Re: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 12, 2018 at 10:56:40PM +0530, Preetham Chandru Ramchandra wrote:
> From: Preetham Ramchandra <pchandru@xxxxxxxxxx>
> 
> This adds bindings documentation for the
> AHCI controller on Tegra210

Please avoid lines that are too short. They shouldn't exceed 72
characters, but you're supposed to make fully use of those. Also the
above is a sentence, so should end with a '.'.

> diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
> index 66c83c3e8915..0f4520a00716 100644
> --- a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
> +++ b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
> @@ -1,20 +1,19 @@
> -Tegra124 SoC SATA AHCI controller
> +Tegra SoC SATA AHCI controller
>  
>  Required properties :
> -- compatible : For Tegra124, must contain "nvidia,tegra124-ahci".  Otherwise,
> -  must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip>
> -  is tegra132.
> -- reg : Should contain 2 entries:
> +- compatible : Must be one of:
> +  - Tegra124 : "nvidia,tegra124-ahci"
> +  - Tegra210 : "nvidia,tegra210-ahci"
> +- reg : Should contain 3 entries:
>    - AHCI register set (SATA BAR5)
>    - SATA register set
> +  - AUX register set
>  - interrupts : Defines the interrupt used by SATA
>  - clocks : Must contain an entry for each entry in clock-names.
>    See ../clocks/clock-bindings.txt for details.
>  - clock-names : Must include the following entries:
>    - sata
>    - sata-oob
> -  - cml1
> -  - pll_e
>  - resets : Must contain an entry for each entry in reset-names.
>    See ../reset/reset.txt for details.
>  - reset-names : Must include the following entries:
> @@ -24,9 +23,19 @@ Required properties :
>  - phys : Must contain an entry for each entry in phy-names.
>    See ../phy/phy-bindings.txt for details.
>  - phy-names : Must include the following entries:
> -  - sata-phy : XUSB PADCTL SATA PHY
> -- hvdd-supply : Defines the SATA HVDD regulator
> -- vddio-supply : Defines the SATA VDDIO regulator
> -- avdd-supply : Defines the SATA AVDD regulator
> -- target-5v-supply : Defines the SATA 5V power regulator
> -- target-12v-supply : Defines the SATA 12V power regulator
> +  - For T124:
> +    - sata-phy : XUSB PADCTL SATA PHY
> +  - For T210:
> +    - sata-0
> +- For T124:

Can we please use TegraXYZ here? I find it useful to be consistent here
because those will show up if I grep for "tegra", whereas TXYZ won't.

Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux