Add Palmchip BK3710 PATA controller driver. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx> --- drivers/ata/Kconfig | 9 ++ drivers/ata/Makefile | 1 + drivers/ata/pata_bk3710.c | 382 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 392 insertions(+) create mode 100644 drivers/ata/pata_bk3710.c diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 70b57d2..38fa4ac 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -510,6 +510,15 @@ config PATA_BF54X If unsure, say N. +config PATA_BK3710 + tristate "Palmchip BK3710 PATA support" + depends on ARCH_DAVINCI + help + This option enables support for the integrated IDE controller on + the TI DaVinci SoC. + + If unsure, say N. + config PATA_CMD64X tristate "CMD64x PATA support" depends on PCI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 89a0a19..9438db8 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_PATA_ARTOP) += pata_artop.o obj-$(CONFIG_PATA_ATIIXP) += pata_atiixp.o obj-$(CONFIG_PATA_ATP867X) += pata_atp867x.o obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o +obj-$(CONFIG_PATA_BK3710) += pata_bk3710.o obj-$(CONFIG_PATA_CMD64X) += pata_cmd64x.o obj-$(CONFIG_PATA_CS5520) += pata_cs5520.o obj-$(CONFIG_PATA_CS5530) += pata_cs5530.o diff --git a/drivers/ata/pata_bk3710.c b/drivers/ata/pata_bk3710.c new file mode 100644 index 0000000..1a1223f --- /dev/null +++ b/drivers/ata/pata_bk3710.c @@ -0,0 +1,382 @@ +/* + * Palmchip BK3710 PATA controller driver + * + * Copyright (c) 2017 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Based on palm_bk3710.c: + * + * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2007 MontaVista Software, Inc., <source@xxxxxxxxxx> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/ata.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/libata.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/types.h> + +#define DRV_NAME "pata_bk3710" + +#define BK3710_TF_OFFSET 0x1F0 +#define BK3710_CTL_OFFSET 0x3F6 + +#define BK3710_BMISP 0x02 +#define BK3710_IDETIMP 0x40 +#define BK3710_UDMACTL 0x48 +#define BK3710_MISCCTL 0x50 +#define BK3710_REGSTB 0x54 +#define BK3710_REGRCVR 0x58 +#define BK3710_DATSTB 0x5C +#define BK3710_DATRCVR 0x60 +#define BK3710_DMASTB 0x64 +#define BK3710_DMARCVR 0x68 +#define BK3710_UDMASTB 0x6C +#define BK3710_UDMATRP 0x70 +#define BK3710_UDMAENV 0x74 +#define BK3710_IORDYTMP 0x78 + +static struct scsi_host_template pata_bk3710_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static unsigned int ideclk_period; /* in nanoseconds */ + +struct pata_bk3710_udmatiming { + unsigned int rptime; /* tRP -- Ready to pause time (nsec) */ + unsigned int cycletime; /* tCYCTYP2/2 -- avg Cycle Time (nsec) */ + /* tENV is always a minimum of 20 nsec */ +}; + +static const struct pata_bk3710_udmatiming pata_bk3710_udmatimings[6] = { + { 160, 240 / 2 }, /* UDMA Mode 0 */ + { 125, 160 / 2 }, /* UDMA Mode 1 */ + { 100, 120 / 2 }, /* UDMA Mode 2 */ + { 100, 90 / 2 }, /* UDMA Mode 3 */ + { 100, 60 / 2 }, /* UDMA Mode 4 */ + { 85, 40 / 2 }, /* UDMA Mode 5 */ +}; + +static void pata_bk3710_setudmamode(void __iomem *base, unsigned int dev, + unsigned int mode) +{ + u32 val32; + u16 val16; + u8 tenv, trp, t0; + + /* DMA Data Setup */ + t0 = DIV_ROUND_UP(pata_bk3710_udmatimings[mode].cycletime, + ideclk_period) - 1; + tenv = DIV_ROUND_UP(20, ideclk_period) - 1; + trp = DIV_ROUND_UP(pata_bk3710_udmatimings[mode].rptime, + ideclk_period) - 1; + + /* udmastb Ultra DMA Access Strobe Width */ + val32 = ioread32(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8)); + val32 |= t0 << (dev ? 8 : 0); + iowrite32(val32, base + BK3710_UDMASTB); + + /* udmatrp Ultra DMA Ready to Pause Time */ + val32 = ioread32(base + BK3710_UDMATRP) & (0xFF << (dev ? 0 : 8)); + val32 |= trp << (dev ? 8 : 0); + iowrite32(val32, base + BK3710_UDMATRP); + + /* udmaenv Ultra DMA envelop Time */ + val32 = ioread32(base + BK3710_UDMAENV) & (0xFF << (dev ? 