RE: [PATCH V6 1/7] dt-bindings: tegra: add binding documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




>-----Original Message-----
>From: Mikko Perttunen [mailto:cyndis@xxxxxxxx]
>Sent: Tuesday, January 23, 2018 9:02 PM
>To: Preetham Chandru <pchandru@xxxxxxxxxx>; thierry.reding@xxxxxxxxx;
>tj@xxxxxxxxxx
>Cc: preetham260@xxxxxxxxx; linux-tegra@xxxxxxxxxxxxxxx; linux-
>ide@xxxxxxxxxxxxxxx; Venu Byravarasu <vbyravarasu@xxxxxxxxxx>; Pavan
>Kunapuli <pkunapuli@xxxxxxxxxx>
>Subject: Re: [PATCH V6 1/7] dt-bindings: tegra: add binding documentation
>
>Also the commit subject needs to specify it's about ahci-tegra.
>
Okay.

>On 01/23/2018 05:30 PM, Mikko Perttunen wrote:
>> On 01/09/2018 09:17 AM, Preetham Chandru Ramchandra wrote:
>>> From: Preetham Ramchandra <pchandru@xxxxxxxxxx>
>>>
>>> This adds bindings documentation for the AHCI controller on Tegra210
>>>
>>> Signed-off-by: Preetham Chandru R <pchandru@xxxxxxxxxx>
>>> ---
>>> v4:
>>> * changed the commit message
>>> * changed 'sata-cold' reset to mandatory for t210 and t124
>>> * Removed the regulators for T210 since these regulators
>>>    will be enabled in phy driver.
>>> v3:
>>> * Add AUX register.
>>> v2:
>>> * change cml1, pll_e and phy regulators as optional
>>>    for T210.
>>> ---
>>>   .../bindings/ata/nvidia,tegra124-ahci.txt          | 38
>>> ++++++++++++++--------
>>>   1 file changed, 25 insertions(+), 13 deletions(-)
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
>>> b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
>>> index 66c83c3e8915..df4dc2c78ee8 100644
>>> --- a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
>>> +++ b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
>>> @@ -1,20 +1,19 @@
>>> -Tegra124 SoC SATA AHCI controller
>>> +Tegra SoC SATA AHCI controller
>>>   Required properties :
>>> -- compatible : For Tegra124, must contain "nvidia,tegra124-ahci".
>>> Otherwise,
>>> -  must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where
>>> <chip>
>>> -  is tegra132.
>>> -- reg : Should contain 2 entries:
>>> +- compatible : Must be one of:
>>> +  - Tegra124 : "nvidia,tegra124-ahci"
>>> +  - Tegra210 : "nvidia,tegra210-ahci"
>>> +- reg : Should contain 3 entries:
>>>     - AHCI register set (SATA BAR5)
>>>     - SATA register set
>>> +  - Tegra210 : AUX register set
>>>   - interrupts : Defines the interrupt used by SATA
>>>   - clocks : Must contain an entry for each entry in clock-names.
>>>     See ../clocks/clock-bindings.txt for details.
>>>   - clock-names : Must include the following entries:
>>>     - sata
>>>     - sata-oob
>>> -  - cml1
>>> -  - pll_e
>>>   - resets : Must contain an entry for each entry in reset-names.
>>>     See ../reset/reset.txt for details.
>>>   - reset-names : Must include the following entries:
>>> @@ -24,9 +23,22 @@ Required properties :
>>>   - phys : Must contain an entry for each entry in phy-names.
>>>     See ../phy/phy-bindings.txt for details.
>>>   - phy-names : Must include the following entries:
>>> -  - sata-phy : XUSB PADCTL SATA PHY
>>> -- hvdd-supply : Defines the SATA HVDD regulator
>>> -- vddio-supply : Defines the SATA VDDIO regulator
>>> -- avdd-supply : Defines the SATA AVDD regulator
>>> -- target-5v-supply : Defines the SATA 5V power regulator
>>> -- target-12v-supply : Defines the SATA 12V power regulator
>>> +  - For T124:
>>> +    - sata-phy : XUSB PADCTL SATA PHY
>>> +  - For T210:
>>> +    - sata-0
>>> +- For T124:
>>> +  - hvdd-supply : Defines the SATA HVDD regulator
>>> +  - vddio-supply : Defines the SATA VDDIO regulator
>>> +  - avdd-supply : Defines the SATA AVDD regulator
>>> +  - target-5v-supply : Defines the SATA 5V power regulator
>>> +  - target-12v-supply : Defines the SATA 12V power regulator
>>> +
>>> +Optional properties:
>>> +- clock-names :
>>> +  - cml1 :
>>> +    cml1 clock is required by phy so it is optional to define
>>> +    here as phy driver will be enabling this clock.
>>> +  - pll_e :
>>> +    pll_e is the parent of cml1 clock so it is optional to define
>>> +    here as phy driver will be enabling this clock.
>>>
>>
>> We should drop the pll_e here since CCF should handle that
>> automatically as CML1 is a child clock of it. I also had some
>> primarily cosmetic change suggestions to this in v5. I'd still like to
>> see those go in - it's of course possible to also apply these changes
>> while applying the patch.
>>
Okay

>> Mikko
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-tegra"
>> in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo
>> info at  http://vger.kernel.org/majordomo-info.html
��.n��������+%������w��{.n�����{��'^�)��jg��������ݢj����G�������j:+v���w�m������w�������h�����٥




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux