In the case where power is cut on suspend the SATA PHY state needs to be
suspended on resume.
This is the case on the Salvator-X board with the r8a7795 or r8a7796 SoC.
In that environment it has been observed that SATA partitions cannot not be
accessed on resume.
Based on work by Khiem Nguyen.
Cc: Khiem Nguyen <khiem.nguyen.xt@xxxxxxxxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
* Compile and boot tested only
---
drivers/ata/sata_rcar.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index 5d38245a7a73..4f4f7788a6cf 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -969,16 +969,9 @@ static int sata_rcar_resume(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
struct sata_rcar_priv *priv = host->private_data;
- void __iomem *base = priv->base;
clk_prepare_enable(priv->clk);
-
- /* ack and mask */
- iowrite32(0, base + SATAINTSTAT_REG);
- iowrite32(0x7ff, base + SATAINTMASK_REG);
- /* enable interrupts */
- iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
-
+ sata_rcar_init_controller(host);
ata_host_resume(host);
return 0;
--
2.7.0.rc3.207.g0ac5344
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
