On Mon, Aug 21, 2017 at 01:17:17PM +0200, Michal Simek wrote: > From: Anurag Kumar Vulisha <anurag.kumar.vulisha@xxxxxxxxxx> > > In SATA Speed negotiation happens with OOB(Out of Band) signals. These OOB > signal timing values are configured through vendor specific registers in the > SATA controller. These OOB timings depends on the generator and detector clock > frequency, which varies from board to board (ex: ep108 and zc1751 has different > clock frequencies). > To avoid maintaing these OOB settings in the driver, it is better to move these > settings to the device-tree node and read from the device-tree. > > This patch does the same. > > Signed-off-by: Anurag Kumar Vulisha <anuragku@xxxxxxxxxx> > Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx> Applied to libata/for-4.15. Thanks. -- tejun -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
