The patch below now only touches drivers/ide/ide-scan-pci.c.
It fixes a problem introduced via the PCI tree, so I'd be happy to
merge the fix as well, given an ack from you, Dave. Or you can merge
it yourself with my ack:
Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
It mentions that it fixes 30fdfb929e82 ("PCI: Add a call to
pci_assign_irq() in pci_device_probe()"), which appeared in v4.13.
But the problem wasn't actually exposed until 0e4c2eeb758a
("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ
mapping hooks"), which appeared in v4.14-rc1.
So as long as we get this into v4.14, I don't think we need a stable
backport to v4.13.
Note that there are other potential problems with the
ide_scan_pcidev() path. For example, the normal PCI probe path in
pci_device_probe() calls pcibios_alloc_irq(), which may do ACPI IRQ
setup and potentially change dev->irq. ide_scan_pcidev() does not do
that, so there may be cases where the driver gets the wrong IRQ.
On Mon, Oct 02, 2017 at 11:52:47AM +0100, Lorenzo Pieralisi wrote:
> Through struct pci_host_bridge->{map/swizzle}_irq() hooks is now
> possible to define IRQ mapping functions on a per PCI host bridge basis.
>
> Actual IRQ allocation is carried out by the pci_assign_irq() function in
> pci_device_probe() - to make sure a device is assigned an IRQ only if it
> is probed (ie match a driver); it retrieves a struct pci_host_bridge*
> for a given PCI device and through {map/swizzle}_irq() it carries out
> the PCI IRQ allocation.
>
> The code conversion to struct pci_host_bridge {map/swizzle}_irq() hooks
> and pci_assign_irq() to deal with legacy IRQs in
>
> commit 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in
> pci_device_probe()")
>
> did not take into account that the IDE subsystem relies on a special
> purpose IDE PCI layer, configured by CONFIG_IDEPCI_PCIBUS_ORDER to force
> devices probe ordering by sidestepping the core PCI bus layer entirely
> (and therefore pci_device_probe()) by executing the registered IDE PCI
> drivers probe routines (ie registered with ide_pci_register_driver())
> through ide_scan_pcidev().
>
> Since this IDE PCI specific probe mechanism bypasses the PCI core
> code generic probing (ie pci_device_probe()) it also misses the
> pci_assign_irq() call (among other PCI initialization functions);
> this triggers IDE PCI devices initialization failures caused
> by the missing IRQ allocation:
>
> ide0: disabled, no IRQ
> ide0: failed to initialize IDE interface
> ide0: disabling port
> cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
> CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057]
> cmd64x 0000:00:02.0: can't reserve resources
> CMD64x_IDE: probe of 0000:00:02.0 failed with error -16
> ide_generic: please use "probe_mask=0x3f" module parameter for probing
> all legacy ISA IDE ports
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x94/0xd0
> sysfs: cannot create duplicate filename '/class/ide_port/ide0'
> ...
>
> Trace:
> [<fffffc00003308a0>] __warn+0x160/0x190
> [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
> [<fffffc0000330928>] warn_slowpath_fmt+0x58/0x70
> [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
> [<fffffc0000486d40>] kernfs_path_from_node+0x30/0x60
> [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
> [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
> [<fffffc000048d010>] sysfs_do_create_link_sd.isra.2+0x100/0x120
> [<fffffc00005b9d64>] device_add+0x2a4/0x7c0
> [<fffffc00005ba5cc>] device_create_groups_vargs+0x14c/0x170
> [<fffffc00005ba518>] device_create_groups_vargs+0x98/0x170
> [<fffffc00005ba690>] device_create+0x50/0x70
> [<fffffc00005df36c>] ide_host_register+0x48c/0xa00
> [<fffffc00005df330>] ide_host_register+0x450/0xa00
> [<fffffc00005ba2a0>] device_register+0x20/0x50
> [<fffffc00005df330>] ide_host_register+0x450/0xa00
> [<fffffc00005df944>] ide_host_add+0x64/0xe0
> [<fffffc000079b41c>] kobject_uevent_env+0x16c/0x710
> [<fffffc0000310288>] do_one_initcall+0x68/0x260
> [<fffffc00007b13bc>] kernel_init+0x1c/0x1a0
> [<fffffc00007b13a0>] kernel_init+0x0/0x1a0
> [<fffffc0000311868>] ret_from_kernel_thread+0x18/0x20
> [<fffffc00007b13a0>] kernel_init+0x0/0x1a0
>
> ---[ end trace 24a70433c3e4d374 ]---
> ide0: disabling port
>
> Fix the IRQ allocation issue by adding a pci_assign_irq() call in the
> ide_scan_pcidev() function before probing the IDE PCI drivers, so that
> IRQs for a given PCI device are allocated for the IDE PCI drivers to
> use them for device configuration.
>
> Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
> Link: http://lkml.kernel.org/r/32ec730f-c1b0-5584-cd35-f8a809122b96@xxxxxxxxxxxx
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
> Reported-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> Cc: Richard Henderson <rth@xxxxxxxxxxx>
> Cc: Ivan Kokshaysky <ink@xxxxxxxxxxxxxxxxxxxx>
> Cc: David S. Miller <davem@xxxxxxxxxxxxx>
> Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
> Cc: Matt Turner <mattst88@xxxxxxxxx>
> ---
> v1->v2
>
> - Moved fix from PCI core code to IDE subsystem following further
> debugging and mailing list discussions
> - Rebased against v4.14-rc3
>
> drivers/ide/ide-scan-pci.c | 13 +++++++++----
> 1 file changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/ide/ide-scan-pci.c b/drivers/ide/ide-scan-pci.c
> index 86aa88a..acf8748 100644
> --- a/drivers/ide/ide-scan-pci.c
> +++ b/drivers/ide/ide-scan-pci.c
> @@ -56,6 +56,7 @@ static int __init ide_scan_pcidev(struct pci_dev *dev)
> {
> struct list_head *l;
> struct pci_driver *d;
> + int ret;
>
> list_for_each(l, &ide_pci_drivers) {
> d = list_entry(l, struct pci_driver, node);
> @@ -63,10 +64,14 @@ static int __init ide_scan_pcidev(struct pci_dev *dev)
> const struct pci_device_id *id =
> pci_match_id(d->id_table, dev);
>
> - if (id != NULL && d->probe(dev, id) >= 0) {
> - dev->driver = d;
> - pci_dev_get(dev);
> - return 1;
> + if (id != NULL) {
> + pci_assign_irq(dev);
> + ret = d->probe(dev, id);
> + if (ret >= 0) {
> + dev->driver = d;
> + pci_dev_get(dev);
> + return 1;
> + }
> }
> }
> }
> --
> 2.4.12
>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
