Hello, On Thu, Aug 17, 2017 at 11:24:22AM +0200, Bernd Schubert wrote: > > More concerning is the fact that these undetected errors can make their > > way even when the higher application consistently calls sync() and/or > > fsync. In other words, it seems than even acknowledged writes can fail > > in this manner (and this is consistent with the first machine corrupting > > its filesystem due to journal trashing - XFS journal surely uses sync() > > where appropriate). The mechanism seems the following: > > > > - an higher layer application issue sync(); > > - a write barrier is generated; > > - a first FLUSH CACHE command is sent to the disk; > > - data are written to the disk's DRAM cache; > > - power is lost! The volatile cache lose its content; > > - power is re-established and the disk become responsive again; > > - a second FLUSH CACHE command is sent to the disk; > > - the disk acks each SATA command, but real data are lost. Recovered errors aren't reported as IO errors and at least from link state proper there's no way for the driver to tell apart link glitches and buffer-erasing power issues. > > Now, I have few questions: > > - is the above explanation plausible, or I am (horribly) missing something? For the most part, yes. To be more accurate, the failure is coming from libata not being able to tell apart link glitches from the device getting reset due to power issues. > > - why the scsi midlevel does not respond to a power loss event by > > immediately offlining the disks? Because we don't wanna be ditching disks on temporary link glitches, which do happen once in a while. > > - is the scsi midlevel behavior configurable (I know I can lower eh > > timeout, but is this the right solution)? > > - how to deal with this problem (other than being 100% sure power is > > never lost by any disks)? So, the right way to deal with the problem probably is making use of the SMART counter which indicates power loss events and verify that the counter hasn't increased over link issues. If it changed, the device should be detached and re-probed, which will make it come back as a different block device. Unfortunately, I haven't had the chance to actually implement that. Thanks. -- tejun -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
