2017-03-13 22:34 GMT+01:00 Tony Lindgren <tony@xxxxxxxxxxx>: > * Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> [170313 09:45]: >> This board has an external oscillator supplying the reference clock >> signal for SATA. Its rate is fixed at 100Mhz. Add a corresponding >> device tree node. > > Is this the 100MHz clock from PCIe? Just like on dm814x-evm as noted > in the workaround thread below: > > http://e2e.ti.com/support/dsp/davinci_digital_media_processors/f/716/p/181083/671141 > > Regards, > > Tony > Hi Tony, these signals come from a TI CDCM61002 (U30 on the board's schematics). It's hardwired to 100mHZ output. Thanks, Bartosz Golaszewski -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html