On Fri, 2017-07-28 at 12:20 +0300, Sergei Shtylyov wrote: > > +Required properties: > > + - compatible : Must be "mediatek,ahci". > > + - reg : Physical base addresses and length of register sets. > > + - interrupts : Interrupt associated with the SATA device. > > + - interrupt-names : Associated name must be: "hostc". > > + - clocks : The phandle for the clock. > > Your example shows that you need both phandle and specifier (afetr phandle). > > > + - clock-names : Associated name must be: "ahb", "axi", "asic", "rbc", "pm" > > + - phys : The phandle for the PHY port. > > Likewise. Oh yeah, I forgot about that. > > + - phy-names : Associated name must be: "sata-phy". > > + - ports-implemented : Mask that indicates which ports that the HBA supports > > + are available for software to use. Useful if PORTS_IMPL > > + is not programmed by the BIOS, which is true with some > > + embedded SOC's. > > An empty line wouldn't hurt here... Okay. > > +Optional properties: > > + - power-domains : A phandle and power domain specifier pair to the power > > + domain which is responsible for collapsing and restoring > > + power to the peripheral. > > + - resets : Must contain an entry for each entry in reset-names. > > + See ../reset/reset.txt for details. > > + - reset-names : Associated names must be: "axi-rst", "sw-rst", "reg-rst". > > + - mediatek,phy-mode : A phandle to the system controller, used to enable > > + SATA function. Thanks! Ryder. -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
