The Allwinner R40 SoC contains a SATA AHCI controller like the one in A10/A20 SoCs, however a reset control and two power supplies are added to it. Add a binding document for it. As a dedicated binding document is needed now for the A10/A20/R40 AHCI controller, drop the A10 compatible line from generic platform AHCI controller binding document. Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx> --- .../devicetree/bindings/ata/ahci-platform.txt | 1 - .../bindings/ata/allwinner,sun4i-a10-ahci.txt | 40 ++++++++++++++++++++++ 2 files changed, 40 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.txt diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index fedc213b5f1a..da6818b2c204 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -9,7 +9,6 @@ PHYs. Required properties: - compatible : compatible string, one of: - - "allwinner,sun4i-a10-ahci" - "brcm,iproc-ahci" - "hisilicon,hisi-ahci" - "cavium,octeon-7130-ahci" diff --git a/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.txt b/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.txt new file mode 100644 index 000000000000..0eea78c14ad3 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.txt @@ -0,0 +1,40 @@ +Allwinner A10/A20/R40 SoC SATA AHCI Controller + +Required properties: +- compatible : compatible string, one of: + - "allwinner,sun4i-a10-ahci" + - "allwinner,sun8i-r40-ahci" +- interrupts : the SATA IRQ +- reg : the register mapping +- clocks : the clocks needed by SATA controller, usually contains + an AHB clock and a mod clock + +Optional properties: +- target-supply : regulator for SATA target power + +Required properties for the following compatibles: + - "allwinner,sun8i-r40-ahci" +- resets : the reset control needed by SATA controller +- vdd1v2-supply : regulator for SATA controller's 1.2V VDD +- vdd2v5-supply : regulator for SATA controller's 2.5V VDD + + +Examples for A10: + ahci: sata@1c18000 { + compatible = "allwinner,sun4i-a10-ahci"; + reg = <0x01c18000 0x1000>; + interrupts = <56>; + clocks = <&pll6 0>, <&ahb_gates 25>; + target-supply = <®_ahci_5v>; + }; + +Examples for R40: + ahci: sata@1c18000 { + compatible = "allwinner,sun8i-r40-ahci"; + reg = <0x01c18000 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_SATA>, <&ccu CLK_BUS_SATA>; + resets = <&ccu RST_BUS_SATA>; + vdd1v2-supply = <®_eldo3>; + vdd2v5-supply = <®_dldo4>; + }; -- 2.13.6 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html