RE: [PATCH V6 2/7] arm64: tegra: Enable AHCI on Jetson TX1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Okay, will change the commit message for now as suggested

>-----Original Message-----
>From: Mikko Perttunen [mailto:cyndis@xxxxxxxx]
>Sent: Tuesday, January 23, 2018 9:04 PM
>To: Preetham Chandru <pchandru@xxxxxxxxxx>; thierry.reding@xxxxxxxxx;
>tj@xxxxxxxxxx
>Cc: preetham260@xxxxxxxxx; linux-tegra@xxxxxxxxxxxxxxx; linux-
>ide@xxxxxxxxxxxxxxx; Venu Byravarasu <vbyravarasu@xxxxxxxxxx>; Pavan
>Kunapuli <pkunapuli@xxxxxxxxxx>
>Subject: Re: [PATCH V6 2/7] arm64: tegra: Enable AHCI on Jetson TX1
>
>I have usually split the change in chip .dtsi and board .dtsi/.dts in separate
>commits. I don't know if that's necessary though.
>
>This does however require a commit message, like
>
>   Add sata node to the Tegra210 device tree, and enable the device and
>   assign board-specific properties on Jetson TX1.
>
>Mikko
>
>On 01/09/2018 09:17 AM, Preetham Chandru Ramchandra wrote:
>> From: Preetham Ramchandra <pchandru@xxxxxxxxxx>
>>
>> Signed-off-by: Preetham Chandru R <pchandru@xxxxxxxxxx>
>> ---
>> v4:
>> * Fixed missing space after 'AUX'
>> ---
>>   arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi |  6 ++++++
>>   arch/arm64/boot/dts/nvidia/tegra210.dtsi       | 16 ++++++++++++++++
>>   2 files changed, 22 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>> b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>> index d67ef4319f3b..2aa2979cd6b5 100644
>> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>> @@ -1325,6 +1325,12 @@
>>   		status = "okay";
>>   	};
>>
>> +	sata@70020000 {
>> +		status = "okay";
>> +		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
>> +		phy-names = "sata-0";
>> +	};
>> +
>>   	padctl@7009f000 {
>>   		status = "okay";
>>
>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>> b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>> index 9c2402108772..bf72db5386a5 100644
>> --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>> +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>> @@ -798,6 +798,22 @@
>>   		#iommu-cells = <1>;
>>   	};
>>
>> +	sata@70020000 {
>> +		compatible = "nvidia,tegra210-ahci";
>> +		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
>> +		      <0x0 0x70020000 0x0 0x7000>, /* SATA */
>> +		      <0x0 0x70001100 0x0 0x1000>; /* SATA AUX */
>> +		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
>> +		clocks = <&tegra_car TEGRA210_CLK_SATA>,
>> +			<&tegra_car TEGRA210_CLK_SATA_OOB>;
>> +		clock-names = "sata", "sata-oob";
>> +		resets = <&tegra_car 124>,
>> +			 <&tegra_car 123>,
>> +			 <&tegra_car 129>;
>> +		reset-names = "sata", "sata-oob", "sata-cold";
>> +		status = "disabled";
>> +	};
>> +
>>   	hda@70030000 {
>>   		compatible = "nvidia,tegra210-hda", "nvidia,tegra30-hda";
>>   		reg = <0x0 0x70030000 0x0 0x10000>;
>>
��.n��������+%������w��{.n�����{��'^�)��jg��������ݢj����G�������j:+v���w�m������w�������h�����٥




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux