Re: [RESEND v7 14/37] clk: Compatible with narrow registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sato-san,

On Thu, Apr 4, 2024 at 7:15 AM Yoshinori Sato
<ysato@xxxxxxxxxxxxxxxxxxxx> wrote:
> divider and gate only support 32-bit registers.
> Older hardware uses narrower registers, so I want to be able to handle
> 8-bit and 16-bit wide registers.
>
> Seven clk_divider flags are used, and if I add flags for 8bit access and
> 16bit access, 8bit will not be enough, so I expanded it to u16.
>
> Signed-off-by: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>

Thanks for the update!

> --- a/drivers/clk/clk-divider.c
> +++ b/drivers/clk/clk-divider.c
> @@ -26,20 +26,38 @@
>   * parent - fixed parent.  No clk_set_parent support
>   */
>
> -static inline u32 clk_div_readl(struct clk_divider *divider)
> -{
> -       if (divider->flags & CLK_DIVIDER_BIG_ENDIAN)
> -               return ioread32be(divider->reg);
> -
> -       return readl(divider->reg);
> +static inline u32 clk_div_read(struct clk_divider *divider)
> +{
> +       if (divider->flags & CLK_DIVIDER_REG_8BIT)

When you need curly braces in one branch of an if/else statement,
please use curly braces in all branches (everywhere).

> +               return readb(divider->reg);
> +       else if (divider->flags & CLK_DIVIDER_REG_16BIT) {
> +               if (divider->flags & CLK_DIVIDER_BIG_ENDIAN)
> +                       return ioread16be(divider->reg);
> +               else
> +                       return readw(divider->reg);
> +       } else {
> +               if (divider->flags & CLK_DIVIDER_BIG_ENDIAN)
> +                       return ioread32be(divider->reg);
> +               else
> +                       return readl(divider->reg);
> +       }
>  }

> --- a/drivers/clk/clk-gate.c
> +++ b/drivers/clk/clk-gate.c

> @@ -137,12 +155,30 @@ struct clk_hw *__clk_hw_register_gate(struct device *dev,
>         struct clk_init_data init = {};
>         int ret = -EINVAL;
>
> +       /* validate register size option and bit_idx */
>         if (clk_gate_flags & CLK_GATE_HIWORD_MASK) {
>                 if (bit_idx > 15) {
>                         pr_err("gate bit exceeds LOWORD field\n");
>                         return ERR_PTR(-EINVAL);
>                 }
>         }
> +       if (clk_gate_flags & CLK_GATE_REG_16BIT) {
> +               if (bit_idx > 15) {
> +                       pr_err("gate bit exceeds 16 bits\n");
> +                       return ERR_PTR(-EINVAL);
> +               }
> +       }
> +       if (clk_gate_flags & CLK_GATE_REG_8BIT) {
> +               if (bit_idx > 7) {
> +                       pr_err("gate bit exceeds 8 bits\n");
> +                       return ERR_PTR(-EINVAL);
> +               }
> +       }
> +       if ((clk_gate_flags & CLK_GATE_HIWORD_MASK) &&

If you use parentheses around "a & b" here...

> +           clk_gate_flags & (CLK_GATE_REG_8BIT | CLK_GATE_REG_16BIT)) {

please add parentheses here, too.

> +               pr_err("HIWORD_MASK required 32-bit register\n");
> +               return ERR_PTR(-EINVAL);
> +       }
>
>         /* allocate the gate */
>         gate = kzalloc(sizeof(*gate), GFP_KERNEL);
> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index 4a537260f655..eaa6ff1d0b2e 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -508,12 +508,16 @@ void of_fixed_clk_setup(struct device_node *np);
>   * CLK_GATE_BIG_ENDIAN - by default little endian register accesses are used for
>   *     the gate register.  Setting this flag makes the register accesses big
>   *     endian.
> + * CLK_GATE_REG_8BIT - by default 32bit register accesses are used for
> + *     the gate register.  Setting this flag makes the register accesses 8bit.
> + * CLK_GATE_REG_16BIT - by default 32bit register accesses are used for
> + *     the gate register.  Setting this flag makes the register accesses 16bit.
>   */
>  struct clk_gate {
>         struct clk_hw hw;
>         void __iomem    *reg;
>         u8              bit_idx;
> -       u8              flags;
> +       u32             flags;

(from my comments on v6)
There is no need to increase the size of the flags field for the gate clock.


>         spinlock_t      *lock;
>  };
>

> @@ -675,13 +681,17 @@ struct clk_div_table {
>   * CLK_DIVIDER_BIG_ENDIAN - By default little endian register accesses are used
>   *     for the divider register.  Setting this flag makes the register accesses
>   *     big endian.
> + * CLK_DIVIDER_REG_8BIT - by default 32bit register accesses are used for
> + *     the gate register.  Setting this flag makes the register accesses 8bit.
> + * CLK_DIVIDER_REG_16BIT - by default 32bit register accesses are used for
> + *     the gate register.  Setting this flag makes the register accesses 16bit.
>   */
>  struct clk_divider {
>         struct clk_hw   hw;
>         void __iomem    *reg;
>         u8              shift;
>         u8              width;
> -       u8              flags;
> +       u16             flags;
>         const struct clk_div_table      *table;
>         spinlock_t      *lock;
>  };

> @@ -726,18 +738,18 @@ struct clk_hw *__clk_hw_register_divider(struct device *dev,
>                 struct device_node *np, const char *name,
>                 const char *parent_name, const struct clk_hw *parent_hw,
>                 const struct clk_parent_data *parent_data, unsigned long flags,
> -               void __iomem *reg, u8 shift, u8 width, u8 clk_divider_flags,
> +               void __iomem *reg, u8 shift, u8 width, u32 clk_divider_flags,

"u16 clk_divider_flags", to match clk_divider.flags.

>                 const struct clk_div_table *table, spinlock_t *lock);
>  struct clk_hw *__devm_clk_hw_register_divider(struct device *dev,
>                 struct device_node *np, const char *name,
>                 const char *parent_name, const struct clk_hw *parent_hw,
>                 const struct clk_parent_data *parent_data, unsigned long flags,
> -               void __iomem *reg, u8 shift, u8 width, u8 clk_divider_flags,
> +               void __iomem *reg, u8 shift, u8 width, u32 clk_divider_flags,

Likewise.

>                 const struct clk_div_table *table, spinlock_t *lock);
>  struct clk *clk_register_divider_table(struct device *dev, const char *name,
>                 const char *parent_name, unsigned long flags,
>                 void __iomem *reg, u8 shift, u8 width,
> -               u8 clk_divider_flags, const struct clk_div_table *table,
> +               u32 clk_divider_flags, const struct clk_div_table *table,

Likewise.

>                 spinlock_t *lock);
>  /**
>   * clk_register_divider - register a divider clock with the clock framework

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds





[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux