Re: [PATCH v2] ata: libata-scsi: Set the RMB bit only for removable media devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 14, 2024 at 02:23:45PM +0200, Niklas Cassel wrote:
> From: Damien Le Moal <dlemoal@xxxxxxxxxx>
> 
> The SCSI Removable Media Bit (RMB) should only be set for removable media,
> where the device stays and the media changes, e.g. CD-ROM or floppy.
> 
> The ATA removable media device bit is obsoleted since ATA-8 ACS (2006),
> but before that it was used to indicate that the device can have its media
> removed (while the device stays).
> 
> Commit 8a3e33cf92c7 ("ata: ahci: find eSATA ports and flag them as
> removable") introduced a change to set the RMB bit if the port has either
> the eSATA bit or the hot-plug capable bit set. The reasoning was that the
> author wanted his eSATA ports to get treated like a USB stick.
> 
> This is however wrong. See "20-082r23SPC-6: Removable Medium Bit
> Expectations" which has since been integrated to SPC, which states that:
> 
> """
> Reports have been received that some USB Memory Stick device servers set
> the removable medium (RMB) bit to one. The rub comes when the medium is
> actually removed, because... The device server is removed concurrently
> with the medium removal. If there is no device server, then there is no
> device server that is waiting to have removable medium inserted.
> 
> Sufficient numbers of SCSI analysts see such a device:
> - not as a device that supports removable medium;
> but
> - as a removable, hot pluggable device.
> """
> 
> The definition of the RMB bit in the SPC specification has since been
> clarified to match this.
> 
> Thus, a USB stick should not have the RMB bit set (and neither shall an
> eSATA nor a hot-plug capable port).
> 
> Commit dc8b4afc4a04 ("ata: ahci: don't mark HotPlugCapable Ports as
> external/removable") then changed so that the RMB bit is only set for the
> eSATA bit (and not for the hot-plug capable bit), because of a lot of bug
> reports of SATA devices were being automounted by udisks. However,
> treating eSATA and hot-plug capable ports differently is not correct.
> 
> From the AHCI 1.3.1 spec:
> Hot Plug Capable Port (HPCP): When set to '1', indicates that this port's
> signal and power connectors are externally accessible via a joint signal
> and power connector for blindmate device hot plug.
> 
> So a hot-plug capable port is an external port, just like commit
> 45b96d65ec68 ("ata: ahci: a hotplug capable port is an external port")
> claims.
> 
> In order to not violate the SPC specification, modify the SCSI INQUIRY
> data to only set the RMB bit if the ATA device can have its media removed.
> 
> This fixes a reported problem where GNOME/udisks was automounting devices
> connected to hot-plug capable ports.
> 
> Fixes: 45b96d65ec68 ("ata: ahci: a hotplug capable port is an external port")
> Cc: stable@xxxxxxxxxxxxxxx
> Reviewed-by: Mario Limonciello <mario.limonciello@xxxxxxx>
> Reviewed-by: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
> Tested-by: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
> Reported-by: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
> Closes: https://lore.kernel.org/linux-ide/c0de8262-dc4b-4c22-9fac-33432e5bddd3@xxxxxxxx/
> Signed-off-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
> [cassel: wrote commit message]
> Signed-off-by: Niklas Cassel <cassel@xxxxxxxxxx>
> ---
> Changes since v1:
> -Added Cc: stable.
> -Updated comment and commit message to correctly state that the
>  ATA removable media device bit is obsoleted since ATA-8 ACS.
> 
>  drivers/ata/libata-scsi.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
> index cdf29b178ddc..bb4d30d377ae 100644
> --- a/drivers/ata/libata-scsi.c
> +++ b/drivers/ata/libata-scsi.c
> @@ -1831,11 +1831,11 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
>  		2
>  	};
>  
> -	/* set scsi removable (RMB) bit per ata bit, or if the
> -	 * AHCI port says it's external (Hotplug-capable, eSATA).
> +	/*
> +	 * Set the SCSI Removable Media Bit (RMB) if the ATA removable media
> +	 * device bit (obsolete since ATA-8 ACS) is set.
>  	 */
> -	if (ata_id_removable(args->id) ||
> -	    (args->dev->link->ap->pflags & ATA_PFLAG_EXTERNAL))
> +	if (ata_id_removable(args->id))
>  		hdr[1] |= (1 << 7);
>  
>  	if (args->dev->class == ATA_DEV_ZAC) {
> -- 
> 2.45.2
> 

Applied:
https://git.kernel.org/pub/scm/linux/kernel/git/libata/linux.git/log/?h=for-6.10-fixes




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux