Linux IDE Archive

• Thread Index

• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Linus Walleij
• [PATCH 2/2] PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L
  • From: Hans de Goede
• [PATCH 1/2] ahci: Add PCI-id for the Highpoint Rocketraid 644L card
  • From: Hans de Goede
• [PATCH 0/2] ahci/pci-quirks: Add PCI-id for the Highpoint Rocketraid 644L card
  • From: Hans de Goede
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Linus Walleij
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Pavel Machek
• Re: [PATCH] pata_bk3710: clarify license version and use SPDX header
  • From: Tejun Heo
• Re: [PATCH] pata_falcon: clarify license version and use SPDX header
  • From: Tejun Heo
• Re: [PATCH] scsi: ata: don't reset three times if device is offline for SAS host
  • From: Tejun Heo
• Re: [PATCH v2] ata: do not schedule hot plug if it is a sas host
  • From: Tejun Heo
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Jacek Anaszewski
• Re: [PATCH v2] ata: add Amiga Gayle PATA controller driver
  • From: Geert Uytterhoeven
• Re: [PATCH v2] ata: add Amiga Gayle PATA controller driver
  • From: Andy Shevchenko
• Re: [PATCH] pata_bk3710: clarify license version and use SPDX header
  • From: Sekhar Nori
• Re: [PATCH] pata_falcon: clarify license version and use SPDX header
  • From: Geert Uytterhoeven
• [PATCH] pata_bk3710: clarify license version and use SPDX header
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] pata_falcon: clarify license version and use SPDX header
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v2] ata: add Amiga Gayle PATA controller driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: add Amiga Gayle PATA controller driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: add Amiga Gayle PATA controller driver
  • From: John Paul Adrian Glaubitz
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] scsi: ata: don't reset three times if device is offline for SAS host
  • From: chenxiang (M)
• [PATCH v2] ata: do not schedule hot plug if it is a sas host
  • From: Jason Yan
• Re: [PATCH] ata: do not schedule hot plug if it is a sas host
  • From: Jason Yan
• Re: [PATCH] ata: do not schedule hot plug if it is a sas host
  • From: Tejun Heo
• Re: [PATCH] scsi: ata: don't reset three times if device is offline for SAS host
  • From: Tejun Heo
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Tejun Heo
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Tejun Heo
• RE: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
  • From: Preetham Chandru
• RE: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
  • From: Preetham Chandru
• RE: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
  • From: Preetham Chandru
• RE: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
  • From: Preetham Chandru
• [PATCH] ata: do not schedule hot plug if it is a sas host
  • From: Jason Yan
• Re: [PATCH] scsi: ata: don't reset three times if device is offline for SAS host
  • From: chenxiang (M)
• 4.16-rc2+git: pata_serverworks: hanging ata detection thread on HP DL380G3
  • From: Meelis Roos
• [PATCH] leds: Extends disk trigger for reads and writes
  • From: Linus Walleij
• [PATCH] ata: Prevent null dereference in ata_host_alloc_pinfo
  • From: C0deAi
• Re: [PATCH v2] libata: disable LPM for Crucial BX100 SSD 500GB drive
  • From: Tejun Heo
• Re: [PATCH V7 3/7] ata: ahci_tegra: Update initialization sequence
  • From: Thierry Reding
• Re: [PATCH V7 7/7] ata: ahci_tegra: Add AHCI support for Tegra210
  • From: Thierry Reding
• Re: [PATCH V7 6/7] ata: ahci_tegra: disable DIPM
  • From: Thierry Reding
• Re: [PATCH V7 5/7] ata: ahci_tegra: disable devslp for t124
  • From: Thierry Reding
• Re: [PATCH V7 4/7] ata: ahci_tegra: initialize regulators from soc_data
  • From: Thierry Reding
• Re: [PATCH V7 3/7] ata: ahci_tegra: Update initialization sequence
  • From: Thierry Reding
• Re: [PATCH V7 2/7] arm64: tegra: Enable AHCI on Jetson TX1
  • From: Thierry Reding
• Re: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
  • From: Thierry Reding
• Re: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
  • From: Thierry Reding
• Re: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
  • From: Thierry Reding
• Re: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
  • From: Thierry Reding
• Re: [PATCH 1/3] pata_arasan_cf: Delete an error message for a failed memory allocation in arasan_cf_probe()
  • From: Viresh Kumar
• Re: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
  • From: Rob Herring
• Re: [PATCH] ata: add Amiga Gayle PATA controller driver
  • From: John Paul Adrian Glaubitz
• [PATCH v2] libata: disable LPM for Crucial BX100 SSD 500GB drive
  • From: Kai-Heng Feng
• Re: [PATCH] sata_dwc_460ex: Delete an error message for a failed memory allocation in sata_dwc_port_start()
  • From: Andy Shevchenko
• Re: [PATCH] libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs
  • From: Tejun Heo
• Re: [PATCH 1/2] pata_it821x: Delete an error message for a failed memory allocation in it821x_firmware_command()
  • From: Tejun Heo
• Re: [PATCH 1/3] pata_macio: Delete an error message for a failed memory allocation in two functions
  • From: Tejun Heo
• Re: [PATCH] pata_mpc52xx: Delete an error message for a failed memory allocation in mpc52xx_ata_probe()
  • From: Tejun Heo
• Re: [PATCH] sata_dwc_460ex: Delete an error message for a failed memory allocation in sata_dwc_port_start()
  • From: Tejun Heo
• Re: [PATCH] pata_samsung_cf: Delete an error message for a failed memory allocation in pata_s3c_probe()
  • From: Tejun Heo
• Re: [PATCH 3/3] pata_arasan_cf: Move two variable assignments in arasan_cf_probe()
  • From: Tejun Heo
• Re: [PATCH 2/3] pata_arasan_cf: Delete an unnecessary variable initialisation in arasan_cf_probe()
  • From: Tejun Heo
• Re: [PATCH] libata-scsi: Delete an unnecessary variable in ata_scsi_slave_config()
  • From: Tejun Heo
• [PATCH] libata-scsi: Delete an unnecessary variable in ata_scsi_slave_config()
  • From: SF Markus Elfring
• [PATCH 3/3] pata_arasan_cf: Move two variable assignments in arasan_cf_probe()
  • From: SF Markus Elfring
• [PATCH 2/3] pata_arasan_cf: Delete an unnecessary variable initialisation in arasan_cf_probe()
  • From: SF Markus Elfring
• [PATCH 1/3] pata_arasan_cf: Delete an error message for a failed memory allocation in arasan_cf_probe()
  • From: SF Markus Elfring
• [PATCH 0/3] PATA-Arasan CF: Adjustments for arasan_cf_probe()
  • From: SF Markus Elfring
• Re: libata: disable LPM for Crucial BX100 SSD drives
  • From: Kai-Heng Feng
• [PATCH 2/2] pata_it821x: Use common error handling code in it821x_firmware_command()
  • From: SF Markus Elfring
• [PATCH 1/2] pata_it821x: Delete an error message for a failed memory allocation in it821x_firmware_command()
  • From: SF Markus Elfring
• [PATCH 0/2] PATA-IT821x: Adjustments for it821x_firmware_command()
  • From: SF Markus Elfring
• [PATCH 3/3] pata_macio: Adjust 11 checks for null pointers
  • From: SF Markus Elfring
• [PATCH 2/3] pata_macio: Improve a size determination in two functions
  • From: SF Markus Elfring
• [PATCH 1/3] pata_macio: Delete an error message for a failed memory allocation in two functions
  • From: SF Markus Elfring
• [PATCH 0/3] PATA-MacIO: Adjustments for five function implementations
  • From: SF Markus Elfring
• [PATCH 01/12] drivers: base: Unified device connection lookup
  • From: Hans de Goede
• [PATCH 02/12] usb: typec: Start using ERR_PTR
  • From: Hans de Goede
• [PATCH 04/12] usb: common: Small class for USB role switches
  • From: Hans de Goede
• [PATCH 05/12] usb: typec: tcpm: Set USB role switch to device mode when configured as such
  • From: Hans de Goede
• [PATCH 06/12] usb: typec: tcpm: Use new Type-C switch/mux and usb-role-switch functions
  • From: Hans de Goede
• [PATCH 03/12] usb: typec: API for controlling USB Type-C Multiplexers
  • From: Hans de Goede
• [PATCH 07/12] xhci: Add option to get next extended capability in list by passing id = 0
  • From: Hans de Goede
• [PATCH 10/12] usb: typec: driver for Pericom PI3USB30532 Type-C cross switch
  • From: Hans de Goede
• Re: [PATCH 0/12] USB Type-C device-connection, mux and switch support
  • From: Hans de Goede
• [PATCH 09/12] usb: roles: Add Intel XHCI USB role switch driver
  • From: Hans de Goede
• [PATCH] pata_mpc52xx: Delete an error message for a failed memory allocation in mpc52xx_ata_probe()
  • From: SF Markus Elfring
• [PATCH 11/12] platform/x86: intel_cht_int33fe: Add device connections for the Type-C port
  • From: Hans de Goede
• [PATCH 12/12] extcon: axp288: Set USB role where necessary
  • From: Hans de Goede
• [PATCH 08/12] xhci: Add Intel extended cap / otg phy mux handling
  • From: Hans de Goede
• [PATCH 0/12] USB Type-C device-connection, mux and switch support
  • From: Hans de Goede
• Re: libata: disable LPM for Crucial BX100 SSD drives
  • From: Hans de Goede
• [PATCH] pata_samsung_cf: Delete an error message for a failed memory allocation in pata_s3c_probe()
  • From: SF Markus Elfring
• [PATCH] libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs
  • From: Hans de Goede
• Re: [PATCH] sata_dwc_460ex: Delete an error message for a failed memory allocation in sata_dwc_port_start()
  • From: Andy Shevchenko
• [PATCH] sata_dwc_460ex: Delete an error message for a failed memory allocation in sata_dwc_port_start()
  • From: SF Markus Elfring
• [PATCH] libata: disable LPM for Crucial BX100 SSD drives
  • From: Kai-Heng Feng
• Re: [PATCH V7 0/7] Refactor and add AHCI support for tegra210
  • From: Mikko Perttunen
• Re: [PATCH] libata: update documentation for sysfs interfaces
  • From: Tejun Heo
• Re: [PATCH] ata: sata_rcar: Remove unused variable in sata_rcar_init_controller()
  • From: Tejun Heo
• Re: [PATCH] libata: transport: cleanup documentation of sysfs interface
  • From: Tejun Heo
• Re: [PATCH] scsi: ata: don't reset three times if device is offline for SAS host
  • From: Tejun Heo
• [PATCH] ata: sata_rcar: Remove unused variable in sata_rcar_init_controller()
  • From: Geert Uytterhoeven
• [PATCH] libata: transport: cleanup documentation of sysfs interface
  • From: Aishwarya Pant
• [PATCH] libata: update documentation for sysfs interfaces
  • From: Aishwarya Pant
• Re: [PATCH] scsi: ata: don't reset three times if device is offline for SAS host
  • From: chenxiang (M)
• [PATCH V7 7/7] ata: ahci_tegra: Add AHCI support for Tegra210
  • From: Preetham Chandru Ramchandra
• [PATCH V7 6/7] ata: ahci_tegra: disable DIPM
  • From: Preetham Chandru Ramchandra
• [PATCH V7 5/7] ata: ahci_tegra: disable devslp for t124
  • From: Preetham Chandru Ramchandra
• [PATCH V7 4/7] ata: ahci_tegra: initialize regulators from soc_data
  • From: Preetham Chandru Ramchandra
• [PATCH V7 3/7] ata: ahci_tegra: Update initialization sequence
  • From: Preetham Chandru Ramchandra
• [PATCH V7 2/7] arm64: tegra: Enable AHCI on Jetson TX1
  • From: Preetham Chandru Ramchandra
• [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
  • From: Preetham Chandru Ramchandra
• [PATCH V7 0/7] Refactor and add AHCI support for tegra210
  • From: Preetham Chandru Ramchandra
• Re: [PATCH/RFT v3] sata_rcar: Reset SATA PHY when Salvator-X board resumes
  • From: Tejun Heo
• Re: [PATCH] libata: don't try to pass through NCQ commands to non-NCQ devices
  • From: Tejun Heo
• Re: [PATCH] libata: remove WARN() for DMA or PIO command without data
  • From: Tejun Heo
• Re: [PATCH] libata: fix length validation of ATAPI-relayed SCSI commands
  • From: Tejun Heo
• Re: [PATCH] ata: libahci: fix comment indentation
  • From: Tejun Heo
• Re: [PATCH] ahci: Add check for device presence (PCIe hot unplug) in ahci_stop_engine()
  • From: Tejun Heo
• RE: [PATCH V6 6/7] ata: ahci_tegra: disable DIPM
  • From: Preetham Chandru
• RE: [PATCH V6 4/7] ata: ahci_tegra: initialize regulators from soc_data
  • From: Preetham Chandru
• RE: [PATCH V6 7/7] ata: ahci_tegra: Add AHCI support for tegra210
  • From: Preetham Chandru
• RE: [PATCH V6 3/7] ata: ahci_tegra: Update initialization sequence
  • From: Preetham Chandru
• RE: [PATCH V6 2/7] arm64: tegra: Enable AHCI on Jetson TX1
  • From: Preetham Chandru
• RE: [PATCH V6 1/7] dt-bindings: tegra: add binding documentation
  • From: Preetham Chandru
• Re: [PATCH] Fix compile warning with ATA_DEBUG enabled
  • From: Tejun Heo
• Re: [PATCH] scsi: ata: don't reset three times if device is offline for SAS host
  • From: Tejun Heo
• Re: [PATCH] ata: add Amiga Gayle PATA controller driver
  • From: Philippe Ombredanne
• [PATCH] ata: add Amiga Gayle PATA controller driver
  • From: Bartlomiej Zolnierkiewicz
• Re: scsi: sg: assorted memory corruptions
  • From: Eric Biggers
• Re: [PATCH/RFT v3] sata_rcar: Reset SATA PHY when Salvator-X board resumes
  • From: Yoshihiro Kaneko
• [PATCH] ata: libahci: fix comment indentation
  • From: Baruch Siach
• Re: [PATCH/RFT v3] sata_rcar: Reset SATA PHY when Salvator-X board resumes
  • From: Sergei Shtylyov
• [PATCH/RFT v3] sata_rcar: Reset SATA PHY when Salvator-X board resumes
  • From: Yoshihiro Kaneko
• Re: scsi: sg: assorted memory corruptions
  • From: Dmitry Vyukov
• Re: scsi: sg: assorted memory corruptions
  • From: Eric Biggers
• [PATCH] libata: don't try to pass through NCQ commands to non-NCQ devices
  • From: Eric Biggers
• [PATCH] libata: remove WARN() for DMA or PIO command without data
  • From: Eric Biggers
• [PATCH] libata: fix length validation of ATAPI-relayed SCSI commands
  • From: Eric Biggers
• Re: scsi: sg: assorted memory corruptions
  • From: Dmitry Vyukov
• [GIT] IDE
  • From: David Miller
• Re: [PATCH resend 3/6] cdrom: wait for tray to close
  • From: Michal Suchánek
• [GIT PULL] libata changes for v4.16-rc1
  • From: Tejun Heo
• [PATCH] ahci: Add check for device presence (PCIe hot unplug) in ahci_stop_engine()
  • From: Stefan Roese
• Re: [PATCH] ide: remove duplicated assignment to 'cursg'
  • From: David Miller
• Re: [PATCH resend 6/6] cdrom: wait for drive to become ready
  • From: Bart Van Assche
• Re: [PATCH resend 3/6] cdrom: wait for tray to close
  • From: Bart Van Assche
• Re: [PATCH resend 2/6] cdrom: factor out common open_for_* code
  • From: Bart Van Assche
• Re: [PATCH resend 1/6] delay: add poll_event_interruptible
  • From: Bart Van Assche
• Re: [PATCH resend 0/6] Fix cdrom autoclose
  • From: Michal Suchánek
• [PATCH resend 5/6] Documentetion: cdrom: introduce CDS_DRIVE_ERROR
  • From: Michal Suchanek
• [PATCH resend 1/6] delay: add poll_event_interruptible
  • From: Michal Suchanek
• [PATCH resend 3/6] cdrom: wait for tray to close
  • From: Michal Suchanek
• [PATCH resend 4/6] cdrom: introduce CDS_DRIVE_ERROR
  • From: Michal Suchanek
• [PATCH resend 6/6] cdrom: wait for drive to become ready
  • From: Michal Suchanek
• [PATCH resend 2/6] cdrom: factor out common open_for_* code
  • From: Michal Suchanek
• Re: [PATCH resend 0/6] Fix cdrom autoclose
  • From: James Bottomley
• [PATCH resend 0/6] Fix cdrom autoclose
  • From: Michal Suchanek
• [PATCH] Fix compile warning with ATA_DEBUG enabled
  • From: dongbo (E)
• Re: [PATCH] ata: pata_it821x: Replace mdelay with usleep_range in it821x_firmware_command
  • From: Tejun Heo
• Re: [PATCH] ata: pata_pdc2027x: Replace mdelay with msleep
  • From: Tejun Heo
• Re: [PATCH] ata: sata_mv: Replace mdelay with usleep_range in mv_reset_channel
  • From: Tejun Heo
• [PATCH] ata: pata_pdc2027x: Replace mdelay with msleep
  • From: Jia-Ju Bai
• [PATCH] ata: pata_it821x: Replace mdelay with usleep_range in it821x_firmware_command
  • From: Jia-Ju Bai
• [PATCH] ata: sata_mv: Replace mdelay with usleep_range in mv_reset_channel
  • From: Jia-Ju Bai
• [PATCH] scsi: ata: don't reset three times if device is offline for SAS host
  • From: chenxiang
• Re: [PATCH V6 7/7] ata: ahci_tegra: Add AHCI support for tegra210
  • From: Mikko Perttunen
• Re: [PATCH V6 6/7] ata: ahci_tegra: disable DIPM
  • From: Mikko Perttunen
• Re: [PATCH V6 5/7] ata: ahci_tegra: disable devslp for t124
  • From: Mikko Perttunen
• Re: [PATCH V6 4/7] ata: ahci_tegra: initialize regulators from soc_data
  • From: Mikko Perttunen
• Re: [PATCH V6 3/7] ata: ahci_tegra: Update initialization sequence
  • From: Mikko Perttunen
• Re: [PATCH V6 2/7] arm64: tegra: Enable AHCI on Jetson TX1
  • From: Mikko Perttunen
• Re: [PATCH V6 1/7] dt-bindings: tegra: add binding documentation
  • From: Mikko Perttunen
• Re: [PATCH V6 1/7] dt-bindings: tegra: add binding documentation
  • From: Mikko Perttunen
• [GIT PULL] libata fixes for v4.15-rc8
  • From: Tejun Heo
• Re: [PATCH] ata: remove pata_at32
  • From: Tejun Heo
• [PATCH] ata: remove pata_at32
  • From: Corentin Labbe
• Re: [PATCH] phy: brcm-sata: fix semicolon.cocci warnings
  • From: Tejun Heo
• [tj-libata:for-4.16 14/15] drivers/phy/broadcom/phy-brcm-sata.c:534:2-3: Unneeded semicolon
  • From: kbuild test robot
• [PATCH] phy: brcm-sata: fix semicolon.cocci warnings
  • From: kbuild test robot
• Re: [PATCH v2 0/2] ata: ahci_brcm: Recover from failures to identify devices
  • From: Tejun Heo
• Re: [PATCH v2 1/2] phy: brcm-sata: Implement calibrate callback
  • From: Kishon Vijay Abraham I
• [PATCH] ide: remove duplicated assignment to 'cursg'
  • From: Colin King
• Re: [PATCH v2] sata: sata_rcar: Reset SATA PHY when Salvator-X board resumes
  • From: Sergei Shtylyov
• Re: [PATCH v2] sata: sata_rcar: Reset SATA PHY when Salvator-X board resumes
  • From: Sergei Shtylyov
• Re: [PATCH v2] sata: sata_rcar: Reset SATA PHY when Salvator-X board resumes
  • From: Sergei Shtylyov
• Re: [PATCH v2 0/2] ata: ahci_brcm: Recover from failures to identify devices
  • From: Tejun Heo
• [PATCH v2] sata: sata_rcar: Reset SATA PHY when Salvator-X board resumes
  • From: Yoshihiro Kaneko
• Re: [PATCH v3 00/27] kill devm_ioremap_nocache
  • From: Yisheng Xie
• [PATCH v2 2/2] ata: ahci_brcm: Recover from failures to identify devices
  • From: Florian Fainelli
• [PATCH v2 1/2] phy: brcm-sata: Implement calibrate callback
  • From: Florian Fainelli
• [PATCH v2 0/2] ata: ahci_brcm: Recover from failures to identify devices
  • From: Florian Fainelli
• Re: [PATCH 2/2] ahci: Use usleep_range() in ahci_start_port()
  • From: Mika Westerberg
• Re: [PATCH 2/2] ahci: Use usleep_range() in ahci_start_port()
  • From: Tejun Heo
• Re: [PATCH 1/2] ahci: Add Intel Cannon Lake PCH-H PCI ID
  • From: Tejun Heo
• [PATCH 1/2] ahci: Add Intel Cannon Lake PCH-H PCI ID
  • From: Mika Westerberg
• [PATCH 2/2] ahci: Use usleep_range() in ahci_start_port()
  • From: Mika Westerberg
• Re: [PATCH 1/3] ata: Allow having a port recovery callback
  • From: Florian Fainelli
• Re: [PATCH 1/3] ata: Allow having a port recovery callback
  • From: Sergei Shtylyov
• Re: [PATCH 1/3] ata: Allow having a port recovery callback
  • From: Tejun Heo
• [PATCH 1/3] ata: Allow having a port recovery callback
  • From: Florian Fainelli
• [PATCH 2/3] phy: brcm-sata: Implementation calibrate callback
  • From: Florian Fainelli
• [PATCH 3/3] ata: ahci_brcm: Recover from failures to identify devices
  • From: Florian Fainelli
• [PATCH 0/3] ata: ahci_brcm: Recover from failures to identify devices
  • From: Florian Fainelli
• [PATCH V6 7/7] ata: ahci_tegra: Add AHCI support for tegra210
  • From: Preetham Chandru Ramchandra
• [PATCH V6 6/7] ata: ahci_tegra: disable DIPM
  • From: Preetham Chandru Ramchandra
• [PATCH V6 5/7] ata: ahci_tegra: disable devslp for t124
  • From: Preetham Chandru Ramchandra
• [PATCH V6 4/7] ata: ahci_tegra: initialize regulators from soc_data
  • From: Preetham Chandru Ramchandra
• [PATCH V6 3/7] ata: ahci_tegra: Update initialization sequence
  • From: Preetham Chandru Ramchandra
• [PATCH V6 2/7] arm64: tegra: Enable AHCI on Jetson TX1
  • From: Preetham Chandru Ramchandra
• [PATCH V6 1/7] dt-bindings: tegra: add binding documentation
  • From: Preetham Chandru Ramchandra
• [PATCH V6 0/7] Refactor and add AHCI support for tegra210
  • From: Preetham Chandru Ramchandra
• Re: [PATCH 0/2] Change frame type for SET MAX commands
  • From: Martin K. Petersen
• Re: [PATCH 1/2] ata: enhance the definition of SET MAX feature field value
  • From: Tejun Heo
• Re: [PATCH 1/2] ata: enhance the definition of SET MAX feature field value
  • From: Martin K. Petersen
• Re: [PATCH] libata:pata_atiixp: Don't use unconnected secondary port on SB600
  • From: Tejun Heo
• Re: [PATCH] ata_piix: constify pci_bits
  • From: Tejun Heo
• Re: libata:pata_atiixp: Don't use unconnected secondary port on SB600
  • From: Darren Stevens
• Re: [PATCH v3 00/27] kill devm_ioremap_nocache
  • From: Christophe LEROY
• Re: [PATCH v3 00/27] kill devm_ioremap_nocache
  • From: Yisheng Xie
• [PATCH] ata_piix: constify pci_bits
  • From: Arvind Yadav
• Re: [PATCH] ata: ahci_brcm: Avoid clobbering SATA_TOP_CTRL_BUS_CTRL
  • From: Tejun Heo
• Re: [PATCH] libata:pata_atiixp: Don't use unconnected secondary port on SB600
  • From: Tejun Heo
• Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
  • From: Sergei Shtylyov
• [PATCH] libata:pata_atiixp: Don't use unconnected secondary port on SB600
  • From: Darren Stevens
• Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
  • From: Sergei Shtylyov
• Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
  • From: Yoshihiro Kaneko
• [PATCH 2/2] scsi: hisi_sas: Change frame type for SET MAX commands
  • From: chenxiang
• [PATCH 0/2] Change frame type for SET MAX commands
  • From: chenxiang
• [PATCH 1/2] ata: enhance the definition of SET MAX feature field value
  • From: chenxiang
• Re: [PATCH v3 27/27] devres: kill devm_ioremap_nocache
  • From: Yisheng Xie
• Re: [PATCH v3 00/27] kill devm_ioremap_nocache
  • From: Yisheng Xie
• Re: [PATCH v3 00/27] kill devm_ioremap_nocache
  • From: Yisheng Xie
• Re: [PATCH v3 00/27] kill devm_ioremap_nocache
  • From: christophe leroy
• Re: [PATCH v3 00/27] kill devm_ioremap_nocache
  • From: christophe leroy
• Re: [PATCH v3 00/27] kill devm_ioremap_nocache
  • From: Guenter Roeck
• Re: [PATCH v3 00/27] kill devm_ioremap_nocache
  • From: Greg KH
• Re: [PATCH v3 27/27] devres: kill devm_ioremap_nocache
  • From: Greg KH
• [PATCH v3 27/27] devres: kill devm_ioremap_nocache
  • From: Yisheng Xie
• [PATCH v3 16/27] ata: replace devm_ioremap_nocache with devm_ioremap
  • From: Yisheng Xie
• [PATCH v3 00/27] kill devm_ioremap_nocache
  • From: Yisheng Xie
• [PATCH] ata: ahci_brcm: Avoid clobbering SATA_TOP_CTRL_BUS_CTRL
  • From: Florian Fainelli
• Re: about warning in ata_eh_finish()
  • From: Jason Yan
• Re: about warning in ata_eh_finish()
  • From: Tejun Heo
• about warning in ata_eh_finish()
  • From: Jason Yan
• Re: [PATCH V4 10/26] Drivers: ide: deprecate pci_get_bus_and_slot()
  • From: David Miller
• Re: [PATCH] libata: apply MAX_SEC_1024 to all LITEON EP1 series devices
  • From: Tejun Heo
• Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
  • From: Simon Horman
• [PATCH V4 04/26] ata: deprecate pci_get_bus_and_slot()
  • From: Sinan Kaya
• [PATCH V4 10/26] Drivers: ide: deprecate pci_get_bus_and_slot()
  • From: Sinan Kaya
• [PATCH] libata: apply MAX_SEC_1024 to all LITEON EP1 series devices
  • From: Xinyu Lin
• [PATCH 5/6] Documentetion: cdrom: introduce CDS_DRIVE_ERROR
  • From: Michal Suchanek
• [PATCH 0/6] Fix cdrom autoclose
  • From: Michal Suchanek
• Re: When will Linux support new RAID controllers
  • From: David F.
• [GIT PULL] libata fixes for v4.15-rc3
  • From: Tejun Heo
• Re: [PATCH v2] ahci: Allow setting a default LPM policy for mobile chipsets
  • From: Tejun Heo
• [PATCH v2] ahci: Allow setting a default LPM policy for mobile chipsets
  • From: Hans de Goede
• Re: [PATCH 3/3] ahci: Allow setting a default LPM policy for mobile chipsets
  • From: Hans de Goede
• Re: [PATCH v5] pata_pdc2027x: Fix pdc_adjust_pll() to return the error value
  • From: Tejun Heo
• Re: [PATCH 3/3] ahci: Allow setting a default LPM policy for mobile chipsets
  • From: Tejun Heo
• Re: [PATCH 2/3] ahci: Add PCI ids for Intel Bay Trail, Cherry Trail and Apollo Lake AHCI
  • From: Tejun Heo
• Re: When will Linux support new RAID controllers
  • From: Dennis Mungai
• Re: When will Linux support new RAID controllers
  • From: Alan Cox
• Re: When will Linux support new RAID controllers
  • From: Christoph Hellwig
• Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
  • From: Geert Uytterhoeven
• [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
  • From: Yoshihiro Kaneko
• [PATCH v5] pata_pdc2027x: Fix pdc_adjust_pll() to return the error value
  • From: Arvind Yadav
• [PATCH 1/3] ahci: Annotate PCI ids for mobile Intel chipsets as such
  • From: Hans de Goede
• [PATCH 2/3] ahci: Add PCI ids for Intel Bay Trail, Cherry Trail and Apollo Lake AHCI
  • From: Hans de Goede
• [PATCH 3/3] ahci: Allow setting a default LPM policy for mobile chipsets
  • From: Hans de Goede
• [PATCH 0/3] ahci: Allow setting a default LPM policy for mobile chipsets
  • From: Hans de Goede
• Re: [PATCH v2] pata_pdc2027x: Fix coding sytle errors
  • From: Sergei Shtylyov
• Re: [PATCH v4] pata_pdc2027x: Fix pdc_adjust_pll() to return the error value
  • From: Sergei Shtylyov
• Re: [PATCH v2] pata_pdc2027x: Fix coding sytle errors
  • From: Tejun Heo
• [PATCH v4] pata_pdc2027x: Fix pdc_adjust_pll() to return the error value
  • From: Arvind Yadav
• [PATCH v2] pata_pdc2027x: Fix coding sytle errors
  • From: Arvind Yadav
• Re: [PATCH] pata_pdc2027x: Fix coding sytle error
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] pata_pdc2027x: Fix coding sytle error
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v3] pata_pdc2027x: Remove unnecessary error check
  • From: Bartlomiej Zolnierkiewicz
• Re: When will Linux support new RAID controllers
  • From: David F.
• Re: [PATCH] libata: sata_down_spd_limit should return if driver has not recorded sstatus speed
  • From: Tejun Heo
• Re: Wiki account on ata.wiki.kernel.org?
  • From: Tejun Heo
• Re: [PATCH 2/2] ahci: mtk: Change driver name to ahci-mtk
  • From: Tejun Heo
• Re: Wiki account on ata.wiki.kernel.org?
  • From: Matthias Peter Walther
• Re: Wiki account on ata.wiki.kernel.org?
  • From: Tejun Heo
• Re: [PATCH] ahci: qoriq: refine port register configuration
  • From: Tejun Heo
• [PATCH] ahci: qoriq: refine port register configuration
  • From: andy.tang
• Wiki account on ata.wiki.kernel.org?
  • From: Matthias Peter Walther
• [PATCH 2/2] ahci: mtk: Change driver name to ahci-mtk
  • From: Matthias Brugger
• Re: AM4 B350 chipset Sata/IDE problem
  • From: Mark Hounschell
• Re: [PATCH] libata: sata_down_spd_limit should return if driver has not recorded sstatus speed
  • From: David Milburn
• Re: [PATCH V3 04/29] ata: deprecate pci_get_bus_and_slot()
  • From: Tejun Heo
• Re: [PATCH] pata_pdc2027x : make pdc2027x_*_timing structures const
  • From: Tejun Heo
• Re: [PATCH] ata: mediatek: Fix typo in module description
  • From: Tejun Heo
• Re: [patch] lewisburg map/pcs register handling
  • From: Tejun Heo
• Re: [PATCH] libata: sata_down_spd_limit should return if driver has not recorded sstatus speed
  • From: Tejun Heo
• [PATCH V3 04/29] ata: deprecate pci_get_bus_and_slot()
  • From: Sinan Kaya
• [PATCH V3 11/29] Drivers: ide: deprecate pci_get_bus_and_slot()
  • From: Sinan Kaya
• [PATCH] pata_pdc2027x : make pdc2027x_*_timing structures const
  • From: Arvind Yadav
• Re: [PATCH] pata_pdc2027x: Fix coding sytle error
  • From: arvindY
• Re: [PATCH] pata_pdc2027x: Fix coding sytle error
  • From: Joe Perches
• [PATCH] pata_pdc2027x: Fix coding sytle error
  • From: Arvind Yadav
• [PATCH v3] pata_pdc2027x: Remove unnecessary error check
  • From: Arvind Yadav
• Re: [PATCH] pata_pdc2027x: Remove unnecessary error check and coding style error.
  • From: arvindY
• Re: [PATCH] pata_pdc2027x: Remove unnecessary error check and coding style error.
  • From: Sergei Shtylyov
• [PATCH v2] pata_pdc2027x: Remove unnecessary error check and coding style error.
  • From: Arvind Yadav
• Re: [PATCH] pata_pdc2027x: Remove unnecessary error check and coding style error.
  • From: Joe Perches
• [PATCH] pata_pdc2027x: Remove unnecessary error check and coding style error.
  • From: Arvind Yadav
• Re: AM4 B350 chipset Sata/IDE problem
  • From: sonofagun
• [PATCH V2 04/29] ata: deprecate pci_get_bus_and_slot()
  • From: Sinan Kaya
• [PATCH V2 11/29] Drivers: ide: deprecate pci_get_bus_and_slot()
  • From: Sinan Kaya
• Re: [PATCH 12/30] Drivers: ide: deprecate pci_get_bus_and_slot()
  • From: Sinan Kaya
• Re: AM4 B350 chipset Sata/IDE problem
  • From: Mark Hounschell
• Re: AM4 B350 chipset Sata/IDE problem
  • From: sonofagun
• Re: [PATCH 12/30] Drivers: ide: deprecate pci_get_bus_and_slot()
  • From: Greg KH
• [PATCH 04/30] ata: deprecate pci_get_bus_and_slot()
  • From: Sinan Kaya
• [PATCH 12/30] Drivers: ide: deprecate pci_get_bus_and_slot()
  • From: Sinan Kaya
• AM4 B350 chipset Sata/IDE problem
  • From: Mark Hounschell
• Re: [ata_port_probe] BUG: unable to handle kernel NULL pointer dereference at 0000000000000350
  • From: Arnd Bergmann
• Re: [ata_port_probe] BUG: unable to handle kernel NULL pointer dereference at 0000000000000350
  • From: Tejun Heo
• Re: [ata_port_probe] BUG: unable to handle kernel NULL pointer dereference at 0000000000000350
  • From: Arnd Bergmann
• Re: [ata_port_probe] BUG: unable to handle kernel NULL pointer dereference at 0000000000000350
  • From: Fengguang Wu
• [ata_port_probe] BUG: unable to handle kernel NULL pointer dereference at 0000000000000350
  • From: Fengguang Wu
• Re: [ata_port_detach] WARNING: CPU: 0 PID: 1 at drivers/ata/libata-core.c:6613 ata_port_detach+0x9b/0x180
  • From: Arnd Bergmann
• [ata_port_detach] WARNING: CPU: 0 PID: 1 at drivers/ata/libata-core.c:6613 ata_port_detach+0x9b/0x180
  • From: Fengguang Wu
• [PATCH] ata: mediatek: Fix typo in module description
  • From: Albert Pool
• [GIT] IDE
  • From: David Miller
• [GIT PULL] libata changes for v4.15-rc1
  • From: Tejun Heo
• Re: Delock 89384 Sata Controller Causes Lockups Under Heavy Load
  • From: Matthias Peter Walther
• [patch] lewisburg map/pcs register handling
  • From: Peter Chang
• [PATCH] libata: sata_down_spd_limit should return if driver has not recorded sstatus speed
  • From: David Milburn
• Re: [PATCH v2] ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode.
  • From: Tejun Heo
• Re: [PATCH v1] ata: sata_dwc_460ex: Propagate platform device ID to DMA driver
  • From: Tejun Heo
• Re: Manual unbind of ATA devices causes use-after-free
  • From: Tejun Heo
• Re: Manual unbind of ATA devices causes use-after-free
  • From: Taras Kondratiuk
• [PATCH v2] ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode.
  • From: Martyn Welch
• Re: [PATCH] ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode.
  • From: Sergei Shtylyov
• [PATCH] ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode.
  • From: Martyn Welch
• Re: When will Linux support new RAID controllers
  • From: David F.
• [PATCH v1] ata: sata_dwc_460ex: Propagate platform device ID to DMA driver
  • From: Andy Shevchenko
• Re: When will Linux support new RAID controllers
  • From: Dennis Mungai
• Re: When will Linux support new RAID controllers
  • From: Christoph Hellwig
• Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
  • From: Bartlomiej Zolnierkiewicz
• Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
  • From: Bartlomiej Zolnierkiewicz
• Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] drivers/ide-cd: Handle missing driver data during status check gracefully
  • From: David Miller
• Re: [PATCH] drivers/ide-cd: Handle missing driver data during status check gracefully
  • From: Linus Torvalds
• [PATCH] drivers/ide-cd: Handle missing driver data during status check gracefully
  • From: Borislav Petkov
• Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
  • From: Fengguang Wu
• Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
  • From: Bart Van Assche
• Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
  • From: Linus Torvalds
• Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
  • From: Borislav Petkov
• Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
  • From: Fengguang Wu
• Re: [bug report] ata: ceva: Move sata port phy oob settings to device-tree
  • From: Dan Carpenter
• RE: [bug report] ata: ceva: Move sata port phy oob settings to device-tree
  • From: Anurag Kumar Vulisha
• [bug report] ata: ceva: Move sata port phy oob settings to device-tree
  • From: Dan Carpenter
• Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
  • From: Borislav Petkov
• [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
  • From: Fengguang Wu
• Re: [ata_scsi_offline_dev] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
  • From: Hannes Reinecke
• Re: [ata_scsi_offline_dev] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
  • From: Martin K. Petersen
• Re: [ata_scsi_offline_dev] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
  • From: Tejun Heo
• Re: [ata_scsi_offline_dev] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
  • From: Linus Torvalds
• Re: Manual unbind of ATA devices causes use-after-free
  • From: Tejun Heo
• Re: Manual unbind of ATA devices causes use-after-free
  • From: Taras Kondratiuk
• Re: [PATCH v2] ata: fixes kernel crash while tracing ata_eh_link_autopsy event
  • From: Tejun Heo
• Re: Manual unbind of ATA devices causes use-after-free
  • From: Tejun Heo
• [PATCH] ide: Convert timers to use timer_setup()
  • From: Kees Cook
• Re: [PATCH] block: fix CDROM dependency on BLK_DEV
  • From: Jens Axboe
• Re: [PATCH] block: fix CDROM dependency on BLK_DEV
  • From: Arnd Bergmann
• Re: [PATCH] block: fix CDROM dependency on BLK_DEV
  • From: Bart Van Assche
• Re: [PATCH] block: fix CDROM dependency on BLK_DEV
  • From: Bart Van Assche
• Re: [PATCH] block: fix CDROM dependency on BLK_DEV
  • From: Jens Axboe
• [PATCH] block: fix CDROM dependency on BLK_DEV
  • From: Arnd Bergmann
• [PATCH v2] ata: fixes kernel crash while tracing ata_eh_link_autopsy event
  • From: Rameshwar Prasad Sahu
• Re: [PATCH] ata: fixes kernel crash while tracing ata_eh_link_autopsy event
  • From: Rameshwar Sahu
• Manual unbind of ATA devices causes use-after-free
  • From: Taras Kondratiuk
• Re: [PATCH] ata: fixes kernel crash while tracing ata_eh_link_autopsy event
  • From: Tejun Heo
• problem with Marvell 88SE9215
  • From: Emilio Lazo Zaia
• Re: [PATCH] ahci: Add support for Cavium's fifth generation SATA controller
  • From: Jon Masters
• Re: BUG: unable to handle kernel paging request in ata_bmdma_qc_prep
  • From: Dmitry Vyukov
• WARNING in ata_bmdma_qc_issue
  • From: syzbot
• BUG: unable to handle kernel paging request in ata_bmdma_qc_prep
  • From: syzbot
• Re: [PATCH] ata: pata_pdc2027x: Fix space before '[' error.
  • From: Tejun Heo
• [PATCH] ata: pata_pdc2027x: Fix space before '[' error.
  • From: Arvind Yadav
• Re: WARNING in ata_qc_issue
  • From: Tejun Heo
• Re: [PATCH] libata: fix spelling mistake: 'ambigious' -> 'ambiguous'
  • From: Tejun Heo
• [PATCH] libata: fix spelling mistake: 'ambigious' -> 'ambiguous'
  • From: Arvind Yadav
• WARNING in ata_qc_issue
  • From: syzbot
• Re: WARNING in ata_qc_issue
  • From: Dmitry Vyukov
• Re: [PATCH] ata: fixes kernel crash while tracing ata_eh_link_autopsy event
  • From: Tejun Heo
• [PATCH] ata: fixes kernel crash while tracing ata_eh_link_autopsy event
  • From: Rameshwar Prasad Sahu
• Re: [PATCH 0/2] libata: hotplug link speed
  • From: David Milburn
• Re: [PATCH v2 2/9] ata: ceva: Move sata port phy oob settings to device-tree
  • From: Tejun Heo
• Re: [PATCH v2 0/9] Ata ceva patches
  • From: Tejun Heo
• Re: [PATCH 0/2] libata: hotplug link speed
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: initialize link speed from sstatus if online.
  • From: Tejun Heo
• Re: [PATCH] ata: mark expected switch fall-throughs
  • From: Tejun Heo
• Re: [PATCH] ata: sata_mv: remove a redundant assignment to pointer ehi
  • From: Tejun Heo
• Re: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
  • From: Tejun Heo
• Re: [PATCH v2 2/9] ata: ceva: Move sata port phy oob settings to device-tree
  • From: Tejun Heo
• Re: [PATCH v2 2/9] ata: ceva: Move sata port phy oob settings to device-tree
  • From: Michal Simek
• Re: [PATCH V8 5/5] libata: Align DMA buffer todma_get_cache_alignment()
  • From: 陈华才
• Re: [PATCH V8 4/5] libsas: Align SMP req/resp to dma_get_cache_alignment()
  • From: kbuild test robot
• [PATCH 1/2] libata: initialize link speed from sstatus if online.
  • From: David Milburn
• [PATCH 2/2] Allow error handler to change speed only if link is online.
  • From: David Milburn
• [PATCH 0/2] libata: hotplug link speed
  • From: David Milburn
• Re: [PATCH V8 4/5] libsas: Align SMP req/resp to dma_get_cache_alignment()
  • From: Christoph Hellwig
• Re: [PATCH V8 3/5] scsi: Align block queue to dma_get_cache_alignment()
  • From: Christoph Hellwig
• Re: [PATCH V8 1/5] dma-mapping: Rework dma_get_cache_alignment()
  • From: Christoph Hellwig
• Re: [PATCH V8 5/5] libata: Align DMA buffer to dma_get_cache_alignment()
  • From: Matt Redfearn
• Re: [PATCH V8 5/5] libata: Align DMA buffer to dma_get_cache_alignment()
  • From: Alan Cox
• Re: [PATCH V8 1/5] dma-mapping: Rework dma_get_cache_alignment()
  • From: Mark Greer
• Re: [PATCH V8 5/5] libata: Align DMA buffer to dma_get_cache_alignment()
  • From: Tejun Heo
• Re: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
  • From: Yu Chen
• BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
  • From: Yu Chen
• Re: [PATCH V8 4/5] libsas: Align SMP req/resp todma_get_cache_alignment()
  • From: 陈华才
• Re: [PATCH V8 5/5] libata: Align DMA buffer todma_get_cache_alignment()
  • From: 陈华才
• Re: [PATCH V8 4/5] libsas: Align SMP req/resp to dma_get_cache_alignment()
  • From: Marek Szyprowski
• Re: [PATCH V8 5/5] libata: Align DMA buffer to dma_get_cache_alignment()
  • From: Sergei Shtylyov
• [PATCH V8 1/5] dma-mapping: Rework dma_get_cache_alignment()
  • From: Huacai Chen
• [PATCH V8 2/5] MIPS: Implement dma_map_ops::get_cache_alignment()
  • From: Huacai Chen
• [PATCH V8 4/5] libsas: Align SMP req/resp to dma_get_cache_alignment()
  • From: Huacai Chen
• [PATCH V8 5/5] libata: Align DMA buffer to dma_get_cache_alignment()
  • From: Huacai Chen
• [PATCH V8 3/5] scsi: Align block queue to dma_get_cache_alignment()
  • From: Huacai Chen
• Re: [PATCH] ahci: Add support for Cavium's fifth generation SATA controller
  • From: Christoph Hellwig
• [PATCH] ahci: Convert timers to use timer_setup()
  • From: Kees Cook
• [PATCH] libata: Convert timers to use timer_setup()
  • From: Kees Cook
• [PATCH] ata: sata_mv: remove a redundant assignment to pointer ehi
  • From: Colin King
• Re: [PATCH 1/2] dt-bindings: add binding for Allwinner R40 SATA AHCI controller
  • From: Rob Herring
• [PATCH] ata: mark expected switch fall-throughs
  • From: Gustavo A. R. Silva
• Re: [PATCH] documentation: Update ide-cd documentation to reflect CONFIG_BLK_DEV_HD_IDE removal
  • From: Jonathan Corbet
• [PATCH] documentation: Update ide-cd documentation to reflect CONFIG_BLK_DEV_HD_IDE removal
  • From: Finn Thain
• Re: [PATCH] ahci: Add support for Cavium's fifth generation SATA controller
  • From: Tejun Heo
• [PATCH] ahci: Add support for Cavium's fifth generation SATA controller
  • From: Radha Mohan Chintakuntla
• Re: [PATCH 1/2] dt-bindings: add binding for Allwinner R40 SATA AHCI controller
  • From: Maxime Ripard
• Re: [PATCH 2/2] ata: ahci_sunxi: add support for R40 SATA controller
  • From: Maxime Ripard
• Re: Marvell 88SE9480 Port Multiplier Support
  • From: Andrew Ryder
• Re: Marvell 88SE9480 Port Multiplier Support
  • From: James Bottomley
• [PATCH 2/2] ata: ahci_sunxi: add support for R40 SATA controller
  • From: Icenowy Zheng
• [PATCH 1/2] dt-bindings: add binding for Allwinner R40 SATA AHCI controller
  • From: Icenowy Zheng
• Marvell 88SE9480 Port Multiplier Support
  • From: Andrew Ryder
• Re: [PATCH] ahci: Convert timers to use timer_setup()
  • From: Tejun Heo
• Re: [PATCH] ahci: Convert timers to use timer_setup()
  • From: Kees Cook
• Re: [PATCH] ahci: Convert timers to use timer_setup()
  • From: Tejun Heo
• Re: [PATCH] libata: Convert timers to use timer_setup()
  • From: Tejun Heo
• Re: [PATCH] ata: sata_rcar: Use of_device_get_match_data() helper
  • From: Simon Horman
• [PATCH] libata: Convert timers to use timer_setup()
  • From: Kees Cook
• [PATCH] ahci: Convert timers to use timer_setup()
  • From: Kees Cook
• Re: [PATCH] ata: sata_rcar: Use of_device_get_match_data() helper
  • From: Sergei Shtylyov
• [PATCH] ata: sata_rcar: Use of_device_get_match_data() helper
  • From: Geert Uytterhoeven
• Resolved: downloads for SAS2008 based HBAs
  • From: Eyal Lebedinsky
• Re: [PATCH v2] ide: add missing hwif->portdev freeing on hwif_init() failure
  • From: David Miller
• Re: [PATCH v2] ide: add missing hwif->portdev freeing on hwif_init() failure
  • From: Bjorn Helgaas
• Re: [PATCH v2] drivers/ide/pci: Fix legacy IRQ assignment
  • From: Bjorn Helgaas
• Re: [PATCH v2] ide: pci: free PCI BARs on initialization failure
  • From: Bjorn Helgaas
• Re: [PATCH v2] ide: add missing hwif->portdev freeing on hwif_init() failure
  • From: Bjorn Helgaas
• Re: [PATCH v2] ide: add missing hwif->portdev freeing on hwif_init() failure
  • From: Bjorn Helgaas
• Re: [PATCH v2] ide: add missing hwif->portdev freeing on hwif_init() failure
  • From: Bjorn Helgaas
• Re: [PATCH v2] ide: pci: free PCI BARs on initialization failure
  • From: Guenter Roeck
• Re: [PATCH v2] ide: add missing hwif->portdev freeing on hwif_init() failure
  • From: Guenter Roeck
• [GIT PULL] libata fixes for v4.14-rc3
  • From: Tejun Heo
• Re: [PATCH v2] drivers/ide/pci: Fix legacy IRQ assignment
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v2] ide: pci: free PCI BARs on initialization failure
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v2] drivers/ide/pci: Fix legacy IRQ assignment
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: pci: free PCI BARs on initialization failure
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v2] ide: add missing hwif->portdev freeing on hwif_init() failure
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: add missing hwif->portdev freeing on hwif_init() failure
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v2] drivers/ide/pci: Fix legacy IRQ assignment
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v2] drivers/ide/pci: Fix legacy IRQ assignment
  • From: David Miller
• downloads for SAS2008 based HBAs
  • From: Eyal Lebedinsky
• Re: [PATCH v2] drivers/ide/pci: Fix legacy IRQ assignment
  • From: Bjorn Helgaas
• Re: [PATCH] ahci: don't ignore result code of ahci_reset_controller()
  • From: Tejun Heo
• Re: [PATCH] ahci: don't ignore result code of ahci_reset_controller()
  • From: Ard Biesheuvel
• Re: [PATCH] ahci: don't ignore result code of ahci_reset_controller()
  • From: Tejun Heo
• [PATCH] ahci: don't ignore result code of ahci_reset_controller()
  • From: Ard Biesheuvel
• Re: [PATCH] libata: make ata_port_type const
  • From: Tejun Heo
• Re: [PATCH v2] drivers/ide/pci: Fix legacy IRQ assignment
  • From: Guenter Roeck
• [PATCH v2] drivers/ide/pci: Fix legacy IRQ assignment
  • From: Lorenzo Pieralisi
• [PATCH] libata: make ata_port_type const
  • From: Bhumika Goyal
• Re: [PATCH] PCI: Fix legacy IRQ assignment execution stage
  • From: Guenter Roeck
• Re: [PATCH] PCI: Fix legacy IRQ assignment execution stage
  • From: Bjorn Helgaas
• Re: [PATCH] PCI: Fix legacy IRQ assignment execution stage
  • From: Lorenzo Pieralisi
• Re: [PATCH] PCI: Fix legacy IRQ assignment execution stage
  • From: Lorenzo Pieralisi
• Re: [PATCH] PCI: Fix legacy IRQ assignment execution stage
  • From: Lorenzo Pieralisi
• Re: [PATCH] PCI: Fix legacy IRQ assignment execution stage
  • From: Bjorn Helgaas
• Re: alpha runtime warnings due to commit 0e4c2eeb758 ("alpha/PCI: Replace pci_fixup_irqs() call with host ...")
  • From: Bjorn Helgaas
• [PATCH] PCI: Fix legacy IRQ assignment execution stage
  • From: Lorenzo Pieralisi
• Re: alpha runtime warnings due to commit 0e4c2eeb758 ("alpha/PCI: Replace pci_fixup_irqs() call with host ...")
  • From: Lorenzo Pieralisi
• Re: alpha runtime warnings due to commit 0e4c2eeb758 ("alpha/PCI: Replace pci_fixup_irqs() call with host ...")
  • From: Bjorn Helgaas
• Re: hitting a WARN() in ata_host_activate on 4.13
  • From: Tejun Heo
• hitting a WARN() in ata_host_activate on 4.13
  • From: Tycho Andersen
• Re: [PATCH][V3] libata: make static arrays const, reduces object code size
  • From: Tejun Heo
• [PATCH][V3] libata: make static arrays const, reduces object code size
  • From: Colin King
• Re: [PATCH] ata_piix: Add Fujitsu-Siemens Lifebook S6120 to short cable IDs
  • From: Tejun Heo
• Re: [PATCH] libata: make static arrays const, reduces object code size
  • From: Tejun Heo
• Re: [PATCH] ata: pata_artop: remove redundant initialization of pio
  • From: Tejun Heo
• Re: [PATCH] libata: Add new med_power_with_dipm link_power_management_policy setting
  • From: Tejun Heo
• [PATCH] ata_piix: Add Fujitsu-Siemens Lifebook S6120 to short cable IDs
  • From: Ville Syrjala
• Re: [PATCH][V2] libata: make const arrays static, reduces object code size
  • From: Sergei Shtylyov
• [PATCH][V2] libata: make const arrays static, reduces object code size
  • From: Colin King
• [PATCH] libata: make static arrays const, reduces object code size
  • From: Colin King
• [PATCH] ata: pata_artop: remove redundant initialization of pio
  • From: Colin King
• [PATCH 0/1] libata: Add new med_power_with_dipm link_power_management_policy setting
  • From: Hans de Goede
• [PATCH] libata: Add new med_power_with_dipm link_power_management_policy setting
  • From: Hans de Goede
• Re: [PATCH] [RESEND] ata: avoid gcc-7 warning in ata_timing_quantize
  • From: Tejun Heo
• [PATCH] [RESEND] ata: avoid gcc-7 warning in ata_timing_quantize
  • From: Arnd Bergmann
• Re: [GIT PULL] libata changes for v4.14-rc1
  • From: Tejun Heo
• Re: [PATCH] libata: zpodd: make arrays cdb static, reduces object code size
  • From: Tejun Heo
• Re: [PATCH] ahci: don't use MSI for devices with the braindead Intel NVMe remapping scheme
  • From: Tejun Heo
• [PATCH] libata: zpodd: make arrays cdb static, reduces object code size
  • From: Colin King
• Re: [PATCH] ahci: don't use MSI for devices with the braindead Intel NVMe remapping scheme
  • From: Dan Williams
• [PATCH] ahci: don't use MSI for devices with the braindead Intel NVMe remapping scheme
  • From: Christoph Hellwig
• Re: Boot failure due to some interaction between per-port MSI-X and Intel RST
  • From: Dan Williams
• Re: Boot failure due to some interaction between per-port MSI-X and Intel RST
  • From: John Loy
• [GIT PULL] libata changes for v4.14-rc1
  • From: Tejun Heo
• Re: Boot failure due to some interaction between per-port MSI-X and Intel RST
  • From: Christoph Hellwig
• Boot failure due to some interaction between per-port MSI-X and Intel RST
  • From: John Loy
• Re: ide: pmac: Convert to using %pOF instead of full_name
  • From: Michael Ellerman
• [GIT PULL] libata fixes for v4.13-rc7
  • From: Tejun Heo
• Re: [PATCH] libata: quirk read log on no-name M.2 SSD
  • From: Ido Schimmel
• Re: boot failure with 4.13.0-rc6 due to ATA errors
  • From: Henrique de Moraes Holschuh
• Re: boot failure with 4.13.0-rc6 due to ATA errors
  • From: Tejun Heo
• Re: boot failure with 4.13.0-rc6 due to ATA errors
  • From: Henrique de Moraes Holschuh
• Re: [PATCH] libata: quirk read log on no-name M.2 SSD
  • From: Tejun Heo
• Re: boot failure with 4.13.0-rc6 due to ATA errors
  • From: Tejun Heo
• Re: boot failure with 4.13.0-rc6 due to ATA errors
  • From: Tejun Heo
• Re: boot failure with 4.13.0-rc6 due to ATA errors
  • From: David Ahern
• Re: boot failure with 4.13.0-rc6 due to ATA errors
  • From: Tejun Heo
• Re: [PATCH v4 2/2] dt-bindings: ata: add DT bindings for MediaTek SATA controller
  • From: Tejun Heo
• Re: boot failure with 4.13.0-rc6 due to ATA errors
  • From: Christoph Hellwig
• Re: [PATCH v4 1/2] ata: mediatek: add support for MediaTek SATA controller
  • From: Ryder Lee
• Re: [PATCH] pata_octeon_cf: use of_property_read_{bool|u32}()
  • From: David Daney
• Re: boot failure with 4.13.0-rc6 due to ATA errors
  • From: Tejun Heo
• Re: boot failure with 4.13.0-rc6 due to ATA errors
  • From: David Ahern
• Re: boot failure with 4.13.0-rc6 due to ATA errors
  • From: Tejun Heo
• boot failure with 4.13.0-rc6 due to ATA errors
  • From: David Ahern
• Re: [PATCH v4 1/2] ata: mediatek: add support for MediaTek SATA controller
  • From: Tejun Heo
• Re: [PATCH] pata_octeon_cf: use of_property_read_{bool|u32}()
  • From: Tejun Heo
• ALPSS: reminder and submission deadline
  • From: Christoph Hellwig
• Re: [PATCH] libata: quirk read log on no-name M.2 SSD
  • From: Tejun Heo
• [PATCH] libata: quirk read log on no-name M.2 SSD
  • From: Christoph Hellwig
• [PATCH] pata_octeon_cf: use of_property_read_{bool|u32}()
  • From: Sergei Shtylyov
• Re: Regression due to "libata: implement SECURITY PROTOCOL IN/OUT"
  • From: Ido Schimmel
• Re: Regression due to "libata: implement SECURITY PROTOCOL IN/OUT"
  • From: Christoph Hellwig
• Re: Regression due to "libata: implement SECURITY PROTOCOL IN/OUT"
  • From: Ido Schimmel
• Re: Regression due to "libata: implement SECURITY PROTOCOL IN/OUT"
  • From: Christoph Hellwig
• Re: Regression due to "libata: implement SECURITY PROTOCOL IN/OUT"
  • From: Ido Schimmel
• Re: [PATCH v4 0/2] Add support for MediaTek AHCI SATA
  • From: Ryder Lee
• [PATCH] ata: add a blank line after declaration
  • From: Himanshu Jha
• Re: [PATCH 1/3] ata: ftide010: constify ata_port_info
  • From: Linus Walleij
• Re: [PATCH 0/3] constify ata_port_info
  • From: Tejun Heo
• [tj-libata:for-4.14 8/10] drivers/ata/pata_ftide010.c:376:31: error: assignment of member 'flags' in read-only object
  • From: kbuild test robot
• Re: [PATCH 0/3] constify ata_port_info
  • From: Tejun Heo
• Re: Regression due to "libata: implement SECURITY PROTOCOL IN/OUT"
  • From: Ido Schimmel
• Re: Regression due to "libata: implement SECURITY PROTOCOL IN/OUT"
  • From: Christoph Hellwig
• Regression due to "libata: implement SECURITY PROTOCOL IN/OUT"
  • From: Ido Schimmel
• [PATCH 1/3] ata: ftide010: constify ata_port_info
  • From: Arvind Yadav
• [PATCH 2/3] ata: pdc2027x: constify ata_port_info
  • From: Arvind Yadav
• [PATCH 3/3] ata: constify ata_port_info
  • From: Arvind Yadav
• [PATCH 0/3] constify ata_port_info
  • From: Arvind Yadav
• Re: [PATCH v2 1/9] devicetree: bindings: Add sata port phy config parameters in ahci-ceva
  • From: Rob Herring
• [PATCH v2 1/9] devicetree: bindings: Add sata port phy config parameters in ahci-ceva
  • From: Michal Simek
• [PATCH v2 3/9] ata: ceva: Add gen 3 mode support in driver
  • From: Michal Simek
• [PATCH v2 2/9] ata: ceva: Move sata port phy oob settings to device-tree
  • From: Michal Simek
• [PATCH v2 4/9] ata: ceva: Disable Device Sleep capability
  • From: Michal Simek
• [PATCH v2 7/9] ata: ceva: Correct the AXI bus configuration for SATA ports
  • From: Michal Simek
• [PATCH v2 6/9] ata: ceva: Add CCI support for SATA if CCI is enabled
  • From: Michal Simek
• [PATCH v2 8/9] ata: ceva: Correct the suspend and resume logic for SATA
  • From: Michal Simek
• [PATCH v2 9/9] ata: ceva: Add SMMU support for SATA IP
  • From: Michal Simek
• [PATCH v2 5/9] ata: ceva: Make RxWaterMark value as module parameter
  • From: Michal Simek
• [PATCH v2 0/9] Ata ceva patches
  • From: Michal Simek
• [tip:core/rcu] drivers/ata: Replace spin_unlock_wait() with lock/unlock pair
  • From: tip-bot for Paul E. McKenney
• Re: [PATCH 08/12] ide-floppy: Use blk_rq_is_scsi()
  • From: Hannes Reinecke
• Re: [PATCH 08/12] ide-floppy: Use blk_rq_is_scsi()
  • From: David Miller
• [PATCH v4 1/2] ata: mediatek: add support for MediaTek SATA controller
  • From: Ryder Lee
• [PATCH v4 2/2] dt-bindings: ata: add DT bindings for MediaTek SATA controller
  • From: Ryder Lee
• [PATCH v4 0/2] Add support for MediaTek AHCI SATA
  • From: Ryder Lee
• [PATCH 08/12] ide-floppy: Use blk_rq_is_scsi()
  • From: Bart Van Assche
• Re: [PATCH v3 2/2] dt-bindings: ata: add DT bindings for MediaTek SATA controller
  • From: Rob Herring
• Re: No I/O errors reported after SATA link hard reset
  • From: Gionatan Danti
• Re: No I/O errors reported after SATA link hard reset
  • From: Tejun Heo
• Re: No I/O errors reported after SATA link hard reset
  • From: Gionatan Danti
• Re: No I/O errors reported after SATA link hard reset
  • From: Gionatan Danti
• Re: No I/O errors reported after SATA link hard reset
  • From: Bernd Schubert
• Re: No I/O errors reported after SATA link hard reset
  • From: Tejun Heo
• Re: No I/O errors reported after SATA link hard reset
  • From: Bernd Schubert
• Re: No I/O errors reported after SATA link hard reset
  • From: Tejun Heo
• Re: No I/O errors reported after SATA link hard reset
  • From: Bernd Schubert
• Re: [PATCH] PNP: ide: constify pnp_device_id
  • From: David Miller
• Re: [PATCH] sata: ahci-da850: Fix some error handling paths in 'ahci_da850_probe()'
  • From: Tejun Heo
• Re: [PATCH] sata: ahci-da850: Fix some error handling paths in 'ahci_da850_probe()'
  • From: Sergei Shtylyov
• [PATCH] sata: ahci-da850: Fix some error handling paths in 'ahci_da850_probe()'
  • From: Christophe JAILLET
• [PATCH] PNP: ide: constify pnp_device_id
  • From: Arvind Yadav
• Re: [PATCH v3 1/2] ata: mediatek: add support for MediaTek SATA controller
  • From: Matthias Brugger
• Re: [PATCH v3 1/2] ata: mediatek: add support for MediaTek SATA controller
  • From: Tejun Heo
• [PATCH v3 1/2] ata: mediatek: add support for MediaTek SATA controller
  • From: Ryder Lee
• [PATCH v3 2/2] dt-bindings: ata: add DT bindings for MediaTek SATA controller
  • From: Ryder Lee
• [PATCH v3 0/2] Add support for MediaTek AHCI SATA
  • From: Ryder Lee
• Re: [PATCH v2] cs5536: add support for IDE controller variant
  • From: Tejun Heo
• Re: [PATCH 1/2] ata: sata_gemini: Retire custom pin control
  • From: Tejun Heo
• Re: [PATCH 2/2] ata: sata_gemini: Introduce explicit IDE pin control
  • From: Tejun Heo
• Re: [PATCH 1/9] devicetree: bindings: Add sata port phy config parameters in ahci-ceva
  • From: Michal Simek
• Re: [PATCH v2 2/2] dt-bindings: ata: add DT bindings for MediaTek SATA controller
  • From: Ryder Lee
• Re: [PATCH v2 2/2] dt-bindings: ata: add DT bindings for MediaTek SATA controller
  • From: Ryder Lee
• Re: [PATCH v2 2/2] dt-bindings: ata: add DT bindings for MediaTek SATA controller
  • From: Rob Herring
• Re: [PATCH 1/9] devicetree: bindings: Add sata port phy config parameters in ahci-ceva
  • From: Rob Herring
• [PATCH v2] cs5536: add support for IDE controller variant
  • From: Andrey Korolyov
• Re: [PATCH] cs5536: add support for IDE controller variant
  • From: Christoph Hellwig
• [PATCH] cs5536: add support for IDE controller variant
  • From: Andrey Korolyov
• [PATCH 2/2] ata: sata_gemini: Introduce explicit IDE pin control
  • From: Linus Walleij
• [PATCH 1/2] ata: sata_gemini: Retire custom pin control
  • From: Linus Walleij
• Re: [PATCH] ata: make ata_port_operations const
  • From: Bhumika Goyal
• Re: [PATCH] ata: make ata_port_operations const
  • From: Joe Perches
• Re: [PATCH] ata: make ata_port_operations const
  • From: Tejun Heo
• Re: [PATCH] ata: make ata_port_operations const
  • From: Bhumika Goyal
• Re: [PATCH] ata: make ata_port_operations const
  • From: Tejun Heo
• [PATCH] ata: make ata_port_operations const
  • From: Bhumika Goyal
• [PATCH v2 1/2] ata: mediatek: add support for MediaTek SATA controller
  • From: Ryder Lee
• [PATCH v2 2/2] dt-bindings: ata: add DT bindings for MediaTek SATA controller
  • From: Ryder Lee
• [PATCH v2 0/2] Add support for MediaTek AHCI SATA
  • From: Ryder Lee
• Re: [PATCH] ata: ahci_platform: Add shutdown handler
  • From: Tejun Heo
• [PATCH 0/9] Ata ceva patches
  • From: Michal Simek
• [PATCH 1/9] devicetree: bindings: Add sata port phy config parameters in ahci-ceva
  • From: Michal Simek
• [PATCH 3/9] ata: ceva: Add gen 3 mode support in driver
  • From: Michal Simek
• [PATCH 5/9] ata: ceva: Make RxWaterMark value as module parameter
  • From: Michal Simek
• [PATCH 6/9] ata: ceva: Add CCI support for SATA if CCI is enabled
  • From: Michal Simek
• [PATCH 8/9] ata: ceva: Correct the suspend and resume logic for SATA
  • From: Michal Simek
• [PATCH 4/9] ata: ceva: Disable Device Sleep capability
  • From: Michal Simek
• [PATCH 2/9] ata: ceva: Move sata port phy oob settings to device-tree
  • From: Michal Simek
• [PATCH 9/9] ata: ceva: Add SMMU support for SATA IP
  • From: Michal Simek
• [PATCH 7/9] ata: ceva: Correct the AXI bus configuration for SATA ports
  • From: Michal Simek
• [bug report] potential out of bounds in IDE
  • From: Dan Carpenter
• Re: [PATCH 005/102] ata: sata_gemini: explicitly request exclusive reset control
  • From: Tejun Heo
• Re: [PATCH 08/11] ata: Drop unnecessary static
  • From: Tejun Heo
• Re: [PATCH 005/102] ata: sata_gemini: explicitly request exclusive reset control
  • From: Linus Walleij
• Re: [PATCH 08/11] ata: Drop unnecessary static
  • From: Linus Walleij
• [PATCH v1 1/2] ata: mediatek: add support for MediaTek SATA controller
  • From: Ryder Lee
• [PATCH v1 2/2] dt-bindings: ata: add DT bindings for MediaTek SATA controller
  • From: Ryder Lee
• [PATCH v1 0/2] Add support for MediaTek AHCI SATA
  • From: Ryder Lee
• [PATCH v2 tip/core/rcu 08/10] drivers/ata: Replace spin_unlock_wait() with lock/unlock pair
  • From: Paul E. McKenney
• [GIT PULL] libata fixes for v4.13-rc3
  • From: Tejun Heo
• Re: [PATCH] libata: fix a couple of doc build warnings
  • From: Tejun Heo
• Re: [PATCH] powerpc/asm/cacheflush: Cleanup cacheflush function params
  • From: Christophe LEROY
• [PATCH] libata: fix a couple of doc build warnings
  • From: Jonathan Corbet
• Re: [PATCH 1/2] ata: mediatek: add support for MediaTek SATA controller
  • From: kbuild test robot
• Re: [PATCH 2/2] dt-bindings: ata: add DT bindings for MediaTek SATA controller
  • From: Ryder Lee
• Re: [PATCH 2/2] dt-bindings: ata: add DT bindings for MediaTek SATA controller
  • From: Sergei Shtylyov
• [PATCH 1/2] ata: mediatek: add support for MediaTek SATA controller
  • From: Ryder Lee
• [PATCH 0/2] Add support for MediaTek AHCI SATA
  • From: Ryder Lee
• [PATCH 2/2] dt-bindings: ata: add DT bindings for MediaTek SATA controller
  • From: Ryder Lee
• [PATCH tip/core/rcu 7/9] drivers/ata: Replace spin_unlock_wait() with lock/unlock pair
  • From: Paul E. McKenney
• Re: [PATCH] powerpc/asm/cacheflush: Cleanup cacheflush function params
  • From: Matt Brown
• [GIT] IDE
  • From: David Miller
• [PATCH] ata: ahci_platform: Add shutdown handler
  • From: Nate Watterson
• Re: [PATCH] powerpc/asm/cacheflush: Cleanup cacheflush function params
  • From: Michael Ellerman
• Re: [PATCH] powerpc/asm/cacheflush: Cleanup cacheflush function params
  • From: Geert Uytterhoeven
• Re: [PATCH] powerpc/asm/cacheflush: Cleanup cacheflush function params
  • From: Michael Ellerman
• Re: [PATCH] powerpc/asm/cacheflush: Cleanup cacheflush function params
  • From: Geert Uytterhoeven
• [PATCH] powerpc/asm/cacheflush: Cleanup cacheflush function params
  • From: Matt Brown
• [PATCH 004/102] ahci: st: explicitly request exclusive reset control
  • From: Philipp Zabel
• [PATCH 005/102] ata: sata_gemini: explicitly request exclusive reset control
  • From: Philipp Zabel
• [PATCH 006/102] ata: ahci_tegra: explicitly request exclusive reset control
  • From: Philipp Zabel
• Re: [PATCH] libata: array underflow in ata_find_dev()
  • From: Tejun Heo
• [PATCH] libata: array underflow in ata_find_dev()
  • From: Dan Carpenter