Re: [PATCH v2 2/2] ata: ahci: add support for DaVinci DM816 SATA controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2017-03-14 12:04 GMT+01:00 Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>:
> This SATA controller is quite similar to the one present on the DA850
> SoC, but the PHY configuration is different and it supports two HBA
> ports.
>
> The IP suffers from the same PMP issue the DA850 does - if we enable
> PMP but don't use it - softreset fails. Appropriate workaround was
> implemented in this driver as well.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> ---
>  drivers/ata/Kconfig      |   9 +++
>  drivers/ata/Makefile     |   1 +
>  drivers/ata/ahci_dm816.c | 200 +++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 210 insertions(+)
>  create mode 100644 drivers/ata/ahci_dm816.c
>

Hi Tejun,

the DT bindings have been acked by Rob Herring and Tony Lindgren has
picked up the arch/arm patches. If there are no objections, could you
merge this driver and DT bindings for 4.12?

Thanks,
Bartosz
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux