Linux IDE
[Prev Page][Next Page]
- Re: [PATCH] ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1, (continued)
- [PATCH] ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340,
Niklas Cassel
- [DO NOT MERGE v8 00/36] Device Tree support for SH7751 based board,
Yoshinori Sato
- [DO NOT MERGE v8 05/36] sh: GENERIC_IRQ_CHIP support for CONFIG_OF=y,
Yoshinori Sato
- [DO NOT MERGE v8 06/36] sh: kernel/setup Update DT support.,
Yoshinori Sato
- [DO NOT MERGE v8 07/36] sh: Fix COMMON_CLK support in CONFIG_OF=y.,
Yoshinori Sato
- [DO NOT MERGE v8 08/36] clocksource: sh_tmu: CLOCKSOURCE support.,
Yoshinori Sato
- [DO NOT MERGE v8 09/36] dt-binding: Add compatible SH7750 SoC,
Yoshinori Sato
- [DO NOT MERGE v8 10/36] sh: Common PCI Framework driver support.,
Yoshinori Sato
- [DO NOT MERGE v8 11/36] pci: pci-sh7751: Add SH7751 PCI driver,
Yoshinori Sato
- [DO NOT MERGE v8 12/36] dt-bindings: pci: pci-sh7751: Add SH7751 PCI,
Yoshinori Sato
- [DO NOT MERGE v8 13/36] dt-bindings: clock: sh7750-cpg: Add renesas,sh7750-cpg header.,
Yoshinori Sato
- [DO NOT MERGE v8 14/36] clk: Compatible with narrow registers,
Yoshinori Sato
- [DO NOT MERGE v8 15/36] clk: renesas: Add SH7750/7751 CPG Driver,
Yoshinori Sato
- [DO NOT MERGE v8 16/36] irqchip: Add SH7751 INTC driver,
Yoshinori Sato
- [DO NOT MERGE v8 17/36] dt-bindings: interrupt-controller: renesas,sh7751-intc: Add json-schema,
Yoshinori Sato
- [DO NOT MERGE v8 18/36] irqchip: SH7751 external interrupt encoder with enable gate.,
Yoshinori Sato
- [DO NOT MERGE v8 19/36] dt-bindings: interrupt-controller: renesas,sh7751-irl-ext: Add json-schema,
Yoshinori Sato
- [DO NOT MERGE v8 20/36] serial: sh-sci: fix SH4 OF support.,
Yoshinori Sato
- [DO NOT MERGE v8 21/36] dt-bindings: serial: renesas,scif: Add scif-sh7751.,
Yoshinori Sato
- [DO NOT MERGE v8 22/36] dt-bindings: display: smi,sm501: SMI SM501 binding json-schema,
Yoshinori Sato
- [DO NOT MERGE v8 23/36] mfd: sm501: Convert platform_data to OF property,
Yoshinori Sato
- [DO NOT MERGE v8 24/36] dt-binding: sh: cpus: Add SH CPUs json-schema,
Yoshinori Sato
- [DO NOT MERGE v8 25/36] dt-bindings: vendor-prefixes: Add iodata,
Yoshinori Sato
- [DO NOT MERGE v8 26/36] dt-bindings: ata: ata-generic: Add new targets,
Yoshinori Sato
- [DO NOT MERGE v8 27/36] dt-bindings: soc: renesas: sh: Add SH7751 based target,
Yoshinori Sato
- [DO NOT MERGE v8 28/36] sh: SH7751R SoC Internal peripheral definition dtsi.,
Yoshinori Sato
- [DO NOT MERGE v8 29/36] sh: add RTS7751R2D Plus DTS,
Yoshinori Sato
- [DO NOT MERGE v8 30/36] sh: Add IO DATA LANDISK dts,
Yoshinori Sato
- [DO NOT MERGE v8 31/36] sh: Add IO DATA USL-5P dts,
Yoshinori Sato
- [DO NOT MERGE v8 32/36] sh: j2_mimas_v2.dts update,
Yoshinori Sato
- [DO NOT MERGE v8 33/36] sh: Add dtbs target support.,
Yoshinori Sato
- [DO NOT MERGE v8 34/36] sh: RTS7751R2D Plus OF defconfig,
Yoshinori Sato
- [DO NOT MERGE v8 35/36] sh: LANDISK OF defconfig,
Yoshinori Sato
- [DO NOT MERGE v8 36/36] sh: j2_defconfig: update,
Yoshinori Sato
- [DO NOT MERGE v8 03/36] sh: Enable OF support for build and configuration.,
Yoshinori Sato
- [DO NOT MERGE v8 01/36] sh: passing FDT address to kernel startup.,
Yoshinori Sato
- [DO NOT MERGE v8 04/36] dt-bindings: interrupt-controller: Add header for Renesas SH3/4 INTC.,
Yoshinori Sato
- [DO NOT MERGE v8 02/36] sh: Kconfig unified OF supported targets.,
Yoshinori Sato
- Re: [DO NOT MERGE v8 00/36] Device Tree support for SH7751 based board,
Bjorn Helgaas
- Re: [REGRESSION][BISECTED] Scheduling errors with the AMD FX 8300 CPU,
Thomas Gleixner
- AHCI hotplug no longer functions on ICH7,
Tasos Sahanidis
- [PATCH] ata: ahci: Revert "ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list",
dev
- [GIT PULL] ata changes for 6.10-rc1,
Damien Le Moal
- [PATCH v14 00/28] DEPT(Dependency Tracker),
Byungchul Park
- [PATCH v14 27/28] dept: Add documentation for Dept,
Byungchul Park
- [PATCH v14 01/28] llist: Move llist_{head,node} definition to types.h,
Byungchul Park
- [PATCH v14 18/28] dept: Apply timeout consideration to swait,
Byungchul Park
- [PATCH v14 04/28] dept: Add lock dependency tracker APIs,
Byungchul Park
- [PATCH v14 11/28] dept: Apply sdt_might_sleep_{start,end}() to wait_for_completion()/complete(),
Byungchul Park
- [PATCH v14 17/28] dept: Apply timeout consideration to wait_for_completion()/complete(),
Byungchul Park
- [PATCH v14 10/28] dept: Record the latest one out of consecutive waits of the same class,
Byungchul Park
- [PATCH v14 25/28] cpu/hotplug: Use a weaker annotation in AP thread,
Byungchul Park
- [PATCH v14 28/28] dept: Add documentation for Dept's APIs,
Byungchul Park
- [PATCH v14 09/28] dept: Add a mechanism to refill the internal memory pools on running out,
Byungchul Park
- [PATCH v14 15/28] dept: Apply sdt_might_sleep_{start,end}() to dma fence wait,
Byungchul Park
- [PATCH v14 20/28] dept: Apply timeout consideration to hashed-waitqueue wait,
Byungchul Park
- [PATCH v14 21/28] dept: Apply timeout consideration to dma fence wait,
Byungchul Park
- [PATCH v14 14/28] dept: Apply sdt_might_sleep_{start,end}() to hashed-waitqueue wait,
Byungchul Park
- [PATCH v14 13/28] dept: Apply sdt_might_sleep_{start,end}() to waitqueue wait,
Byungchul Park
- [PATCH v14 26/28] fs/jbd2: Use a weaker annotation in journal handling,
Byungchul Park
- [PATCH v14 08/28] dept: Distinguish each work from another,
Byungchul Park
- [PATCH v14 05/28] dept: Tie to Lockdep and IRQ tracing,
Byungchul Park
- [PATCH v14 07/28] dept: Distinguish each syscall context from another,
Byungchul Park
- [PATCH v14 24/28] dept: Print event context requestor's stacktrace on report,
Byungchul Park
- [PATCH v14 06/28] dept: Add proc knobs to show stats and dependency graph,
Byungchul Park
- [PATCH v14 03/28] dept: Add single event dependency tracker APIs,
Byungchul Park
- [PATCH v14 19/28] dept: Apply timeout consideration to waitqueue wait,
Byungchul Park
- [PATCH v14 16/28] dept: Track timeout waits separately with a new Kconfig,
Byungchul Park
- [PATCH v14 23/28] dept: Track PG_locked with dept,
Byungchul Park
- [PATCH v14 22/28] dept: Make Dept able to work with an external wgen,
Byungchul Park
- [PATCH v14 12/28] dept: Apply sdt_might_sleep_{start,end}() to swait,
Byungchul Park
- [PATCH v14 02/28] dept: Implement Dept(Dependency Tracker),
Byungchul Park
- "ata: libata: move ata_{port,link,dev}_dbg to standard pr_XXX() macros" - 742bef476ca5352b16063161fb73a56629a6d995 changed logging behavior and disabled a number of messages,
Krzysztof Olędzki
- [PATCH] ata: pata_legacy: make legacy_exit() work again,
Sergey Shtylyov
- [PATCH] ata: Kconfig: Update SATA_MOBILE_LPM_POLICY default to med_power_with_dipm,
Niklas Cassel
- [LSF/MM/BPF TOPIC] Running BOF,
Matthew Wilcox
- [PATCH AUTOSEL 4.19 3/4] ata: sata_gemini: Check clk_enable() result,
Sasha Levin
- [PATCH AUTOSEL 5.4 3/4] ata: sata_gemini: Check clk_enable() result,
Sasha Levin
- [PATCH AUTOSEL 5.10 3/4] ata: sata_gemini: Check clk_enable() result,
Sasha Levin
- [PATCH AUTOSEL 5.15 3/4] ata: sata_gemini: Check clk_enable() result,
Sasha Levin
- [PATCH AUTOSEL 6.1 5/6] ata: sata_gemini: Check clk_enable() result,
Sasha Levin
- [PATCH AUTOSEL 6.6 11/12] ata: sata_gemini: Check clk_enable() result,
Sasha Levin
- [PATCH AUTOSEL 6.8 14/15] ata: sata_gemini: Check clk_enable() result,
Sasha Levin
- [GIT PULL] ata fixes for 6.9-rc4,
Damien Le Moal
- [PATCH] ata: Add sdev attribute to lower link speed in runtime,
Gustav Ekelund
- [PATCH v2] ata: libata-core: Remove ata_exec_internal_sg(),
Damien Le Moal
- [PATCH] ata: libata-scsi: Fix ata_scsi_port_error_handler() error path,
Damien Le Moal
- [PATCH] ata: libata-core: Allow command duration limits detection for ACS-4 drives,
Igor Pylypiv
- [bug report] scsi: sd: Fix TCG OPAL unlock on system resume,
Dan Carpenter
- [PATCH v2 5.10/5.15] ata: libata-scsi: check cdb length for VARIABLE_LENGTH_CMD commands,
Mikhail Ukhin
- [PATCH] ata: libata-core: Remove ata_exec_internal_sg(),
Damien Le Moal
- convert SCSI to atomic queue limits, part 1 (v3),
Christoph Hellwig
- [PATCH 03/23] mpi3mr: pass queue_limits to bsg_setup_queue,
Christoph Hellwig
- [PATCH 01/23] block: add a helper to cancel atomic queue limit updates,
Christoph Hellwig
- [PATCH 02/23] bsg: pass queue_limits to bsg_setup_queue,
Christoph Hellwig
- [PATCH 04/23] scsi: initialize scsi midlayer limits before allocating the queue,
Christoph Hellwig
- [PATCH 05/23] scsi_transport_fc: add a max_bsg_segments field to struct fc_function_template,
Christoph Hellwig
- [PATCH 06/23] scsi: add a no_highmem flag to struct Scsi_Host,
Christoph Hellwig
- [PATCH 07/23] scsi: add a dma_alignment field to the host and host template,
Christoph Hellwig
- [PATCH 08/23] ufs-exynos: move setting the the dma alignment to the init method,
Christoph Hellwig
- [PATCH 09/23] scsi: use the atomic queue limits API in scsi_add_lun,
Christoph Hellwig
- [PATCH 10/23] scsi: add a device_configure method to the host template,
Christoph Hellwig
- [PATCH 11/23] megaraid_sas: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 12/23] mpt3sas: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 13/23] sbp2: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 14/23] hptiop: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 15/23] ipr: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 16/23] pmcraid: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 17/23] usb-storage: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 18/23] sata_nv: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 19/23] pata_macio: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 20/23] libata: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 21/23] mpi3mr: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 22/23] uas: switch to using ->device_configure to configure queue limits,
Christoph Hellwig
- [PATCH 23/23] block: remove now unused queue limits helpers,
Christoph Hellwig
- Re: convert SCSI to atomic queue limits, part 1 (v3),
Martin K. Petersen
- Re: convert SCSI to atomic queue limits, part 1 (v3),
Martin K. Petersen
- [GIT PULL] ata fixes for 6.9-rc3,
Damien Le Moal
- [PATCH v2] ata: ahci: Add mask_port_map module parameter,
Damien Le Moal
- [PATCH v1 1/1] ata: libata: Move inclusion to where it belongs,
Andy Shevchenko
- [PATCH v1 1/1] ata: ahci_platform: Don't use "proxy" headers,
Andy Shevchenko
- [PATCH] ata: ahci: Add mask_port_map module parameter,
Damien Le Moal
- [PATCH 0/1] ata: Handle HAS_IOPORT dependencies,
Niklas Schnelle
- [RESEND v7 37/37] sh: j2_defconfig: update,
Yoshinori Sato
- [RESEND v7 36/37] sh: LANDISK OF defconfig,
Yoshinori Sato
- [RESEND v7 35/37] sh: RTS7751R2D Plus OF defconfig,
Yoshinori Sato
- [RESEND v7 34/37] sh: Add dtbs target support.,
Yoshinori Sato
- [RESEND v7 33/37] sh: j2_mimas_v2.dts update,
Yoshinori Sato
- [RESEND v7 32/37] sh: Add IO DATA USL-5P dts,
Yoshinori Sato
- [RESEND v7 31/37] sh: Add IO DATA LANDISK dts,
Yoshinori Sato
- [RESEND v7 30/37] sh: add RTS7751R2D Plus DTS,
Yoshinori Sato
- [RESEND v7 29/37] sh: SH7751R SoC Internal peripheral definition dtsi.,
Yoshinori Sato
- [RESEND v7 28/37] dt-bindings: soc: renesas: sh: Add SH7751 based target,
Yoshinori Sato
- [RESEND v7 27/37] dt-bindings: ata: ata-generic: Add new targets,
Yoshinori Sato
- [RESEND v7 26/37] dt-bindings: vendor-prefixes: Add iodata,
Yoshinori Sato
- [RESEND v7 25/37] dt-binding: sh: cpus: Add SH CPUs json-schema,
Yoshinori Sato
- [RESEND v7 24/37] mfd: sm501: Convert platform_data to OF property,
Yoshinori Sato
- [RESEND v7 23/37] dt-bindings: display: sm501 register definition helper,
Yoshinori Sato
- [RESEND v7 22/37] dt-bindings: display: smi,sm501: SMI SM501 binding json-schema,
Yoshinori Sato
- [RESEND v7 21/37] dt-bindings: serial: renesas,scif: Add scif-sh7751.,
Yoshinori Sato
- [RESEND v7 20/37] serial: sh-sci: fix SH4 OF support.,
Yoshinori Sato
- [RESEND v7 19/37] dt-bindings: interrupt-controller: renesas,sh7751-irl-ext: Add json-schema,
Yoshinori Sato
- [RESEND v7 18/37] irqchip: SH7751 external interrupt encoder with enable gate.,
Yoshinori Sato
- [RESEND v7 17/37] dt-bindings: interrupt-controller: renesas,sh7751-intc: Add json-schema,
Yoshinori Sato
- [RESEND v7 16/37] irqchip: Add SH7751 INTC driver,
Yoshinori Sato
- [RESEND v7 15/37] clk: renesas: Add SH7750/7751 CPG Driver,
Yoshinori Sato
- [RESEND v7 14/37] clk: Compatible with narrow registers,
Yoshinori Sato
- [RESEND v7 13/37] dt-bindings: clock: sh7750-cpg: Add renesas,sh7750-cpg header.,
Yoshinori Sato
- [RESEND v7 12/37] dt-bindings: pci: pci-sh7751: Add SH7751 PCI,
Yoshinori Sato
- [RESEND v7 11/37] pci: pci-sh7751: Add SH7751 PCI driver,
Yoshinori Sato
- [RESEND v7 10/37] sh: Common PCI Framework driver support.,
Yoshinori Sato
- [RESEND v7 09/37] dt-binding: Add compatible SH7750 SoC,
Yoshinori Sato
- [RESEND v7 08/37] clocksource: sh_tmu: CLOCKSOURCE support.,
Yoshinori Sato
- [RESEND v7 07/37] sh: Fix COMMON_CLK support in CONFIG_OF=y.,
Yoshinori Sato
- [RESEND v7 06/37] sh: kernel/setup Update DT support.,
Yoshinori Sato
- [RESEND v7 05/37] sh: GENERIC_IRQ_CHIP support for CONFIG_OF=y,
Yoshinori Sato
- [RESEND v7 04/37] dt-bindings: interrupt-controller: Add header for Renesas SH3/4 INTC.,
Yoshinori Sato
- [RESEND v7 03/37] sh: Enable OF support for build and configuration.,
Yoshinori Sato
- [RESEND v7 02/37] sh: Kconfig unified OF supported targets.,
Yoshinori Sato
- [RESEND v7 01/37] sh: passing FDT address to kernel startup.,
Yoshinori Sato
- [PATCH v7 00/37] Device Tree support for SH7751 based board,
Yoshinori Sato
- [PATCH v7 05/37] sh: GENERIC_IRQ_CHIP support for CONFIG_OF=y,
Yoshinori Sato
- [PATCH v7 06/37] sh: kernel/setup Update DT support.,
Yoshinori Sato
- [PATCH v7 07/37] sh: Fix COMMON_CLK support in CONFIG_OF=y.,
Yoshinori Sato
- [PATCH v7 08/37] clocksource: sh_tmu: CLOCKSOURCE support.,
Yoshinori Sato
- [PATCH v7 09/37] dt-binding: Add compatible SH7750 SoC,
Yoshinori Sato
- [PATCH v7 10/37] sh: Common PCI Framework driver support.,
Yoshinori Sato
- [PATCH v7 11/37] pci: pci-sh7751: Add SH7751 PCI driver,
Yoshinori Sato
- [PATCH v7 12/37] dt-bindings: pci: pci-sh7751: Add SH7751 PCI,
Yoshinori Sato
- [PATCH v7 13/37] dt-bindings: clock: sh7750-cpg: Add renesas,sh7750-cpg header.,
Yoshinori Sato
- [PATCH v7 14/37] clk: Compatible with narrow registers,
Yoshinori Sato
- [PATCH v7 15/37] clk: renesas: Add SH7750/7751 CPG Driver,
Yoshinori Sato
- [PATCH v7 16/37] irqchip: Add SH7751 INTC driver,
Yoshinori Sato
- [PATCH v7 17/37] dt-bindings: interrupt-controller: renesas,sh7751-intc: Add json-schema,
Yoshinori Sato
- [PATCH v7 18/37] irqchip: SH7751 external interrupt encoder with enable gate.,
Yoshinori Sato
- [PATCH v7 19/37] dt-bindings: interrupt-controller: renesas,sh7751-irl-ext: Add json-schema,
Yoshinori Sato
- [PATCH v7 20/37] serial: sh-sci: fix SH4 OF support.,
Yoshinori Sato
- [PATCH v7 21/37] dt-bindings: serial: renesas,scif: Add scif-sh7751.,
Yoshinori Sato
- [PATCH v7 22/37] dt-bindings: display: smi,sm501: SMI SM501 binding json-schema,
Yoshinori Sato
- [PATCH v7 23/37] dt-bindings: display: sm501 register definition helper,
Yoshinori Sato
- [PATCH v7 04/37] dt-bindings: interrupt-controller: Add header for Renesas SH3/4 INTC.,
Yoshinori Sato
- [PATCH v7 01/37] sh: passing FDT address to kernel startup.,
Yoshinori Sato
- [PATCH v7 03/37] sh: Enable OF support for build and configuration.,
Yoshinori Sato
- [PATCH v7 02/37] sh: Kconfig unified OF supported targets.,
Yoshinori Sato
- Re: [PATCH v7 00/37] Device Tree support for SH7751 based board,
Niklas Cassel
- Re: [PATCH v7 00/37] Device Tree support for SH7751 based board,
Bjorn Helgaas
- Re: [RESEND v7 00/37] Device Tree support for SH7751 based board,
John Paul Adrian Glaubitz
- [PATCH 00/34] address all -Wunused-const warnings,
Arnd Bergmann
- [PATCH v2] ata: sata_gemini: Add check for clk_enable,
Chen Ni
- [PATCH] ata: sata_gemini: Add check for clk_enable,
Chen Ni
- convert SCSI to atomic queue limits, part 1 (v2),
Christoph Hellwig
- [PATCH 02/23] bsg: pass queue_limits to bsg_setup_queue,
Christoph Hellwig
- [PATCH 01/23] block: add a helper to cancel atomic queue limit updates,
Christoph Hellwig
- [PATCH 03/23] mpi3mr: pass queue_limits to bsg_setup_queue,
Christoph Hellwig
- [PATCH 04/23] scsi: initialize scsi midlayer limits before allocating the queue,
Christoph Hellwig
- [PATCH 05/23] scsi_transport_fc: add a max_bsg_segments field to struct fc_function_template,
Christoph Hellwig
- [PATCH 06/23] scsi: add a no_highmem flag to struct Scsi_Host,
Christoph Hellwig
- [PATCH 07/23] scsi: add a dma_alignment field to the host and host template,
Christoph Hellwig
- [PATCH 08/23] ufs-exynos: move setting the the dma alignment to the init method,
Christoph Hellwig
- [PATCH 09/23] scsi: use the atomic queue limits API in scsi_add_lun,
Christoph Hellwig
- [PATCH 10/23] scsi: add a device_configure method to the host template,
Christoph Hellwig
- [PATCH 11/23] megaraid_sas: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 12/23] mpt3sas: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 13/23] sbp2: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 14/23] hptiop: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 15/23] ipr: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 16/23] pmcraid: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 17/23] usb-storage: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 18/23] sata_nv: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 19/23] pata_macio: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 20/23] libata: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 21/23] mpi3mr: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 22/23] uas: switch to using ->device_configure to configure queue limits,
Christoph Hellwig
- [PATCH 23/23] block: remove now unused queue limits helpers,
Christoph Hellwig
- Re: convert SCSI to atomic queue limits, part 1 (v2),
Martin K. Petersen
- [PATCH] ata: ahci_st: Remove an unused field in struct st_ahci_drv_data,
Christophe JAILLET
- [syzbot] [ide?] WARNING in ata_scsi_queuecmd,
syzbot
- [PATCH 5.10/5.15] ata: libata-scsi: check cdb length for VARIABLE_LENGTH_CMD commands,
Mikhail Ukhin
- [PATCH] ata: pata_macio: drop driver owner assignment,
Krzysztof Kozlowski
- [PATCH v3] dt-bindings: ata: ahci-da850: Convert to dtschema,
Animesh Agarwal
- [PATCH v2] dt-bindings: ata: ahci-da850: Convert to dtschema,
Animesh Agarwal
- [PATCH 00/12] kbuild: enable some -Wextra warnings by default,
Arnd Bergmann
- [PATCH] dt-bindings: ata: ahci-da850: Convert to dtschema,
Animesh Agarwal
- [PATCH v9 00/38] ep93xx device tree conversion,
Nikita Shubin via B4 Relay
- convert SCSI to atomic queue limits, part 1,
Christoph Hellwig
- [PATCH 12/23] mpt3sas: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 14/23] hptiop: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 05/23] scsi_transport_fc: add a max_bsg_segments field to struct fc_function_template,
Christoph Hellwig
- [PATCH 15/23] ipr: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 10/23] scsi: add a device_configure method to the host template,
Christoph Hellwig
- [PATCH 23/23] block: remove now unused queue limits helpers,
Christoph Hellwig
- [PATCH 21/23] mpi3mr: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 22/23] uas: switch to using ->device_configure to configure queue limits,
Christoph Hellwig
- [PATCH 18/23] sata_nv: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 20/23] libata: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 16/23] pmcraid: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 02/23] bsg: pass queue_limits to bsg_setup_queue,
Christoph Hellwig
- [PATCH 04/23] scsi: initialize scsi midlayer limits before allocating the queue,
Christoph Hellwig
- [PATCH 06/23] scsi: add a no_highmem flag to struct Scsi_Host,
Christoph Hellwig
- [PATCH 01/23] block: don't reject too large max_user_setors in blk_validate_limits,
Christoph Hellwig
- [PATCH 07/23] scsi: add a dma_alignment field to the host and host template,
Christoph Hellwig
- [PATCH 11/23] megaraid_sas: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 08/23] ufs-exynos: move setting the the dma alignment to the init method,
Christoph Hellwig
- [PATCH 09/23] scsi: use the atomic queue limits API in scsi_add_lun,
Christoph Hellwig
- [PATCH 13/23] sbp2: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 17/23] usb-storage: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 19/23] pata_macio: switch to using ->device_configure,
Christoph Hellwig
- [PATCH 03/23] mpi3mr: pass queue_limits to bsg_setup_queue,
Christoph Hellwig
- [PATCH 0/2] PCI: Remove pci_enable_device_io(),
Heiner Kallweit
- [PATCH 5.10/5.15] scsi: add a length check for VARIABLE_LENGTH_CMD commands,
Mikhail Ukhin
- [PATCH] ata: ahci_ceva: return of_property_read_u8_array() error code,
Radhey Shyam Pandey
- [PATCH v8] dt-bindings: ata: imx-pata: Convert to dtschema,
Animesh Agarwal
- [GIT PULL] ata fixes for 6.9-rc1,
Niklas Cassel
- [PATCH] scsi: sd: Fix TCG OPAL unlock on system resume,
Damien Le Moal
- ASMedia PMP inquiry,
Niklas Cassel
- [PATCH v2] libata-sata: Check SDB_FIS for completion of DMA transfer before completing the commands.,
Saurav Kashyap
- [PATCH] ahci: asm1064: asm1166: don't limit reported ports,
Conrad Kostecki
- Re: ASMedia ASM1166/ASM1064 port restrictions will break cards with port-multipliers,
Andrey Melnikov
<Possible follow-ups>
Re: ASMedia ASM1166/ASM1064 port restrictions will break cards with port-multipliers,
Ioannis Barkas
[PATCH v7] dt-bindings: imx-pata: Convert to dtschema,
Animesh Agarwal
[REGRESSION] Bug 218538 - 3cc2ffe5c16d from 6.6 breaks S3 resume on SATA SSD OPAL,
Thorsten Leemhuis
[GIT PULL] ata changes for 6.9-rc1,
Niklas Cassel
[PATCH v6] dt-bindings: imx-pata: Convert to dtschema,
Animesh Agarwal
[PATCH v5] dt-bindings: imx-pata: Convert to dtschema,
Animesh Agarwal
[PATCH v4] dt-bindings: imx-pata: Convert to dtschema,
Animesh Agarwal
[PATCH v3] dt-bindings: imx-pata: Convert to dtschema,
Animesh Agarwal
[PATCH v8 0/7] NCQ Priority sysfs sttributes for libsas,
Igor Pylypiv
[PATCH v13 00/27] DEPT(Dependency Tracker),
Byungchul Park
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]