0 : 8)); + val32 |= tenv << (dev ? 8 : 0); + iowrite32(val32, base + BK3710_UDMAENV); + + /* Enable UDMA for Device */ + val16 = ioread16(base + BK3710_UDMACTL) | (1 << dev); + iowrite16(val16, base + BK3710_UDMACTL); +} + +static void pata_bk3710_setmwdmamode(void __iomem *base, unsigned int dev, + unsigned short min_cycle, + unsigned int mode) +{ + const struct ata_timing *t; + int cycletime; + u32 val32; + u16 val16; + u8 td, tkw, t0; + + t = ata_timing_find_mode(mode); + cycletime = max_t(int, t->cycle, min_cycle); + + /* DMA Data Setup */ + t0 = DIV_ROUND_UP(cycletime, ideclk_period); + td = DIV_ROUND_UP(t->active, ideclk_period); + tkw = t0 - td - 1; + td--; + + val32 = ioread32(base + BK3710_DMASTB) & (0xFF << (dev ? 0 : 8)); + val32 |= td << (dev ? 8 : 0); + iowrite32(val32, base + BK3710_DMASTB); + + val32 = ioread32(base + BK3710_DMARCVR) & (0xFF << (dev ? 0 : 8)); + val32 |= tkw << (dev ? 8 : 0); + iowrite32(val32, base + BK3710_DMARCVR); + + /* Disable UDMA for Device */ + val16 = ioread16(base + BK3710_UDMACTL) & ~(1 << dev); + iowrite16(val16, base + BK3710_UDMACTL); +} + +static void pata_bk3710_set_dmamode(struct ata_port *ap, + struct ata_device *adev) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.bmdma_addr; + int is_slave = adev->devno; + const u8 xferspeed = adev->dma_mode; + + if (xferspeed >= XFER_UDMA_0) + pata_bk3710_setudmamode(base, is_slave, + xferspeed - XFER_UDMA_0); + else + pata_bk3710_setmwdmamode(base, is_slave, + adev->id[ATA_ID_EIDE_DMA_MIN], + xferspeed); +} + +static void pata_bk3710_setpiomode(void __iomem *base, struct ata_device *pair, + unsigned int dev, unsigned int cycletime, + unsigned int mode) +{ + const struct ata_timing *t; + u32 val32; + u8 t2, t2i, t0; + + t = ata_timing_find_mode(XFER_PIO_0 + mode); + + /* PIO Data Setup */ + t0 = DIV_ROUND_UP(cycletime, ideclk_period); + t2 = DIV_ROUND_UP(t->active, ideclk_period); + + t2i = t0 - t2 - 1; + t2--; + + val32 = ioread32(base + BK3710_DATSTB) & (0xFF << (dev ? 0 : 8)); + val32 |= t2 << (dev ? 8 : 0); + iowrite32(val32, base + BK3710_DATSTB); + + val32 = ioread32(base + BK3710_DATRCVR) & (0xFF << (dev ? 0 : 8)); + val32 |= t2i << (dev ? 8 : 0); + iowrite32(val32, base + BK3710_DATRCVR); + + /* FIXME: this is broken also in the old driver */ + if (pair) { + u8 mode2 = pair->pio_mode - XFER_PIO_0; + + if (mode2 < mode) + mode = mode2; + } + + /* TASKFILE Setup */ + t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period); + t2 = DIV_ROUND_UP(t->act8b, ideclk_period); + + t2i = t0 - t2 - 1; + t2--; + + val32 = ioread32(base + BK3710_REGSTB) & (0xFF << (dev ? 0 : 8)); + val32 |= t2 << (dev ? 8 : 0); + iowrite32(val32, base + BK3710_REGSTB); + + val32 = ioread32(base + BK3710_REGRCVR) & (0xFF << (dev ? 0 : 8)); + val32 |= t2i << (dev ? 8 : 0); + iowrite32(val32, base + BK3710_REGRCVR); +} + +static void pata_bk3710_set_piomode(struct ata_port *ap, + struct ata_device *adev) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.bmdma_addr; + struct ata_device *pair = ata_dev_pair(adev); + const struct ata_timing *t = ata_timing_find_mode(adev->pio_mode); + const u16 *id = adev->id; + unsigned int cycle_time = 0; + int is_slave = adev->devno; + const u8 pio = adev->pio_mode - XFER_PIO_0; + + if (id[ATA_ID_FIELD_VALID] & 2) { + if (ata_id_has_iordy(id)) + cycle_time = id[ATA_ID_EIDE_PIO_IORDY]; + else + cycle_time = id[ATA_ID_EIDE_PIO]; + + /* conservative "downgrade" for all pre-ATA2 drives */ + if (pio < 3 && cycle_time < t->cycle) + cycle_time = 0; /* use standard timing */ + } + + if (!cycle_time) + cycle_time = t->cycle; + + pata_bk3710_setpiomode(base, pair, is_slave, cycle_time, pio); +} + +static void pata_bk3710_chipinit(void __iomem *base) +{ + /* + * REVISIT: the ATA reset signal needs to be managed through a + * GPIO, which means it should come from platform_data. Until + * we get and use such information, we have to trust that things + * have been reset before we get here. + */ + + /* + * Program the IDETIMP Register Value based on the following assumptions + * + * (ATA_IDETIMP_IDEEN , ENABLE ) | + * (ATA_IDETIMP_PREPOST1 , DISABLE) | + * (ATA_IDETIMP_PREPOST0 , DISABLE) | + * + * DM6446 silicon rev 2.1 and earlier have no observed net benefit + * from enabling prefetch/postwrite. + */ + iowrite16(BIT(15), base + BK3710_IDETIMP); + + /* + * UDMACTL Ultra-ATA DMA Control + * (ATA_UDMACTL_UDMAP1 , 0 ) | + * (ATA_UDMACTL_UDMAP0 , 0 ) + * + */ + iowrite16(0, base + BK3710_UDMACTL); + + /* + * MISCCTL Miscellaneous Conrol Register + * (ATA_MISCCTL_HWNHLD1P , 1 cycle) + * (ATA_MISCCTL_HWNHLD0P , 1 cycle) + * (ATA_MISCCTL_TIMORIDE , 1) + */ + iowrite32(0x001, base + BK3710_MISCCTL); + + /* + * IORDYTMP IORDY Timer for Primary Register + * (ATA_IORDYTMP_IORDYTMP , 0xffff ) + */ + iowrite32(0xFFFF, base + BK3710_IORDYTMP); + + /* + * Configure BMISP Register + * (ATA_BMISP_DMAEN1 , DISABLE ) | + * (ATA_BMISP_DMAEN0 , DISABLE ) | + * (ATA_BMISP_IORDYINT , CLEAR) | + * (ATA_BMISP_INTRSTAT , CLEAR) | + * (ATA_BMISP_DMAERROR , CLEAR) + */ + iowrite16(0, base + BK3710_BMISP); + + pata_bk3710_setpiomode(base, NULL, 0, 600, 0); + pata_bk3710_setpiomode(base, NULL, 1, 600, 0); +} + +static struct ata_port_operations pata_bk3710_ports_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = ata_cable_80wire, + + .set_piomode = pata_bk3710_set_piomode, + .set_dmamode = pata_bk3710_set_dmamode, +}; + +static int __init pata_bk3710_probe(struct platform_device *pdev) +{ + struct clk *clk; + struct resource *mem; + struct ata_host *host; + struct ata_port *ap; + void __iomem *base; + unsigned long rate; + int irq; + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) + return -ENODEV; + + clk_enable(clk); + rate = clk_get_rate(clk); + if (!rate) + return -EINVAL; + + /* NOTE: round *down* to meet minimum timings; we count in clocks */ + ideclk_period = 1000000000UL / rate; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + pr_err(DRV_NAME ": failed to get IRQ resource\n"); + return irq; + } + + base = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(base)) + return PTR_ERR(base); + + /* configure the Palmchip controller */ + pata_bk3710_chipinit(base); + + /* allocate host */ + host = ata_host_alloc(&pdev->dev, 1); + if (!host) + return -ENOMEM; + ap = host->ports[0]; + + ap->ops = &pata_bk3710_ports_ops; + ap->pio_mask = ATA_PIO4; + ap->mwdma_mask = ATA_MWDMA2; + ap->udma_mask = rate < 100000000 ? ATA_UDMA4 : ATA_UDMA5; + ap->flags |= ATA_FLAG_SLAVE_POSS; + + ap->ioaddr.data_addr = base + BK3710_TF_OFFSET; + ap->ioaddr.error_addr = base + BK3710_TF_OFFSET + 1; + ap->ioaddr.feature_addr = base + BK3710_TF_OFFSET + 1; + ap->ioaddr.nsect_addr = base + BK3710_TF_OFFSET + 2; + ap->ioaddr.lbal_addr = base + BK3710_TF_OFFSET + 3; + ap->ioaddr.lbam_addr = base + BK3710_TF_OFFSET + 4; + ap->ioaddr.lbah_addr = base + BK3710_TF_OFFSET + 5; + ap->ioaddr.device_addr = base + BK3710_TF_OFFSET + 6; + ap->ioaddr.status_addr = base + BK3710_TF_OFFSET + 7; + ap->ioaddr.command_addr = base + BK3710_TF_OFFSET + 7; + + ap->ioaddr.altstatus_addr = base + BK3710_CTL_OFFSET; + ap->ioaddr.ctl_addr = base + BK3710_CTL_OFFSET; + + ap->ioaddr.bmdma_addr = base; + + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", + (unsigned long)base + BK3710_TF_OFFSET, + (unsigned long)base + BK3710_CTL_OFFSET); + + /* activate */ + return ata_host_activate(host, irq, ata_sff_interrupt, 0, + &pata_bk3710_sht); +} + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:palm_bk3710"); + +static struct platform_driver pata_bk3710_driver = { + .driver = { + .name = "palm_bk3710", + }, +}; + +static int __init pata_bk3710_init(void) +{ + return platform_driver_probe(&pata_bk3710_driver, pata_bk3710_probe); +} + +module_init(pata_bk3710_init); +MODULE_LICENSE("GPL"); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
