2 2/2] libata-core: do not set dev->max_sectors for LBA48 devices
- Re: [PATCH v2 2/2] libata-core: do not set dev->max_sectors for LBA48 devices
- Re: [RFC] libata-scsi: make sure Maximum Write Same Length is not too large
- Re: [PATCH v2 2/2] libata-core: do not set dev->max_sectors for LBA48 devices
- Re: [RFC] libata-scsi: make sure Maximum Write Same Length is not too large
- Re: [PATCH v5 2/2] Add support for SCT Write Same
- Re: [RFC] libata-scsi: make sure Maximum Write Same Length is not too large
- Re: [PATCH 1/2] ahci: disable correct irq for dymmy ports
- Re: [RFC] libata-scsi: make sure Maximum Write Same Length is not too large
- Re: [PATCH 1/2] ahci: disable correct irq for dymmy ports
- Re: [PATCH 2/2] ahci: also use a per-port lock for the multi-MSIX case
- Re: [PATCH 1/2] ahci: disable correct irq for dymmy ports
- Re: Potential race condition in drivers/ata/sata_mv.ko
- [PATCH 2/2] ahci: also use a per-port lock for the multi-MSIX case
- [PATCH 1/2] ahci: disable correct irq for dymmy ports
- two ahci fixes from code inspection
- [PATCH 1/2] ahci: disable correct irq for dymmy ports
- Re: Potential race condition in drivers/ata/sata_mv.ko
- Re: [PATCH v5 1/2] Use kmap_atomic when rewriting attached page
- Re: [PATCH 1/2] ahci: st: Add ports-implemented property in support
- Re: [PATCH v2 2/2] libata-core: do not set dev->max_sectors for LBA48 devices
- Re: [PATCH v5 2/2] Add support for SCT Write Same
- [RFC] libata-scsi: make sure Maximum Write Same Length is not too large
- Re: [PATCH v5 2/2] Add support for SCT Write Same
- Re: [PATCH v2 2/2] libata-core: do not set dev->max_sectors for LBA48 devices
- Re: [PATCH v5 2/2] Add support for SCT Write Same
- Re: [PATCH v5 2/2] Add support for SCT Write Same
- Re: [PATCH v5 2/2] Add support for SCT Write Same
- Re: [PATCH v5 1/2] Use kmap_atomic when rewriting attached page
- Re: [PATCH v2 2/2] libata-core: do not set dev->max_sectors for LBA48 devices
- [PATCH 1/2] ahci: st: Add ports-implemented property in support
- [PATCH 0/2] STi: Add ports-implemented property support
- Re: Regarding AHCI_MAX_SG and (ATA_HORKAGE_MAX_SEC_1024)
- Re: [PATCH v5 2/2] Add support for SCT Write Same
- Re: [PATCH v5 2/2] Add support for SCT Write Same
- Re: [PATCH 0/2] STi: Add ports-implemented property support
- Re: [PATCH v5 2/2] Add support for SCT Write Same
- Re: [PATCH v5 1/2] Use kmap_atomic when rewriting attached page
- Re: Regarding AHCI_MAX_SG and (ATA_HORKAGE_MAX_SEC_1024)
- Re: Regarding AHCI_MAX_SG and (ATA_HORKAGE_MAX_SEC_1024)
- Re: Regarding AHCI_MAX_SG and (ATA_HORKAGE_MAX_SEC_1024)
- Re: [PATCH v2 2/2] libata-core: do not set dev->max_sectors for LBA48 devices
- Re: [PATCH v5 2/2] Add support for SCT Write Same
- [PATCH 2/2] ARM: dts: STiH407-family: Add ports-implemented property in sata nodes
- Re: Regarding AHCI_MAX_SG and (ATA_HORKAGE_MAX_SEC_1024)
- Re: [PATCH v2 2/2] libata-core: do not set dev->max_sectors for LBA48 devices
- Re: [PATCH 2/2] ahci: qoriq: enable snoopable sata read and write
- Re: Regarding AHCI_MAX_SG and (ATA_HORKAGE_MAX_SEC_1024)
- Re: Potential race condition in drivers/ata/sata_mv.ko
- Re: [PATCH resend 5/5] libata-scsi: fix MODE SELECT translation for Control mode page
- Re: [PATCH 1/1] Add CPU temperature sensor support for i.MX53
- [PATCH v5 2/2] Add support for SCT Write Same
- [PATCH v5 1/2] Use kmap_atomic when rewriting attached page
- [PATCH v5 0/2] Add support for SCT Write Same
- Re: [PATCH] Fix interface autodetection in legacy IDE driver
- Re: [PATCH resend v3 3/5] libata-scsi: use u8 array to store mode page copy
- Re: [PATCH v2 2/2] libata-core: do not set dev->max_sectors for LBA48 devices
- [PATCH v2 2/2] libata-core: do not set dev->max_sectors for LBA48 devices
- [PATCH v2 1/2] libata-scsi: set max_hw_sectors again only when dev->max_sectors is set
- Re: [PATCH] Fix interface autodetection in legacy IDE driver
- Re: [PATCH 1/2] libata-scsi: do not call blk_queue_max_hw_sectors()
- [PATCH] Fix interface autodetection in legacy IDE driver
- [PATCH 2/2] libata: do not set max_sectors for LBA48 device
- [PATCH 1/2] libata-scsi: do not call blk_queue_max_hw_sectors()
- [PATCH 2/2] ahci: qoriq: enable snoopable sata read and write
- [PATCH 1/2] ahci: qoriq: adjust sata parameter
- DMA on master drive stopped working after adding a slave drive
- Regarding AHCI_MAX_SG and (ATA_HORKAGE_MAX_SEC_1024)
- Potential race condition in drivers/ata/sata_mv.ko
- [PATCH 1/1] Add CPU temperature sensor support for i.MX53
- Re: [PATCH 0063/1285] Replace numeric parameter like 0444 with macro
- Re: [PATCH 0063/1285] Replace numeric parameter like 0444 with macro
- [PATCH 0065/1285] Replace numeric parameter like 0444 with macro
- [PATCH 0249/1285] Replace numeric parameter like 0444 with macro
- Re: [PATCH 0063/1285] Replace numeric parameter like 0444 with macro
- Re: [PATCH 0063/1285] Replace numeric parameter like 0444 with macro
- Re: [PATCH 0063/1285] Replace numeric parameter like 0444 with macro
- [PATCH 0246/1285] Replace numeric parameter like 0444 with macro
- [PATCH 0248/1285] Replace numeric parameter like 0444 with macro
- [PATCH 0245/1285] Replace numeric parameter like 0444 with macro
- [PATCH 0247/1285] Replace numeric parameter like 0444 with macro
- Re: [PATCH 0063/1285] Replace numeric parameter like 0444 with macro
- [PATCH 0061/1285] Replace numeric parameter like 0444 with macro
- [PATCH 0064/1285] Replace numeric parameter like 0444 with macro
- [PATCH 0059/1285] Replace numeric parameter like 0444 with macro
- [PATCH 0056/1285] Replace numeric parameter like 0444 with macro
- [PATCH 0066/1285] Replace numeric parameter like 0444 with macro
- [PATCH 0060/1285] Replace numeric parameter like 0444 with macro
- [PATCH 0055/1285] Replace numeric parameter like 0444 with macro
- [PATCH 0058/1285] Replace numeric parameter like 0444 with macro
- [PATCH 0063/1285] Replace numeric parameter like 0444 with macro
- [PATCH 0062/1285] Replace numeric parameter like 0444 with macro
- [PATCH 0057/1285] Replace numeric parameter like 0444 with macro
- Re: [PATCH] silence warning in drivers/ata/libata-scsi.c when building W=1
- Re: System lockup with misc ATAPI commands on VT6415
- Re: [PATCH v4] Add support for SCT Write Same
- [PATCH] silence warning in drivers/ata/libata-scsi.c when building W=1
- System lockup with misc ATAPI commands on VT6415
- From: Alexander Kandaurov
- [PATCH v4] Add support for SCT Write Same
- [GIT] IDE
- Re: [PATCH resend 5/5] libata-scsi: fix MODE SELECT translation for Control mode page
- Re: [PATCH] ide-tape: fix misprint in failure handling in idetape_init()
- Re: [patch] ide: missing break statement in set_timings_mdma()
- Re: [PATCH] ide: hpt366: fix incorrect mask when checking at cmd_high_time
- Re: [PATCH 5/5] cmd640: add __init attribute
- [GIT PULL] libata changes for v4.8-rc1
- [PATCH] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
- From: Rameshwar Prasad Sahu
- Re: [PATCH resend 5/5] libata-scsi: fix MODE SELECT translation for Control mode page
- [PATCH resend v3 3/5] libata-scsi: use u8 array to store mode page copy
- Re: [PATCH resend v2 3/5] libata-scsi: use u8 array to store mode page copy
- [Bug 139791] New: zoho support 18((886)))335**52**6 ZOHO PHONE NUMBER ||ZOHO TELEPHONE NUMBER||ZOHO NUMBER
- Re: [PATCH resend v2 3/5] libata-scsi: use u8 array to store mode page copy
- [PATCH resend v2 3/5] libata-scsi: use u8 array to store mode page copy
- [PATCH resend v2 2/5] libata-scsi: fix read-only bits checking in ata_mselect_*()
- [PATCH resend v2 3/5] libata-scsi: use u8 array to store mode page copy
- [PATCH resend v2 2/5] libata-scsi: fix read-only bits checking in ata_mselect_*()
- Re: [PATCH resend 2/5] libata-scsi: fix read-only bits checking in ata_mselect_*()
- Re: [PATCH resend 5/5] libata-scsi: fix MODE SELECT translation for Control mode page
- Re: [PATCH resend 3/5] libata-scsi: fix overflow in mode page copy
- Re: [PATCH resend 3/5] libata-scsi: fix overflow in mode page copy
- Re: [PATCH resend 5/5] libata-scsi: fix MODE SELECT translation for Control mode page
- Re: [PATCH resend 3/5] libata-scsi: fix overflow in mode page copy
- [Bug 136231] New: Describing << : 1~855~709~2847 Epson Printer Tech Support Phone Number
- Re: [PATCH resend 1/5] libata-scsi: minor cleanup in ata_mselect_*()
- Re: [PATCH resend 1/5] libata-scsi: minor cleanup in ata_mselect_*()
- [PATCH resend 2/5] libata-scsi: fix read-only bits checking in ata_mselect_*()
- [PATCH resend 4/5] libata-scsi: have all checks done before calling ata_mselect_*()
- [PATCH resend 5/5] libata-scsi: fix MODE SELECT translation for Control mode page
- [PATCH resend 3/5] libata-scsi: fix overflow in mode page copy
- [PATCH resend 1/5] libata-scsi: minor cleanup in ata_mselect_*()
- [GIT PULL] libata fixes for v4.7-rc7
- Re: [PATCH] libata: add parentheses to avoid a gcc warning
- [PATCH] libata: add parentheses to avoid a gcc warning
- Re: [PATCH v2] libata-scsi: fix read-only bits checking in ata_mselect_*()
- [tj-libata:for-4.8 41/41] drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&'
- Re: [PATCH v2] libata-scsi: fix read-only bits checking in ata_mselect_*()
- Re: [PATCH v4] libata-scsi: better style in ata_msense_*()
- Re: [PATCH v4] libata-scsi: minor cleanup in ata_mselect_*()
- Re: [PATCH] AHCI: Clear GHC.IS to prevent unexpectly asserting INTx
- Re: [PATCH v4] libata-scsi: minor cleanup in ata_mselect_*()
- [PATCH v2] libata-scsi: fix read-only bits checking in ata_mselect_*()
- Re: [PATCH] libata-scsi: fix read-only bits checking in ata_mselect_*()
- [PATCH] libata-scsi: fix read-only bits checking in ata_mselect_*()
- [PATCH v4] libata-scsi: minor cleanup in ata_mselect_*()
- Re: [PATCH v4] libata-scsi: better style in ata_msense_*()
- [PATCH v4] libata-scsi: better style in ata_msense_*()
- Re: [PATCH -next] ata: sata_dwc_460ex: remove redundant dev_err call
- [PATCH -next] ata: sata_dwc_460ex: remove redundant dev_err call
- Re: protocol flag cleanups
- [PATCH for-4.7-fixes] libata: LITE-ON CX1-JB256-HP needs lower max_sectors
- Re: BUG: INTx is assered unexpectly when unload AHCI driver with MSIx support.
- Re: [PATCH] ata: make lba_{28,48}_ok() use ATA_MAX_SECTORS{,_LBA48}
- Re: [PATCH] ata: hpt366: fix incorrect mask when checking at cmd_high_time
- From: One Thousand Gnomes
- Re: [RESEND PATCH] arm: assabet_defconfig: disable IDE subsystem
- Re: [PATCH 1/3] libata: remove ata_is_nodata
- Re: [PATCH 1/3] libata: remove ata_is_nodata
- Re: [PATCH 1/3] libata: remove ata_is_nodata
- [PATCH 3/3] ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_*
- [PATCH 2/3] libata: remove ATA_PROT_FLAG_DATA
- [PATCH 1/3] libata: remove ata_is_nodata
- protocol flag cleanups
- Re: [RESEND PATCH] arm: colibri_pxa270_defconfig: disable IDE subsystem
- Re: [RESEND PATCH] arm: assabet_defconfig: disable IDE subsystem
- Re: [PATCH 10/10] libata-scsi: minor cleanup for ata_scsi_zbc_out_xlat
- Re: [PATCH 04/10] ata: add ata_is_fpdma() accessor
- Re: [PATCH 04/10] ata: add ata_is_fpdma() accessor
- Re: [PATCH 04/10] ata: add ata_is_fpdma() accessor
- Re: [PATCH 06/10] libata-eh: decode all taskfile protocols
- [PATCH] ata: make lba_{28,48}_ok() use ATA_MAX_SECTORS{,_LBA48}
- Re: Fluctuating "acceptance" on requested data length in SATA/AHCI
- Fluctuating "acceptance" on requested data length in SATA/AHCI
- Re: [RFC 1/3] ata: bump ATA_MAX_SECTORS_LBA48 to 65536
- Re: [RFC 1/3] ata: bump ATA_MAX_SECTORS_LBA48 to 65536
- Re: [RFC 3/3] libata-scsi: add optimal transfer length to block limits VPD
- Re: [PATCH 04/10] ata: add ata_is_fpdma() accessor
- Re: [PATCH 04/10] ata: add ata_is_fpdma() accessor
- Re: [PATCH 04/10] ata: add ata_is_fpdma() accessor
- Re: [PATCH 06/10] libata-eh: decode all taskfile protocols
- Re: [PATCH 03/10] libsas: use ata_is_ncq() and ata_has_dma() accessors
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]