[+cc linux-pci] On Tue, Oct 03, 2017 at 02:17:13PM +0200, Bartlomiej Zolnierkiewicz wrote: > Recent pci_assign_irq() changes uncovered a problem with missing > freeing of PCI BARs on PCI IDE host initialization failure: > > ide0: disabled, no IRQ > ide0: failed to initialize IDE interface > ide0: disabling port > cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07) > CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057] > cmd64x 0000:00:02.0: can't reserve resources > CMD64x_IDE: probe of 0000:00:02.0 failed with error -16 > > Fix the problem by adding missing freeing of PCI BARs to > ide_setup_pci_controller() and ide_pci_init_two(). > > Link: http://lkml.kernel.org/r/32ec730f-c1b0-5584-cd35-f8a809122b96@xxxxxxxxxxxx > Reported-by: Guenter Roeck <linux@xxxxxxxxxxxx> > Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> > Cc: Richard Henderson <rth@xxxxxxxxxxx> > Cc: Ivan Kokshaysky <ink@xxxxxxxxxxxxxxxxxxxx> > Cc: Guenter Roeck <linux@xxxxxxxxxxxx> > Cc: Matt Turner <mattst88@xxxxxxxxx> > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx> Applied with Guenter's tested-by to for-linus for v4.14, thanks! > --- > This should fix problem with reserving PCI resources on a secondary > PCI device probe attempt (please test when pci_assign_irq() fix is > not present and "[PATCH] ide: add missing hwif->portdev freeing on > hwif_init() failure" is applied). > > v2: > - Added missing 'goto out;' in ide_setup_pci_controller() > > drivers/ide/setup-pci.c | 63 ++++++++++++++++++++++++++++++------------------ > 1 file changed, 40 insertions(+), 23 deletions(-) > > Index: b/drivers/ide/setup-pci.c > =================================================================== > --- a/drivers/ide/setup-pci.c 2017-10-03 14:13:02.391779813 +0200 > +++ b/drivers/ide/setup-pci.c 2017-10-03 14:13:59.051779867 +0200 > @@ -179,6 +179,7 @@ EXPORT_SYMBOL_GPL(ide_setup_pci_noise); > /** > * ide_pci_enable - do PCI enables > * @dev: PCI device > + * @bars: PCI BARs mask > * @d: IDE port info > * > * Enable the IDE PCI device. We attempt to enable the device in full > @@ -189,9 +190,10 @@ EXPORT_SYMBOL_GPL(ide_setup_pci_noise); > * Returns zero on success or an error code > */ > > -static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d) > +static int ide_pci_enable(struct pci_dev *dev, int bars, > + const struct ide_port_info *d) > { > - int ret, bars; > + int ret; > > if (pci_enable_device(dev)) { > ret = pci_enable_device_io(dev); > @@ -216,18 +218,6 @@ static int ide_pci_enable(struct pci_dev > goto out; > } > > - if (d->host_flags & IDE_HFLAG_SINGLE) > - bars = (1 << 2) - 1; > - else > - bars = (1 << 4) - 1; > - > - if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) { > - if (d->host_flags & IDE_HFLAG_CS5520) > - bars |= (1 << 2); > - else > - bars |= (1 << 4); > - } > - > ret = pci_request_selected_regions(dev, bars, d->name); > if (ret < 0) > printk(KERN_ERR "%s %s: can't reserve resources\n", > @@ -403,6 +393,7 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, > /** > * ide_setup_pci_controller - set up IDE PCI > * @dev: PCI device > + * @bars: PCI BARs mask > * @d: IDE port info > * @noisy: verbose flag > * > @@ -411,7 +402,7 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, > * and enables it if need be > */ > > -static int ide_setup_pci_controller(struct pci_dev *dev, > +static int ide_setup_pci_controller(struct pci_dev *dev, int bars, > const struct ide_port_info *d, int noisy) > { > int ret; > @@ -420,7 +411,7 @@ static int ide_setup_pci_controller(stru > if (noisy) > ide_setup_pci_noise(dev, d); > > - ret = ide_pci_enable(dev, d); > + ret = ide_pci_enable(dev, bars, d); > if (ret < 0) > goto out; > > @@ -428,16 +419,20 @@ static int ide_setup_pci_controller(stru > if (ret < 0) { > printk(KERN_ERR "%s %s: error accessing PCI regs\n", > d->name, pci_name(dev)); > - goto out; > + goto out_free_bars; > } > if (!(pcicmd & PCI_COMMAND_IO)) { /* is device disabled? */ > ret = ide_pci_configure(dev, d); > if (ret < 0) > - goto out; > + goto out_free_bars; > printk(KERN_INFO "%s %s: device enabled (Linux)\n", > d->name, pci_name(dev)); > } > > + goto out; > + > +out_free_bars: > + pci_release_selected_regions(dev, bars); > out: > return ret; > } > @@ -540,13 +535,28 @@ int ide_pci_init_two(struct pci_dev *dev > { > struct pci_dev *pdev[] = { dev1, dev2 }; > struct ide_host *host; > - int ret, i, n_ports = dev2 ? 4 : 2; > + int ret, i, n_ports = dev2 ? 4 : 2, bars; > struct ide_hw hw[4], *hws[] = { NULL, NULL, NULL, NULL }; > > + if (d->host_flags & IDE_HFLAG_SINGLE) > + bars = (1 << 2) - 1; > + else > + bars = (1 << 4) - 1; > + > + if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) { > + if (d->host_flags & IDE_HFLAG_CS5520) > + bars |= (1 << 2); > + else > + bars |= (1 << 4); > + } > + > for (i = 0; i < n_ports / 2; i++) { > - ret = ide_setup_pci_controller(pdev[i], d, !i); > - if (ret < 0) > + ret = ide_setup_pci_controller(pdev[i], bars, d, !i); > + if (ret < 0) { > + if (i == 1) > + pci_release_selected_regions(pdev[0], bars); > goto out; > + } > > ide_pci_setup_ports(pdev[i], d, &hw[i*2], &hws[i*2]); > } > @@ -554,7 +564,7 @@ int ide_pci_init_two(struct pci_dev *dev > host = ide_host_alloc(d, hws, n_ports); > if (host == NULL) { > ret = -ENOMEM; > - goto out; > + goto out_free_bars; > } > > host->dev[0] = &dev1->dev; > @@ -576,7 +586,7 @@ int ide_pci_init_two(struct pci_dev *dev > * do_ide_setup_pci_device() on the first device! > */ > if (ret < 0) > - goto out; > + goto out_free_bars; > > /* fixup IRQ */ > if (ide_pci_is_in_compatibility_mode(pdev[i])) { > @@ -589,6 +599,13 @@ int ide_pci_init_two(struct pci_dev *dev > ret = ide_host_register(host, d, hws); > if (ret) > ide_host_free(host); > + else > + goto out; > + > +out_free_bars: > + i = n_ports / 2; > + while (i--) > + pci_release_selected_regions(pdev[i], bars); > out: > return ret; > } > -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
