[PATCH 3/9] ata: ceva: Add gen 3 mode support in driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Anurag Kumar Vulisha <anurag.kumar.vulisha@xxxxxxxxxx>

This patch sets gen 3 mode as default mode in ahci_ceva driver.

Signed-off-by: Anurag Kumar Vulisha <anuragku@xxxxxxxxxx>
Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
---

 drivers/ata/ahci_ceva.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/ahci_ceva.c b/drivers/ata/ahci_ceva.c
index 59de2ca1885c..aa32c8a0f083 100644
--- a/drivers/ata/ahci_ceva.c
+++ b/drivers/ata/ahci_ceva.c
@@ -60,6 +60,7 @@
 #define PORT1_BASE	0x180
 
 /* Port Control Register Bit Definitions */
+#define PORT_SCTL_SPD_GEN3	(0x3 << 4)
 #define PORT_SCTL_SPD_GEN2	(0x2 << 4)
 #define PORT_SCTL_SPD_GEN1	(0x1 << 4)
 #define PORT_SCTL_IPM		(0x3 << 8)
@@ -136,8 +137,8 @@ static void ahci_ceva_setup(struct ahci_host_priv *hpriv)
 		tmp = PTC_RX_WM_VAL | PTC_RSVD;
 		writel(tmp, mmio + AHCI_VEND_PTC);
 
-		/* Default to Gen 2 Speed and Gen 1 if Gen2 is broken */
-		tmp = PORT_SCTL_SPD_GEN2 | PORT_SCTL_IPM;
+		/* Default to Gen 3 Speed and Gen 1 if Gen2 is broken */
+		tmp = PORT_SCTL_SPD_GEN3 | PORT_SCTL_IPM;
 		if (cevapriv->flags & CEVA_FLAG_BROKEN_GEN2)
 			tmp = PORT_SCTL_SPD_GEN1 | PORT_SCTL_IPM;
 		writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i);
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux