Re: [PATCH v4 5/8] ata: libata-scsi: Do not pass ATA device id to ata_to_sense_error()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 01, 2024 at 07:57:55PM +0000, Igor Pylypiv wrote:
> ATA device id is not used in ata_to_sense_error().
> 
> Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
> Reviewed-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
> Signed-off-by: Igor Pylypiv <ipylypiv@xxxxxxxxxx>
> ---
>  drivers/ata/libata-scsi.c | 9 ++++-----
>  1 file changed, 4 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
> index c11ae77d3ca6..92d75780fc3b 100644
> --- a/drivers/ata/libata-scsi.c
> +++ b/drivers/ata/libata-scsi.c
> @@ -785,7 +785,6 @@ static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc)
>  
>  /**
>   *	ata_to_sense_error - convert ATA error to SCSI error
> - *	@id: ATA device number
>   *	@drv_stat: value contained in ATA status register
>   *	@drv_err: value contained in ATA error register
>   *	@sk: the sense key we'll fill out
> @@ -799,8 +798,8 @@ static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc)
>   *	LOCKING:
>   *	spin_lock_irqsave(host lock)
>   */
> -static void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk,
> -			       u8 *asc, u8 *ascq)
> +static void ata_to_sense_error(u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
> +			       u8 *ascq)
>  {
>  	int i;
>  
> @@ -934,7 +933,7 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
>  	 */
>  	if (qc->err_mask ||
>  	    tf->status & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
> -		ata_to_sense_error(qc->ap->print_id, tf->status, tf->error,
> +		ata_to_sense_error(tf->status, tf->error,
>  				   &sense_key, &asc, &ascq);
>  		ata_scsi_set_sense(qc->dev, cmd, sense_key, asc, ascq);
>  	} else {
> @@ -973,7 +972,7 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc)
>  	 */
>  	if (qc->err_mask ||
>  	    tf->status & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
> -		ata_to_sense_error(qc->ap->print_id, tf->status, tf->error,
> +		ata_to_sense_error(tf->status, tf->error,
>  				   &sense_key, &asc, &ascq);
>  		ata_scsi_set_sense(dev, cmd, sense_key, asc, ascq);
>  	} else {
> -- 
> 2.45.2.803.g4e1b14247a-goog
> 

Reviewed-by: Niklas Cassel <cassel@xxxxxxxxxx>




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux