From: Anurag Kumar Vulisha <anurag.kumar.vulisha@xxxxxxxxxx> This patch sets gen 3 mode as default mode in ahci_ceva driver. Signed-off-by: Anurag Kumar Vulisha <anuragku@xxxxxxxxxx> Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx> --- Changes in v2: None drivers/ata/ahci_ceva.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/ata/ahci_ceva.c b/drivers/ata/ahci_ceva.c index 59de2ca1885c..aa32c8a0f083 100644 --- a/drivers/ata/ahci_ceva.c +++ b/drivers/ata/ahci_ceva.c @@ -60,6 +60,7 @@ #define PORT1_BASE 0x180 /* Port Control Register Bit Definitions */ +#define PORT_SCTL_SPD_GEN3 (0x3 << 4) #define PORT_SCTL_SPD_GEN2 (0x2 << 4) #define PORT_SCTL_SPD_GEN1 (0x1 << 4) #define PORT_SCTL_IPM (0x3 << 8) @@ -136,8 +137,8 @@ static void ahci_ceva_setup(struct ahci_host_priv *hpriv) tmp = PTC_RX_WM_VAL | PTC_RSVD; writel(tmp, mmio + AHCI_VEND_PTC); - /* Default to Gen 2 Speed and Gen 1 if Gen2 is broken */ - tmp = PORT_SCTL_SPD_GEN2 | PORT_SCTL_IPM; + /* Default to Gen 3 Speed and Gen 1 if Gen2 is broken */ + tmp = PORT_SCTL_SPD_GEN3 | PORT_SCTL_IPM; if (cevapriv->flags & CEVA_FLAG_BROKEN_GEN2) tmp = PORT_SCTL_SPD_GEN1 | PORT_SCTL_IPM; writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
