RE: [PATCH V3 3/3] arm64: tegra: Enable SATA on Tegra210

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




>-----Original Message-----
>From: Mikko Perttunen [mailto:cyndis@xxxxxxxx]
>Sent: Sunday, May 14, 2017 4:59 PM
>To: Preetham Chandru <pchandru@xxxxxxxxxx>; thierry.reding@xxxxxxxxx;
>tj@xxxxxxxxxx
>Cc: tegra@xxxxxxxxxxxxxxx; linux-ide@xxxxxxxxxxxxxxx; Laxman Dewangan
><ldewangan@xxxxxxxxxx>; preetham260@xxxxxxxxx; Venu Byravarasu
><vbyravarasu@xxxxxxxxxx>; Pavan Kunapuli <pkunapuli@xxxxxxxxxx>; linux-
>tegra@xxxxxxxxxxxxxxx
>Subject: Re: [PATCH V3 3/3] arm64: tegra: Enable SATA on Tegra210
>
>On 05/12/2017 12:56 PM, Preetham Chandru wrote:
>> +CC linux-tegra@xxxxxxxxxxxxxxx
>>
>>> -----Original Message-----
>>> From: Preetham Chandru
>>> Sent: Friday, May 12, 2017 3:04 PM
>>> To: thierry.reding@xxxxxxxxx; tj@xxxxxxxxxx
>>> Cc: tegra@xxxxxxxxxxxxxxx; linux-ide@xxxxxxxxxxxxxxx; Laxman Dewangan
>>> <ldewangan@xxxxxxxxxx>; preetham260@xxxxxxxxx; Venu Byravarasu
>>> <vbyravarasu@xxxxxxxxxx>; Pavan Kunapuli <pkunapuli@xxxxxxxxxx>;
>>> Preetham Chandru <pchandru@xxxxxxxxxx>
>>> Subject: [PATCH V3 3/3] arm64: tegra: Enable SATA on Tegra210
>>>
>>> From: Preetham Chandru R <pchandru@xxxxxxxxxx>
>>>
>>> Enable the SATA unit on Tegra210 systems.
>>>
>>> Signed-off-by: Preetham Chandru R <pchandru@xxxxxxxxxx>
>>> ---
>>> arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi |  6 ++++++
>>> arch/arm64/boot/dts/nvidia/tegra210.dtsi       | 16 ++++++++++++++++
>>> 2 files changed, 22 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>>> b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>>> index e5fc67b..58c28b9 100644
>>> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>>> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>>> @@ -1324,6 +1324,12 @@
>>> 		status = "okay";
>>> 	};
>>>
>>> +	sata@70020000 {
>>> +		status = "okay";
>>> +		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
>>> +		phy-names = "sata-0";
>>> +	};
>>> +
>>> 	padctl@7009f000 {
>>> 		status = "okay";
>>>
>>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>>> b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>>> index 8f26c4d..20c9160 100644
>>> --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>>> +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>>> @@ -795,6 +795,22 @@
>>> 		#iommu-cells = <1>;
>>> 	};
>>>
>>> +	sata@70020000 {
>>> +		compatible = "nvidia,tegra210-ahci";
>>> +		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
>>> +		      <0x0 0x70020000 0x0 0x7000>, /* SATA */
>>> +		      <0x0 0x70001100 0x0 0x1000>; /* SATA AUX*/
>
>Missing space after 'AUX'
>
Okay.

>>> +		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
>>> +		clocks = <&tegra_car TEGRA210_CLK_SATA>,
>>> +			<&tegra_car TEGRA210_CLK_SATA_OOB>;
>>> +		clock-names = "sata", "sata-oob";
>>> +		resets = <&tegra_car 124>,
>>> +			 <&tegra_car 123>,
>>> +			 <&tegra_car 129>;
>>> +		reset-names = "sata", "sata-oob", "sata-cold";
>
>The binding documentation says that sata-cold is not required for tegra210?
>

It's a mistake in binding documentation. Will correct it in binding doc.

>>> +		status = "disabled";
>>> +	};
>>> +
>>> 	hda@70030000 {
>>> 		compatible = "nvidia,tegra210-hda", "nvidia,tegra30-hda";
>>> 		reg = <0x0 0x70030000 0x0 0x10000>;
>>> --
>>> 2.1.4
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-tegra"
>> in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo
>> info at  http://vger.kernel.org/majordomo-info.html
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux