[PATCH V5 3/3] dt-bindings: tegra: add binding documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Preetham Chandru R <pchandru@xxxxxxxxxx>

This adds bindings documentation for the
AHCI controller on Tegra210

Signed-off-by: Preetham Chandru R <pchandru@xxxxxxxxxx>
---
v4:
* changed the commit message
* changed 'sata-cold' reset to mandatory for t210 and t124
* Removed the regulators for T210 since these regulators
  will be enabled in phy driver.
v3:
* Add AUX register.
v2:
* change cml1, pll_e and phy regulators as optional
  for T210.
---
 .../bindings/ata/nvidia,tegra124-ahci.txt          | 38 ++++++++++++++--------
 1 file changed, 25 insertions(+), 13 deletions(-)

diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
index 66c83c3..df4dc2c 100644
--- a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
+++ b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
@@ -1,20 +1,19 @@
-Tegra124 SoC SATA AHCI controller
+Tegra SoC SATA AHCI controller
 
 Required properties :
-- compatible : For Tegra124, must contain "nvidia,tegra124-ahci".  Otherwise,
-  must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip>
-  is tegra132.
-- reg : Should contain 2 entries:
+- compatible : Must be one of:
+  - Tegra124 : "nvidia,tegra124-ahci"
+  - Tegra210 : "nvidia,tegra210-ahci"
+- reg : Should contain 3 entries:
   - AHCI register set (SATA BAR5)
   - SATA register set
+  - Tegra210 : AUX register set
 - interrupts : Defines the interrupt used by SATA
 - clocks : Must contain an entry for each entry in clock-names.
   See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
   - sata
   - sata-oob
-  - cml1
-  - pll_e
 - resets : Must contain an entry for each entry in reset-names.
   See ../reset/reset.txt for details.
 - reset-names : Must include the following entries:
@@ -24,9 +23,22 @@ Required properties :
 - phys : Must contain an entry for each entry in phy-names.
   See ../phy/phy-bindings.txt for details.
 - phy-names : Must include the following entries:
-  - sata-phy : XUSB PADCTL SATA PHY
-- hvdd-supply : Defines the SATA HVDD regulator
-- vddio-supply : Defines the SATA VDDIO regulator
-- avdd-supply : Defines the SATA AVDD regulator
-- target-5v-supply : Defines the SATA 5V power regulator
-- target-12v-supply : Defines the SATA 12V power regulator
+  - For T124:
+    - sata-phy : XUSB PADCTL SATA PHY
+  - For T210:
+    - sata-0
+- For T124:
+  - hvdd-supply : Defines the SATA HVDD regulator
+  - vddio-supply : Defines the SATA VDDIO regulator
+  - avdd-supply : Defines the SATA AVDD regulator
+  - target-5v-supply : Defines the SATA 5V power regulator
+  - target-12v-supply : Defines the SATA 12V power regulator
+
+Optional properties:
+- clock-names :
+  - cml1 :
+    cml1 clock is required by phy so it is optional to define
+    here as phy driver will be enabling this clock.
+  - pll_e :
+    pll_e is the parent of cml1 clock so it is optional to define
+    here as phy driver will be enabling this clock.
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux