Linux IDE Archive

• Thread Index

• [RESEND][PATCH v2] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
  • From: Rameshwar Prasad Sahu
• Re: [PATCH] cdrom: Make device operations read-only
  • From: David Miller
• [PATCH] cdrom: Make device operations read-only
  • From: Kees Cook
• DMA issue caused by vmapped stacks
  • From: Guillermo Amaral
• Re: [PATCH] PCI:MSI Return -ENOSPC when requested vectors is not enough
  • From: Bjorn Helgaas
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Tejun Heo
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: tedheadster
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Gwendal Grignou
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Tejun Heo
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Gwendal Grignou
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Michael Schmitz
• Re: remove the cmd_type field from struct request
  • From: Sergei Shtylyov
• Re: remove the cmd_type field from struct request
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Geert Uytterhoeven
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Finn Thain
• Re: remove the cmd_type field from struct request
  • From: Hannes Reinecke
• Re: for-4.10-fixes branch
  • From: Damien Le Moal
• Re: remove the cmd_type field from struct request
  • From: Martin K. Petersen
• Re: remove the cmd_type field from struct request
  • From: Jens Axboe
• Re: remove the cmd_type field from struct request
  • From: Jens Axboe
• Re: remove the cmd_type field from struct request
  • From: Sergei Shtylyov
• Re: remove the cmd_type field from struct request
  • From: James Bottomley
• Re: for-4.10-fixes branch
  • From: Tejun Heo
• Re: remove the cmd_type field from struct request
  • From: Jens Axboe
• [GIT PULL] libata fixes for v4.10-rc6
  • From: Tejun Heo
• [PATCH 05/10] mspro_block: remove pointless prep_fn
  • From: Christoph Hellwig
• [PATCH 07/10] nbd: move request validity checking into nbd_send_cmd
  • From: Christoph Hellwig
• remove the cmd_type field from struct request
  • From: Christoph Hellwig
• [PATCH 06/10] nbd: remove REQ_TYPE_DRV_PRIV leftovers
  • From: Christoph Hellwig
• [PATCH 04/10] ms_block: remove pointless prep_fn
  • From: Christoph Hellwig
• [PATCH 01/10] scm_blk: remove unneeded REQ_TYPE_FS check
  • From: Christoph Hellwig
• [PATCH 03/10] mmc: remove pointless request type check in mmc_prep_request
  • From: Christoph Hellwig
• [PATCH 02/10] ѕd: remove pointless REQ_TYPE_FS check
  • From: Christoph Hellwig
• Re: [PATCH 09/10] ide: don't abuse cmd_type
  • From: David Miller
• [PATCH 10/10] block: fold cmd_type into the REQ_OP_ space
  • From: Christoph Hellwig
• [PATCH 08/10] block: introduce blk_rq_is_passthrough
  • From: Christoph Hellwig
• [PATCH 09/10] ide: don't abuse cmd_type
  • From: Christoph Hellwig
• Re: [PATCH v7 11/14] sata: ahci-da850: un-hardcode the MPY bits
  • From: Sekhar Nori
• Re: [PATCH v7 03/14] ARM: davinci: add a clock lookup entry for the SATA clock
  • From: Sekhar Nori
• for-4.10-fixes branch
  • From: Damien Le Moal
• [PATCH v7 05/14] ARM: davinci: da850: add con_id for the SATA clock
  • From: Bartosz Golaszewski
• [PATCH v7 06/14] ARM: davinci: da850: model the SATA refclk
  • From: Bartosz Golaszewski
• [PATCH v7 02/14] ARM: davinci_all_defconfig: enable SATA modules
  • From: Bartosz Golaszewski
• [PATCH v7 13/14] ARM: dts: da850: add the SATA node
  • From: Bartosz Golaszewski
• [PATCH v7 03/14] ARM: davinci: add a clock lookup entry for the SATA clock
  • From: Bartosz Golaszewski
• [PATCH v7 04/14] sata: ahci-da850: get the sata clock using a connection id
  • From: Bartosz Golaszewski
• [PATCH v7 14/14] ARM: dts: da850-lcdk: enable the SATA node
  • From: Bartosz Golaszewski
• [PATCH v7 09/14] sata: ahci: export ahci_do_hardreset() locally
  • From: Bartosz Golaszewski
• [PATCH v7 11/14] sata: ahci-da850: un-hardcode the MPY bits
  • From: Bartosz Golaszewski
• [PATCH v7 00/14] ARM: da850-lcdk: add SATA support
  • From: Bartosz Golaszewski
• [PATCH v7 01/14] devicetree: bindings: add bindings for ahci-da850
  • From: Bartosz Golaszewski
• [PATCH v7 07/14] sata: ahci-da850: add device tree match table
  • From: Bartosz Golaszewski
• [PATCH v7 12/14] ARM: davinci: remove BUG_ON() from da850_register_sata()
  • From: Bartosz Golaszewski
• [PATCH v7 08/14] sata: ahci-da850: implement a workaround for the softreset quirk
  • From: Bartosz Golaszewski
• [PATCH v7 10/14] sata: ahci-da850: add a workaround for controller instability
  • From: Bartosz Golaszewski
• Re: [PATCH v6 01/14] devicetree: bindings: add bindings for ahci-da850
  • From: Rob Herring
• Re: [PATCH v6 05/14] ARM: davinci: da850: add con_id for the SATA clock
  • From: Sekhar Nori
• Re: [PATCH v6 05/14] ARM: davinci: da850: add con_id for the SATA clock
  • From: Bartosz Golaszewski
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Michael Schmitz
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: tedheadster
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Finn Thain
• Re: [PATCH v6 05/14] ARM: davinci: da850: add con_id for the SATA clock
  • From: Sekhar Nori
• Re: [PATCH v6 05/14] ARM: davinci: da850: add con_id for the SATA clock
  • From: Grygorii Strashko
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Geert Uytterhoeven
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Finn Thain
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Tejun Heo
• Re: [PATCH] ata: pata_of_platform: using of_property_read_u32() helper
  • From: Tejun Heo
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Tejun Heo
• [PATCH] ata: pata_of_platform: using of_property_read_u32() helper
  • From: Kefeng Wang
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: tedheadster
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Gwendal Grignou
• Re: [PATCH v2] libata:pata_atiixp: Don't use unconnected secondary port on SB600/SB700
  • From: Tejun Heo
• Re: [PATCH v2] libata-sff: Don't scan disabled ports when checking for legacy mode.
  • From: Tejun Heo
• [PATCH] pata_octeon_cf: remove unused local variables from octeon_cf_set_piomode()
  • From: tj@xxxxxxxxxx
• [PATCH v6 04/14] sata: ahci-da850: get the sata clock using a connection id
  • From: Bartosz Golaszewski
• [PATCH v6 12/14] ARM: davinci: remove BUG_ON() from da850_register_sata()
  • From: Bartosz Golaszewski
• [PATCH v6 13/14] ARM: dts: da850: add the SATA node
  • From: Bartosz Golaszewski
• [PATCH v6 08/14] sata: ahci-da850: implement a workaround for the softreset quirk
  • From: Bartosz Golaszewski
• [PATCH v6 10/14] sata: ahci-da850: add a workaround for controller instability
  • From: Bartosz Golaszewski
• [PATCH v6 14/14] ARM: dts: da850-lcdk: enable the SATA node
  • From: Bartosz Golaszewski
• [PATCH v6 11/14] sata: ahci-da850: un-hardcode the MPY bits
  • From: Bartosz Golaszewski
• [PATCH v6 05/14] ARM: davinci: da850: add con_id for the SATA clock
  • From: Bartosz Golaszewski
• [PATCH v6 06/14] ARM: davinci: da850: model the SATA refclk
  • From: Bartosz Golaszewski
• [PATCH v6 01/14] devicetree: bindings: add bindings for ahci-da850
  • From: Bartosz Golaszewski
• [PATCH v6 07/14] sata: ahci-da850: add device tree match table
  • From: Bartosz Golaszewski
• [PATCH v6 03/14] ARM: davinci: add a clock lookup entry for the SATA clock
  • From: Bartosz Golaszewski
• [PATCH v6 02/14] ARM: davinci_all_defconfig: enable SATA modules
  • From: Bartosz Golaszewski
• [PATCH v6 09/14] sata: ahci: export ahci_do_hardreset() locally
  • From: Bartosz Golaszewski
• [PATCH v6 00/14] ARM: da850-lcdk: add SATA support
  • From: Bartosz Golaszewski
• Re: [PATCH v5 01/14] devicetree: bindings: add bindings for ahci-da850
  • From: Rob Herring
• Re: [PATCH] libata-sff: Don't scan disabled ports when checking for legacy mode.
  • From: Sergei Shtylyov
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Michael Schmitz
• Re: libata-sff: Don't scan disabled ports when checking for legacy mode.
  • From: Darren Stevens
• [PATCH v2] libata-sff: Don't scan disabled ports when checking for legacy mode.
  • From: Darren Stevens
• [PATCH v2] libata:pata_atiixp: Don't use unconnected secondary port on SB600/SB700
  • From: Darren Stevens
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Finn Thain
• Re: [PATCH] libata:pata_atiixp: Don't use unconnected secondary port on SB600/SB700
  • From: Tejun Heo
• Re: [PATCH] libata-sff: Don't scan disabled ports when checking for legacy mode.
  • From: Tejun Heo
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Tejun Heo
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Tejun Heo
• [PATCH] libata:pata_atiixp: Don't use unconnected secondary port on SB600/SB700
  • From: Darren Stevens
• [PATCH] libata-sff: Don't scan disabled ports when checking for legacy mode.
  • From: Darren Stevens
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: tedheadster
• Re: [PATCH v5 01/14] devicetree: bindings: add bindings for ahci-da850
  • From: Sekhar Nori
• Re: [PATCH v5 00/14] ARM: da850-lcdk: add SATA support
  • From: Tejun Heo
• Re: [PATCH v5 00/14] ARM: da850-lcdk: add SATA support
  • From: Sekhar Nori
• Re: [PATCH v5 00/14] ARM: da850-lcdk: add SATA support
  • From: Sekhar Nori
• Re: [PATCH v5 00/14] ARM: da850-lcdk: add SATA support
  • From: Bartosz Golaszewski
• Re: [PATCH 1/3 v2] ahci: qoriq: added a condition to enable dma coherence
  • From: Tejun Heo
• Re: [PATCH v5 00/14] ARM: da850-lcdk: add SATA support
  • From: Tejun Heo
• [PATCH v2] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
  • From: Rameshwar Prasad Sahu
• [PATCH v5 02/14] ARM: davinci_all_defconfig: enable SATA modules
  • From: Bartosz Golaszewski
• [PATCH v5 01/14] devicetree: bindings: add bindings for ahci-da850
  • From: Bartosz Golaszewski
• [PATCH v5 03/14] ARM: davinci: add a clock lookup entry for the SATA clock
  • From: Bartosz Golaszewski
• [PATCH v5 05/14] ARM: davinci: da850: add con_id for the SATA clock
  • From: Bartosz Golaszewski
• [PATCH v5 04/14] sata: ahci-da850: get the sata clock using a connection id
  • From: Bartosz Golaszewski
• [PATCH v5 08/14] sata: ahci-da850: implement a workaround for the softreset quirk
  • From: Bartosz Golaszewski
• [PATCH v5 07/14] sata: ahci-da850: add device tree match table
  • From: Bartosz Golaszewski
• [PATCH v5 10/14] sata: ahci-da850: add a workaround for controller instability
  • From: Bartosz Golaszewski
• [PATCH v5 09/14] sata: ahci: export ahci_do_hardreset() locally
  • From: Bartosz Golaszewski
• [PATCH v5 11/14] sata: ahci-da850: un-hardcode the MPY bits
  • From: Bartosz Golaszewski
• [PATCH v5 14/14] ARM: dts: da850-lcdk: enable the SATA node
  • From: Bartosz Golaszewski
• [PATCH v5 12/14] ARM: davinci: remove BUG_ON() from da850_register_sata()
  • From: Bartosz Golaszewski
• [PATCH v5 13/14] ARM: dts: da850: add the SATA node
  • From: Bartosz Golaszewski
• [PATCH v5 06/14] ARM: davinci: da850: model the SATA refclk
  • From: Bartosz Golaszewski
• [PATCH v5 00/14] ARM: da850-lcdk: add SATA support
  • From: Bartosz Golaszewski
• Re: [PATCH v4 06/14] ARM: davinci: da850: model the SATA refclk
  • From: Bartosz Golaszewski
• Re: [PATCH v4 06/14] ARM: davinci: da850: model the SATA refclk
  • From: Sekhar Nori
• Re: [PATCH v4 01/14] devicetree: bindings: add bindings for ahci-da850
  • From: Sekhar Nori
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Michael Schmitz
• [PATCH 2/3 v2] ahci: qoriq: report error when ecc register address is missing in dts
  • From: yuantian.tang
• [PATCH 3/3 v2] ahci: qoriq: added ls2088a platforms support
  • From: yuantian.tang
• [PATCH 1/3 v2] ahci: qoriq: added a condition to enable dma coherence
  • From: yuantian.tang
• RE: [PATCH] ahci: qoriq: added ls2088a platforms support
  • From: Y.T. Tang
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Tejun Heo
• Re: command emulation fix
  • From: Tejun Heo
• Re: command emulation fix
  • From: Christoph Hellwig
• Re: command emulation fix
  • From: Christoph Hellwig
• Re: command emulation fix
  • From: Christoph Hellwig
• Re: command emulation fix
  • From: Tejun Heo
• Re: command emulation fix
  • From: Tejun Heo
• Re: linux-next 20170117 - lockdep whines and BUGs in ata_scsi_rbuf_fill()
  • From: Tejun Heo
• Re: command emulation fix
  • From: Tejun Heo
• Re: [PATCH v4 12/14] ARM: dts: da850: add the SATA node
  • From: Sergei Shtylyov
• Re: command emulation fix
  • From: Christoph Hellwig
• [PATCH v4 09/14] sata: ahci: export ahci_do_hardreset() locally
  • From: Bartosz Golaszewski
• [PATCH v4 06/14] ARM: davinci: da850: model the SATA refclk
  • From: Bartosz Golaszewski
• [PATCH v4 07/14] sata: ahci-da850: add device tree match table
  • From: Bartosz Golaszewski
• [PATCH v4 00/14] ARM: da850-lcdk: add SATA support
  • From: Bartosz Golaszewski
• [PATCH v4 10/14] sata: ahci-da850: add a workaround for controller instability
  • From: Bartosz Golaszewski
• [PATCH v4 08/14] sata: ahci-da850: implement a workaround for the softreset quirk
  • From: Bartosz Golaszewski
• [PATCH v4 02/14] ARM: davinci_all_defconfig: enable SATA modules
  • From: Bartosz Golaszewski
• [PATCH v4 01/14] devicetree: bindings: add bindings for ahci-da850
  • From: Bartosz Golaszewski
• [PATCH v4 05/14] ARM: davinci: da850: add con_id for the SATA clock
  • From: Bartosz Golaszewski
• [PATCH v4 03/14] ARM: davinci: add a clock lookup entry for the SATA clock
  • From: Bartosz Golaszewski
• [PATCH v4 04/14] sata: ahci-da850: get the sata clock using a connection id
  • From: Bartosz Golaszewski
• [PATCH v4 12/14] ARM: dts: da850: add the SATA node
  • From: Bartosz Golaszewski
• [PATCH v4 11/14] sata: ahci-da850: un-hardcode the MPY bits
  • From: Bartosz Golaszewski
• [PATCH v4 14/14] ARM: davinci: remove BUG_ON() from da850_register_sata()
  • From: Bartosz Golaszewski
• Re: [PATCH v3 06/13] ARM: davinci: da850: model the SATA refclk
  • From: Bartosz Golaszewski
• [PATCH v4 13/14] ARM: dts: da850-lcdk: enable the SATA node
  • From: Bartosz Golaszewski
• Re: [PATCH v3 09/13] sata: ahci: export ahci_do_hardreset() locally
  • From: Tejun Heo
• Re: [PATCH v3 06/13] ARM: davinci: da850: model the SATA refclk
  • From: Bartosz Golaszewski
• Re: [PATCH v3 09/13] sata: ahci: export ahci_do_hardreset() locally
  • From: Bartosz Golaszewski
• linux-next 20170117 - lockdep whines and BUGs in ata_scsi_rbuf_fill()
  • From: valdis . kletnieks
• [tj-libata:for-4.11 24/24] drivers/ata/ahci_qoriq.c:194:3: note: in expansion of macro 'if'
  • From: kbuild test robot
• Re: [PATCH] ahci: qoriq: added ls2088a platforms support
  • From: Tejun Heo
• [tj-libata:for-4.11 24/24] drivers/ata/ahci_qoriq.c:194:12: error: 'struct ahci_qoriq_priv' has no member named 'is_dmacoherent'
  • From: kbuild test robot
• Re: command emulation fix
  • From: Tejun Heo
• Re: [PATCH] ahci: qoriq: added ls2088a platforms support
  • From: Tejun Heo
• Re: [PATCH v2] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
  • From: Tejun Heo
• Re: [PATCH v3 09/13] sata: ahci: export ahci_do_hardreset() locally
  • From: Tejun Heo
• Re: [PATCH v3 06/13] ARM: davinci: da850: model the SATA refclk
  • From: David Lechner
• [PATCH v3 02/13] ARM: davinci_all_defconfig: enable SATA modules
  • From: Bartosz Golaszewski
• [PATCH v3 01/13] devicetree: bindings: add bindings for ahci-da850
  • From: Bartosz Golaszewski
• [PATCH v3 04/13] sata: ahci-da850: get the sata clock using a connection id
  • From: Bartosz Golaszewski
• [PATCH v3 06/13] ARM: davinci: da850: model the SATA refclk
  • From: Bartosz Golaszewski
• [PATCH v3 00/13] ARM: da850-lcdk: add SATA support
  • From: Bartosz Golaszewski
• [PATCH v3 05/13] ARM: davinci: da850: add con_id for the SATA clock
  • From: Bartosz Golaszewski
• [PATCH v3 08/13] sata: ahci-da850: implement a workaround for the softreset quirk
  • From: Bartosz Golaszewski
• [PATCH v3 09/13] sata: ahci: export ahci_do_hardreset() locally
  • From: Bartosz Golaszewski
• [PATCH v3 13/13] ARM: dts: da850-lcdk: enable the SATA node
  • From: Bartosz Golaszewski
• [PATCH v3 11/13] sata: ahci-da850: un-hardcode the MPY bits
  • From: Bartosz Golaszewski
• [PATCH v3 10/13] sata: ahci-da850: add a workaround for controller instability
  • From: Bartosz Golaszewski
• [PATCH v3 12/13] ARM: dts: da850: add the SATA node
  • From: Bartosz Golaszewski
• [PATCH v3 07/13] sata: ahci-da850: add device tree match table
  • From: Bartosz Golaszewski
• [PATCH v3 03/13] ARM: davinci: add a clock lookup entry for the SATA clock
  • From: Bartosz Golaszewski
• Re: [PATCH v2 12/14] ARM: dts: da850: add pinmux settings for the SATA controller
  • From: Sekhar Nori
• Re: [PATCH v2 06/14] ARM: davinci: da850: model the SATA refclk
  • From: Sekhar Nori
• Re: [PATCH v2 01/14] devicetree: bindings: add bindings for ahci-da850
  • From: Sekhar Nori
• Re: [PATCH v2 14/14] ARM: dts: da850-lcdk: enable the SATA node
  • From: Kevin Hilman
• Re: [PATCH v2 06/14] ARM: davinci: da850: model the SATA refclk
  • From: David Lechner
• Re: [PATCH v2 14/14] ARM: dts: da850-lcdk: enable the SATA node
  • From: David Lechner
• Re: [PATCH v2 11/14] sata: ahci-da850: un-hardcode the MPY bits
  • From: David Lechner
• Re: [PATCH v2 01/14] devicetree: bindings: add bindings for ahci-da850
  • From: David Lechner
• davinci common clock framework (was Re: [PATCH 03/10] devicetree: bindings: add bindings for ahci-da850)
  • From: David Lechner
• Re: [PATCH v2 04/14] sata: ahci-da850: get the sata clock using a connector id
  • From: Sergei Shtylyov
• Re: [PATCH v2] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
  • From: Rameshwar Sahu
• Re: [PATCH 00/10] ARM: da850-lcdk: add SATA support
  • From: Bartosz Golaszewski
• [PATCH v2 04/14] sata: ahci-da850: get the sata clock using a connector id
  • From: Bartosz Golaszewski
• [PATCH v2 06/14] ARM: davinci: da850: model the SATA refclk
  • From: Bartosz Golaszewski
• [PATCH v2 05/14] ARM: davinci: da850: add con_id for the SATA clock
  • From: Bartosz Golaszewski
• [PATCH v2 08/14] sata: ahci-da850: implement a workaround for the softreset quirk
  • From: Bartosz Golaszewski
• [PATCH v2 07/14] sata: ahci-da850: add device tree match table
  • From: Bartosz Golaszewski
• [PATCH v2 09/14] sata: ahci: export ahci_do_hardreset() locally
  • From: Bartosz Golaszewski
• [PATCH v2 11/14] sata: ahci-da850: un-hardcode the MPY bits
  • From: Bartosz Golaszewski
• [PATCH v2 14/14] ARM: dts: da850-lcdk: enable the SATA node
  • From: Bartosz Golaszewski
• [PATCH v2 12/14] ARM: dts: da850: add pinmux settings for the SATA controller
  • From: Bartosz Golaszewski
• [PATCH v2 13/14] ARM: dts: da850: add the SATA node
  • From: Bartosz Golaszewski
• [PATCH v2 10/14] sata: ahci-da850: add a workaround for controller instability
  • From: Bartosz Golaszewski
• [PATCH v2 03/14] ARM: davinci: add a clock lookup entry for the SATA clock
  • From: Bartosz Golaszewski
• [PATCH v2 02/14] ARM: davinci_all_defconfig: enable SATA modules
  • From: Bartosz Golaszewski
• [PATCH v2 01/14] devicetree: bindings: add bindings for ahci-da850
  • From: Bartosz Golaszewski
• [PATCH v2 00/14] ARM: da850-lcdk: add SATA support
  • From: Bartosz Golaszewski
• Re: [PATCH 03/10] devicetree: bindings: add bindings for ahci-da850
  • From: Sekhar Nori
• [PATCH] ahci: qoriq: added ls2088a platforms support
  • From: yuantian.tang
• Re: [PATCH 03/10] devicetree: bindings: add bindings for ahci-da850
  • From: David Lechner
• Re: command emulation fix
  • From: Christoph Hellwig
• Re: [PATCH 03/10] devicetree: bindings: add bindings for ahci-da850
  • From: Bartosz Golaszewski
• Re: [PATCH 03/10] devicetree: bindings: add bindings for ahci-da850
  • From: Sekhar Nori
• Re: [PATCH 04/10] sata: hardreset: retry if phys link is down
  • From: Bartosz Golaszewski
• Re: [PATCH 06/10] sata: ahci_da850: implement a softreset quirk
  • From: Bartosz Golaszewski
• Re: [PATCH 03/10] devicetree: bindings: add bindings for ahci-da850
  • From: Bartosz Golaszewski
• Re: [PATCH 09/10] ARM: dts: da850: add the SATA node
  • From: Bartosz Golaszewski
• Re: [PATCH] ahci: imx: fix building without hwmon or thermal
  • From: Tejun Heo
• Re: [PATCH 06/10] sata: ahci_da850: implement a softreset quirk
  • From: Tejun Heo
• Re: [PATCH 04/10] sata: hardreset: retry if phys link is down
  • From: Tejun Heo
• Re: command emulation fix
  • From: Tejun Heo
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Finn Thain
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Michael Schmitz
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Finn Thain
• command emulation fix
  • From: Christoph Hellwig
• [PATCH] libata: switch allocations for command emulation to GFP_ATOMIC
  • From: Christoph Hellwig
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Michael Schmitz
• Re: [libata] a234f7395c: BUG:sleeping_function_called_from_invalid_context_at_mm/slab.h
  • From: Christoph Hellwig
• Re: [PATCH 07/10] sata: ahci_da850: add support for the da850,clk_multiplier DT property
  • From: David Lechner
• Re: [PATCH 09/10] ARM: dts: da850: add the SATA node
  • From: David Lechner
• Re: [PATCH 03/10] devicetree: bindings: add bindings for ahci-da850
  • From: David Lechner
• Re: [PATCH 00/10] ARM: da850-lcdk: add SATA support
  • From: Sekhar Nori
• [PATCH 07/10] sata: ahci_da850: add support for the da850,clk_multiplier DT property
  • From: Bartosz Golaszewski
• [PATCH 04/10] sata: hardreset: retry if phys link is down
  • From: Bartosz Golaszewski
• [PATCH 03/10] devicetree: bindings: add bindings for ahci-da850
  • From: Bartosz Golaszewski
• [PATCH 02/10] ARM: davinci_all_defconfig: enable SATA modules
  • From: Bartosz Golaszewski
• [PATCH 00/10] ARM: da850-lcdk: add SATA support
  • From: Bartosz Golaszewski
• [PATCH 06/10] sata: ahci_da850: implement a softreset quirk
  • From: Bartosz Golaszewski
• [PATCH 01/10] ARM: davinci: add a clock lookup entry for the SATA clock
  • From: Bartosz Golaszewski
• [PATCH 05/10] sata: ahci_da850: add device tree match table
  • From: Bartosz Golaszewski
• [PATCH 09/10] ARM: dts: da850: add the SATA node
  • From: Bartosz Golaszewski
• [PATCH 10/10] ARM: dts: da850-lcdk: enable the SATA node
  • From: Bartosz Golaszewski
• [PATCH 08/10] ARM: dts: da850: add pinmux settings for the SATA controller
  • From: Bartosz Golaszewski
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Finn Thain
• Re: [PATCH] PCI:MSI Return -ENOSPC when requested vectors is not enough
  • From: Christoph Hellwig
• Re: [Lsf-pc] [LFS/MM TOPIC][LFS/MM ATTEND]: - Storage Stack and Driver Testing methodology.
  • From: Sagi Grimberg
• Re: [PATCH] PCI:MSI Return -ENOSPC when requested vectors is not enough
  • From: Bjorn Helgaas
• Re: [PATCH] ahci: imx: fix building without hwmon or thermal
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ahci: imx: fix building without hwmon or thermal
  • From: Arnd Bergmann
• Re: [LFS/MM TOPIC][LFS/MM ATTEND]: - Storage Stack and Driver Testing methodology.
  • From: Hannes Reinecke
• Re: [LFS/MM TOPIC][LFS/MM ATTEND]: - Storage Stack and Driver Testing methodology.
  • From: Christoph Hellwig
• Re: [LFS/MM TOPIC][LFS/MM ATTEND]: - Storage Stack and Driver Testing methodology.
  • From: Johannes Thumshirn
• Re: [LFS/MM TOPIC][LFS/MM ATTEND]: - Storage Stack and Driver Testing methodology.
  • From: Hannes Reinecke
• Re: [LFS/MM TOPIC][LFS/MM ATTEND]: - Storage Stack and Driver Testing methodology.
  • From: Chaitanya Kulkarni
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Michael Schmitz
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Tejun Heo
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Tejun Heo
• Re: [PATCH v2] libata: switch to dynamic allocation insted of ata_scsi_rbuf
  • From: Tejun Heo
• [PATCH v2] libata: switch to dynamic allocation insted of ata_scsi_rbuf
  • From: Christoph Hellwig
• Re: [PATCH 1/1] libata: Fix ATA request sense
  • From: Tejun Heo
• Re: libata: remove the global response buffer
  • From: Tejun Heo
• Re: [PATCH 6/6] libata: switch to dynamic allocation insted of ata_scsi_rbuf
  • From: Christoph Hellwig
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/6] libata: switch to dynamic allocation insted of ata_scsi_rbuf
  • From: Christoph Hellwig
• [PATCH 5/6] libata: don't call ata_scsi_rbuf_fill for command without a response buffer
  • From: Christoph Hellwig
• [PATCH 4/6] libata: call ->scsi_done from ata_scsi_simulate
  • From: Christoph Hellwig
• [PATCH 3/6] libata: remove the done allback from ata_scsi_args
  • From: Christoph Hellwig
• [PATCH 2/6] libata: move struct ata_scsi_args to libata-scsi.c
  • From: Christoph Hellwig
• [PATCH 1/6] libata: avoid global response buffer in atapi_qc_complete
  • From: Christoph Hellwig
• libata: remove the global response buffer
  • From: Christoph Hellwig
• Re: [PATCH 1/1] libata: Fix ATA request sense
  • From: Damien Le Moal
• Re: [PATCH] libata-eh: Use switch() instead of sparse array for protocol strings
  • From: Tejun Heo
• Re: [PATCH] libata-eh: Use switch() instead of sparse array for protocol strings
  • From: Geert Uytterhoeven
• Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
  • From: David Miller
• Re: [PATCH] libata-eh: Use switch() instead of sparse array for protocol strings
  • From: Tejun Heo
• Re: [PATCH] libata-eh: Use switch() instead of sparse array for protocol strings
  • From: Geert Uytterhoeven
• Re: [PATCH] libata-eh: Use switch() instead of sparse array for protocol strings
  • From: Tejun Heo
• Re: [PATCH] libata-eh: Use switch() instead of sparse array for protocol strings
  • From: Tejun Heo
• Re: [PATCH] libata-eh: Use switch() instead of sparse array for protocol strings
  • From: Christoph Hellwig
• Re: [PATCH] libata-eh: Use switch() instead of sparse array for protocol strings
  • From: Christoph Hellwig
• Re: [PATCH] libata-eh: Use switch() instead of sparse array for protocol strings
  • From: Geert Uytterhoeven
• Re: [PATCH] libata-eh: Use switch() instead of sparse array for protocol strings
  • From: Christoph Hellwig
• Re: [PATCH 1/3] ata: allow subsystem to be used on m68k arch
  • From: Geert Uytterhoeven
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata-eh: Use switch() instead of sparse array for protocol strings
  • From: Tejun Heo
• Re: [PATCH 1/3] ata: allow subsystem to be used on m68k arch
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata-eh: Use switch() instead of sparse array for protocol strings
  • From: Geert Uytterhoeven
• Re: [PATCH] libata-eh: Use switch() instead of sparse array for protocol strings
  • From: Tejun Heo
• [PATCH] libata-eh: Use switch() instead of sparse array for protocol strings
  • From: Geert Uytterhoeven
• LSF/MM 2017: Call for Proposals closes January 15th
  • From: Jeff Layton
• Re: [PATCH v1 1/1] ata: sata_mv: Convert to devm_ioremap_resource()
  • From: Tejun Heo
• [PATCH v1 1/1] ata: sata_mv: Convert to devm_ioremap_resource()
  • From: Andy Shevchenko
• Re: [V1] ata: sata_mv:- Handle return value of devm_ioremap.
  • From: Andy Shevchenko
• Re: [V1] ata: sata_mv:- Handle return value of devm_ioremap.
  • From: Tejun Heo
• Re: [PATCH 1/3] ata: allow subsystem to be used on m68k arch
  • From: Christoph Hellwig
• RE: [LSF/MM TOPIC] status update on stream IDs
  • From: Changho Choi
• RE: [LSF/MM TOPIC] status update on stream IDs
  • From: Kwan (Hingkwan) Huen
• Re: [LSF/MM TOPIC] status update on stream IDs
  • From: Andreas Dilger
• Re: [V1] ata: sata_mv:- Handle return value of devm_ioremap.
  • From: Andy Shevchenko
• Re: [V1] ata: sata_mv:- Handle return value of devm_ioremap.
  • From: Tejun Heo
• Re: [PATCH 1/1] libata: Fix ATA request sense
  • From: Tejun Heo
• Re: [PATCH] ata: sata_mv: fix module license specification
  • From: Tejun Heo
• Re: [PATCH v3 1/1] ahci: imx: Add imx53 SATA temperature sensor support
  • From: Tejun Heo
• [PATCH for-4.10-fixes] libata: apply MAX_SEC_1024 to all CX1-JB*-HP devices
  • From: Tejun Heo
• Re: [PATCH] ata: ahci_xgene: free structure returned by acpi_get_object_info()
  • From: Tejun Heo
• Re: [PATCH 0/6] ata: Missing HAS_DMA dependencies
  • From: Tejun Heo
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Michael Schmitz
• [PATCH] ata: ahci_xgene: free structure returned by acpi_get_object_info()
  • From: Michał Kępień
• [PATCH 2/6] ata: SATA_HIGHBANK should depend on HAS_DMA
  • From: Geert Uytterhoeven
• [PATCH 0/6] ata: Missing HAS_DMA dependencies
  • From: Geert Uytterhoeven
• [PATCH 3/6] ata: ATA_BMDMA should depend on HAS_DMA
  • From: Geert Uytterhoeven
• [PATCH 5/6] libata: Make ata_sg_clean() static again
  • From: Geert Uytterhoeven
• [PATCH 1/6] ata: SATA_MV should depend on HAS_DMA
  • From: Geert Uytterhoeven
• [PATCH 6/6] libata: Protect DMA core code by #ifdef CONFIG_HAS_DMA
  • From: Geert Uytterhoeven
• [PATCH 4/6] ata: AHCI and other non-SFF native drivers should depend on HAS_DMA
  • From: Geert Uytterhoeven
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: One Thousand Gnomes
• Re: [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] ata: allow subsystem to be used on m68k arch
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/3] ata: allow subsystem to be used on m68k arch
  • From: Christoph Hellwig
• [PATCH 3/3] ata: add Atari Falcon PATA controller driver
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 0/3] ata: add m68k/Atari Falcon PATA support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/3] ata: pass queued command to ->sff_data_xfer method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/3] ata: allow subsystem to be used on m68k arch
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: palm_bk3710: add __initdata to palm_bk3710_port_info
  • From: Bhumika Goyal
• Re: [PATCH 2/2] arm64: dts: updated sata node on ls1046a dts
  • From: Shawn Guo
• Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
  • From: Luiz Carlos Ramos
• Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
  • From: Luiz Carlos Ramos
• Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
  • From: David Miller
• Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
  • From: Bartlomiej Zolnierkiewicz
• LSF/MM 2017: Call for Proposals
  • From: Jeff Layton
• Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
  • From: David Miller
• Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
  • From: Bartlomiej Zolnierkiewicz
• RE:FW : Gravity die casting with A356-T6
  • From: Bob
• Re: [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
  • From: David Miller
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Tejun Heo
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: tedheadster
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Tejun Heo
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: tedheadster
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Tejun Heo
• RE: [v2,3/3] dt-bindings: ata: ahci_tegra: Add tegra210 AHCI
  • From: Preetham Chandru
• [ata] bea5b158ff WARNING: CPU: 0 PID: 1 at drivers/ata/libata-core.c:6482 ata_port_detach
  • From: Fengguang Wu
• RE: [v2,3/3] dt-bindings: ata: ahci_tegra: Add tegra210 AHCI
  • From: Preetham Chandru
• RE: [v2,2/3] ata: ahci_tegra: Add support to disable features
  • From: Preetham Chandru
• Re: [v2,2/3] ata: ahci_tegra: Add support to disable features
  • From: Mikko Perttunen
• RE: [v2,2/3] ata: ahci_tegra: Add support to disable features
  • From: Preetham Chandru
• Re: [v2,1/3] ata: ahci_tegra: add support for tegra210
  • From: Mikko Perttunen
• RE: [v2,1/3] ata: ahci_tegra: add support for tegra210
  • From: Preetham Chandru
• Re: [PATCH] set a base index for libsas based ata devices
  • From: Christoph Hellwig
• [PATCH] ata: sata_mv: fix module license specification
  • From: Uwe Kleine-König
• Re: [PATCH] set a base index for libsas based ata devices
  • From: James Bottomley
• [PATCH] set a base index for libsas based ata devices
  • From: Peter Chang
• Re: [PATCH 1/1] libata: Fix ATA request sense
  • From: Sergei Shtylyov
• Re: [PATCH 1/1] libata: Fix ATA request sense
  • From: Damien Le Moal
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: tedheadster
• Re: [PATCH 1/1] libata: Fix ATA request sense
  • From: Sergei Shtylyov
• Re: [PATCH 1/1] libata: Fix ATA request sense
  • From: Hannes Reinecke
• [PATCH 1/1] libata: Fix ATA request sense
  • From: Damien Le Moal
• Errors on Marvell
  • From: Emilio Lazo Zaia
• [GIT PULL UPDATED] libata changes for v4.10-rc1
  • From: Tejun Heo
• Re: [GIT PULL] libata changes for v4.10-rc1
  • From: Tejun Heo
• Re: [GIT PULL] libata changes for v4.10-rc1
  • From: Christoph Hellwig
• [GIT PULL] libata changes for v4.10-rc1
  • From: Tejun Heo
• [V1] ata: sata_mv:- Handle return value of devm_ioremap.
  • From: Arvind Yadav
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Tejun Heo
• Re: [RESEND PATCH] arm: assabet_defconfig: disable IDE subsystem
  • From: Sekhar Nori
• Re: [RESEND PATCH] arm: assabet_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Bartlomiej Zolnierkiewicz
• [GIT PULL] libata fixes for v4.9-rc8
  • From: Tejun Heo
• Re: [RFC PATCH 00/19] ide: remove deprecated host drivers (part 1)
  • From: David Miller
• Re: [RFC PATCH 00/19] ide: remove deprecated host drivers (part 1)
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFC PATCH 00/19] ide: remove deprecated host drivers (part 1)
  • From: Christoph Hellwig
• Re: [RFC PATCH 00/19] ide: remove deprecated host drivers (part 1)
  • From: David Miller
• Re: [RFC PATCH 00/19] ide: remove deprecated host drivers (part 1)
  • From: Bartlomiej Zolnierkiewicz
• Re: LSF/MM 2017: Call for Proposals
  • From: Michal Hocko
• Re: LSF/MM 2017: Call for Proposals
  • From: James Bottomley
• Re: [RFC PATCH 00/19] ide: remove deprecated host drivers (part 1)
  • From: David Miller
• Re: [RFC PATCH 00/19] ide: remove deprecated host drivers (part 1)
  • From: Bartlomiej Zolnierkiewicz
• Re: LSF/MM 2017: Call for Proposals
  • From: Michal Hocko
• Re: [Lsf-pc] LSF/MM 2017: Call for Proposals
  • From: Jan Kara
• Re: [PATCH] libata-scsi: disable SCT Write Same for the moment
  • From: Tejun Heo
• [PATCH] libata-scsi: disable SCT Write Same for the moment
  • From: Nicolai Stange
• Re: LSF/MM 2017: Call for Proposals
  • From: James Bottomley
• [PATCH v7 2/4] ata: Enabling ATA Command Priorities
  • From: Adam Manzanares
• Re: [PATCH v7 0/4] Enabling ATA Command Priorities
  • From: Tejun Heo
• [PATCH v7 1/4] block: Add iocontext priority to request
  • From: Adam Manzanares
• [PATCH v7 0/4] Enabling ATA Command Priorities
  • From: Adam Manzanares
• [PATCH v7 3/4] ata: ATA Command Priority Disabled By Default
  • From: Adam Manzanares
• [PATCH v7 4/4] ata: set ncq_prio_enabled iff device has support
  • From: Adam Manzanares
• Re: detect and warn about ahci-remapped NVMe devices
  • From: Tejun Heo
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Tejun Heo
• Re: [PATCH 2/3] ahci-remap.h: add ahci remapping definitions
  • From: Christoph Hellwig
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: tedheadster
• Re: [PATCH 2/3] ahci-remap.h: add ahci remapping definitions
  • From: Sergei Shtylyov
• [PATCH 3/3] ahci: warn about remapped NVMe devices
  • From: Christoph Hellwig
• [PATCH 2/3] ahci-remap.h: add ahci remapping definitions
  • From: Christoph Hellwig
• [PATCH 1/3] nvme: move NVMe class code to pci_ids.h
  • From: Christoph Hellwig
• detect and warn about ahci-remapped NVMe devices
  • From: Christoph Hellwig
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Tejun Heo
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: One Thousand Gnomes
• Re: Forcing a CAP register value to make booting more reliable on the Acer Aspire Switch Alpha 12 tablet
  • From: Tejun Heo
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: tedheadster
• Re: [PATCH] PCI:MSI Return -ENOSPC when requested vectors is not enough
  • From: Dennis Chen
• [PATCH] PCI:MSI Return -ENOSPC when requested vectors is not enough
  • From: Dennis Chen
• Forcing CAP register value to make booting more reliable on the Acer Aspire Switch Alpha 12 tablet
  • From: Sui Chen
• Re: [PATCH] PCI:MSI Return -ENOSPC when requested vectors is not enough
  • From: Christoph Hellwig
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Tejun Heo
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: One Thousand Gnomes
• [PATCH,v3] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Matthew Whitehead
• Re: [PATCH,v2] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Sergei Shtylyov
• [PATCH,v2] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Matthew Whitehead
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: tedheadster
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: tedheadster
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: One Thousand Gnomes
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Sergei Shtylyov
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Sergei Shtylyov
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: disable port while unloading ATA controller driver
  • From: Tejun Heo
• Re: [PATCH] ata: disable port while unloading ATA controller driver
  • From: Vladimir Zapolskiy
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Tejun Heo
• Re: [PATCH] ata: disable port while unloading ATA controller driver
  • From: Tejun Heo
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: tedheadster
• Re: [PATCH] ata: disable port while unloading ATA controller driver
  • From: Vladimir Zapolskiy
• Re: [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Tejun Heo
• Re: [PATCH] ata: disable port while unloading ATA controller driver
  • From: Tejun Heo
• Re: [PATCH] ata: disable port while unloading ATA controller driver
  • From: Vladimir Zapolskiy
• [PATCH] pata_legacy: Allow disabling of legacy PATA device probes on non-PCI systems
  • From: Matthew Whitehead
• Re: [PATCH] ata: sata_mv: check for errors when parsing nr-ports from dt
  • From: Tejun Heo
• [PATCH] ata: sata_mv: check for errors when parsing nr-ports from dt
  • From: Uwe Kleine-König
• Re: [PATCH] ata: disable port while unloading ATA controller driver
  • From: Vladimir Zapolskiy
• [GIT PULL] libata fixes for v4.9-rc7
  • From: Tejun Heo
• Re: [PATCH] ata: disable port while unloading ATA controller driver
  • From: Tejun Heo
• Re: [v2,3/3] dt-bindings: ata: ahci_tegra: Add tegra210 AHCI
  • From: Jon Hunter
• Re: [v2,3/3] dt-bindings: ata: ahci_tegra: Add tegra210 AHCI
  • From: Mikko Perttunen
• Re: [v2,2/3] ata: ahci_tegra: Add support to disable features
  • From: Mikko Perttunen
• Re: [v2,1/3] ata: ahci_tegra: add support for tegra210
  • From: Mikko Perttunen
• Re: [PATCH] ata: disable port while unloading ATA controller driver
  • From: Vladimir Zapolskiy
• [PATCH] ata: disable port while unloading ATA controller driver
  • From: Vladimir Zapolskiy
• Re: [RESEND PATCH] arm: assabet_defconfig: disable IDE subsystem
  • From: Arnd Bergmann
• [PATCH v2 1/3] ata: ahci_tegra: add support for tegra210
  • From: Preetham Chandru Ramchandra
• [PATCH v2 2/3] ata: ahci_tegra: Add support to disable features
  • From: Preetham Chandru Ramchandra
• [PATCH v2 0/3] ADD AHCI support for tegra210
  • From: Preetham Chandru Ramchandra
• [PATCH v2 3/3] dt-bindings: ata: ahci_tegra: Add tegra210 AHCI
  • From: Preetham Chandru Ramchandra
• Re: [PATCH] ahci: always fall back to single-MSI mode
  • From: Tejun Heo
• [Bug 188141] New: PCI0680 can't work reliably in UDMA mode over 33
  • From: bugzilla-daemon
• [Bug 185531] pata_hpt366 irq xx: nobody cared
  • From: bugzilla-daemon
• Re: [PATCH 0/5] ahci: nvme remap support
  • From: Dan Williams
• Re: [PATCH 1/2] dt-bindings: ahci-fsl-qoriq: added explanation for reg-names
  • From: Rob Herring
• [PATCH] ahci: always fall back to single-MSI mode
  • From: Christoph Hellwig
• [PATCH v2] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
  • From: Rameshwar Prasad Sahu
• Re: [RFT] powerpc: convert chrp32_defconfig to use libata PATA drivers
  • From: Michael Ellerman
• Re: [RFT] powerpc: convert maple_defconfig to use libata PATA drivers
  • From: Michael Ellerman
• Re: [RFT] powerpc: convert g5_defconfig to use libata PATA drivers
  • From: Michael Ellerman
• Re: [RFT] powerpc: convert pmac32_defconfig to use libata PATA drivers
  • From: Michael Ellerman
• Re: [RFT] powerpc: convert cell_defconfig to use libata PATA drivers
  • From: Michael Ellerman
• Re: powerpc: disable IDE subsystem in pasemi_defconfig
  • From: Michael Ellerman
• Re: [RFT] powerpc: convert ppc64e_defconfig to use libata PATA drivers
  • From: Michael Ellerman
• Re: [RFT] powerpc: convert ppc6xx_defconfig to use libata PATA drivers
  • From: Michael Ellerman
• Re: [RFT] powerpc: convert pseries_defconfig to use libata PATA drivers
  • From: Michael Ellerman
• Re: [RFT] powerpc: convert storcenter_defconfig to use libata PATA drivers
  • From: Michael Ellerman
• Re: [RFT] powerpc: convert ppc64_defconfig to use libata PATA drivers
  • From: Michael Ellerman
• Re: [RFT] powerpc: convert amigaone_defconfig to use libata PATA drivers
  • From: Michael Ellerman
• [PATCH 2/2] arm64: dts: updated sata node on ls1046a dts
  • From: yuantian.tang
• [PATCH 1/2] dt-bindings: ahci-fsl-qoriq: added explanation for reg-names
  • From: yuantian.tang
• Re: [PATCH 1/2] ahci: qoriq: added a condition to enable dma coherence
  • From: Robin Murphy
• Re: [PATCH 2/2] ahci: qoriq: report warning when ecc register is missing
  • From: Mathieu Poirier
• [PATCH 2/2] ahci: qoriq: report warning when ecc register is missing
  • From: yuantian.tang
• [PATCH 1/2] ahci: qoriq: added a condition to enable dma coherence
  • From: yuantian.tang
• Re: [PATCH 0/5] ahci: nvme remap support
  • From: Christoph Hellwig
• Re: [PATCH] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
  • From: Tejun Heo
• Re: [PATCH 3/4] pata: imx: add support of setting timings for PIO modes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
  • From: Rameshwar Sahu
• Re: [PATCH 3/4] pata: imx: add support of setting timings for PIO modes
  • From: Tejun Heo
• Re: [PATCH 3/4] pata: imx: add support of setting timings for PIO modes
  • From: Vladimir Zapolskiy
• Re: [PATCH 0/4] pata: imx: set timings for PIO modes up to PIO4
  • From: Tejun Heo
• Re: [PATCH] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
  • From: Tejun Heo
• Re: [PATCH] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
  • From: Rameshwar Sahu
• Re: [PATCH 3/4] pata: imx: add support of setting timings for PIO modes
  • From: Sergei Shtylyov
• [PATCH 2/4] pata: imx: set controller PIO mode with .set_piomode callback
  • From: Vladimir Zapolskiy
• [PATCH 1/4] pata: imx: sort headers out
  • From: Vladimir Zapolskiy
• [PATCH 3/4] pata: imx: add support of setting timings for PIO modes
  • From: Vladimir Zapolskiy
• [PATCH 4/4] pata: imx: support controller modes up to PIO4
  • From: Vladimir Zapolskiy
• [PATCH 0/4] pata: imx: set timings for PIO modes up to PIO4
  • From: Vladimir Zapolskiy
• Re: [RFC PATCH v3 1/2] Add support for eXclusive Page Frame Ownership (XPFO)
  • From: Christoph Hellwig
• Re: Write performance 50% compared to Windows
  • From: Bram Matthys
• Re: Write performance 50% compared to Windows
  • From: Bram Matthys
• Re: Write performance 50% compared to Windows
  • From: Bram Matthys
• Re: [PATCH] libata-scsi: Fixup ata_gen_passthru_sense()
  • From: Tejun Heo
• Re: Write performance 50% compared to Windows
  • From: Bram Matthys
• Re: Write performance 50% compared to Windows
  • From: Dâniel Fraga
• Write performance 50% compared to Windows
  • From: Bram Matthys
• Re: sata_sil24: swiotlb buffer is full ?
  • From: Andrew Ryder
• Re: Possible Bug In ATA/SCSI Fixed Sense
  • From: Hannes Reinecke
• [PATCH] libata-scsi: Fixup ata_gen_passthru_sense()
  • From: Hannes Reinecke
• Re: sata_sil24: swiotlb buffer is full ?
  • From: Konrad Rzeszutek Wilk
• Re: [RESEND PATCH] arm: assabet_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• Re: [RESEND PATCH] arm: assabet_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• Re: sata_sil24: swiotlb buffer is full ?
  • From: Tejun Heo
• Re: Possible Bug In ATA/SCSI Fixed Sense
  • From: Tejun Heo
• Re: [RESEND PATCH] arm: assabet_defconfig: disable IDE subsystem
  • From: Russell King - ARM Linux
• sata_sil24: swiotlb buffer is full ?
  • From: Andrew Ryder
• [Bug 185531] New: pata_hpt366 irq xx: nobody cared
  • From: bugzilla-daemon
• Possible Bug In ATA/SCSI Fixed Sense
  • From: Charles Machalow
• Re: [RFC PATCH] ata: piix: wait for end of asynchronous probing before
  • From: Tejun Heo
• Re: [RFC PATCH] ata: piix: wait for end of asynchronous probing before
  • From: Rob Herring
• Re: [RFC] libata-scsi: introducing SANITIZE translation
  • From: Mark Lord
• Re: [GIT PULL] libata fixes for v4.9-rc2
  • From: David Howells
• [GIT PULL] libata fixes for v4.9-rc2
  • From: Tejun Heo
• Re: [RESEND PATCH] arm: assabet_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v3 1/1] ahci: imx: Add imx53 SATA temperature sensor support
  • From: Fabien Lahoudere
• Re: [PATCH] ahci: fix the single MSI-X case in ahci_init_one
  • From: Tejun Heo
• [PATCH] ahci: fix the single MSI-X case in ahci_init_one
  • From: Christoph Hellwig
• Re: [PATCH] ahci: use pci_alloc_irq_vectors
  • From: Robert Richter
• Re: [PATCH] ahci: use pci_alloc_irq_vectors
  • From: David Daney
• Re: [PATCH 0/5] ahci: nvme remap support
  • From: Dan Williams
• Re: [PATCH] ahci: use pci_alloc_irq_vectors
  • From: Christoph Hellwig
• Re: [PATCH] ahci: use pci_alloc_irq_vectors
  • From: David Daney
• Re: [PATCH 0/5] ahci: nvme remap support
  • From: Christoph Hellwig
• Re: [PATCH 0/5] ahci: nvme remap support
  • From: Dan Williams
• Re: [PATCH 0/5] ahci: nvme remap support
  • From: Christoph Hellwig
• Re: [PATCH 0/5] ahci: nvme remap support
  • From: Dan Williams
• Re: [PATCH 0/5] ahci: nvme remap support
  • From: Christoph Hellwig
• Re: [PATCH 0/5] ahci: nvme remap support
  • From: Keith Busch
• Re: [PATCH 0/5] ahci: nvme remap support
  • From: Christoph Hellwig
• Re: [PATCH 0/5] ahci: nvme remap support
  • From: Dan Williams
• Re: [PATCH 0/5] ahci: nvme remap support
  • From: Christoph Hellwig
• Re: [PATCH 0/5] ahci: nvme remap support
  • From: Dan Williams
• Re: [PATCH] ahci: use pci_alloc_irq_vectors
  • From: Christoph Hellwig
• Re: [PATCH 0/5] ahci: nvme remap support
  • From: Christoph Hellwig
• [PATCH 5/5] nvme: ahci remap support
  • From: Dan Williams
• [PATCH 4/5] nvme: move common definitions to pci.h
  • From: Dan Williams
• [PATCH 3/5] nvme: introduce nvme_dev_ops
  • From: Dan Williams
• [PATCH 2/5] nvme: rename "pci" operations to "mmio"
  • From: Dan Williams
• [PATCH 1/5] ahci: nvme remap support
  • From: Dan Williams
• [PATCH 0/5] ahci: nvme remap support
  • From: Dan Williams
• Re: Regression with 0b9e2988ab22 ("ahci: use pci_alloc_irq_vectors")
  • From: Jarkko Nikula
• Re: [PATCH] ahci: use pci_alloc_irq_vectors
  • From: Robert Richter
• Re: Regression with 0b9e2988ab22 ("ahci: use pci_alloc_irq_vectors")
  • From: Christoph Hellwig
• Regression with 0b9e2988ab22 ("ahci: use pci_alloc_irq_vectors")
  • From: Jarkko Nikula
• Re: [PATCH] ahci: use pci_alloc_irq_vectors
  • From: Christoph Hellwig
• Re: [PATCH v2 1/1] ahci: imx: Add imx53 SATA temperature sensor support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v2 1/1] ahci: imx: Add imx53 SATA temperature sensor support
  • From: Fabien Lahoudere
• Re: [PATCH] ahci: use pci_alloc_irq_vectors
  • From: Robert Richter
• Re: [PATCH] ahci: fix nvec check
  • From: Tejun Heo
• Re: [PATCH] ahci: fix nvec check
  • From: Colin Ian King
• [PATCH] ahci: fix nvec check
  • From: Christoph Hellwig
• Re: [PATCH] ata: set ncq_prio_enabled if device has support
  • From: Tejun Heo
• [PATCH] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
  • From: Rameshwar Prasad Sahu
• [PATCH] ata: set ncq_prio_enabled if device has support
  • From: Adam Manzanares
• Re: [PATCH v6 3/3] ata: ATA Command Priority Disabled By Default
  • From: Adam Manzanares
• Re: [PATCH 2/2] ata: ahci_tegra: add support for tegra210
  • From: Tejun Heo
• Re: [PATCH v6 0/3] Enabling ATA Command Priorities
  • From: Tejun Heo
• Re: [PATCH v6 3/3] ata: ATA Command Priority Disabled By Default
  • From: Tejun Heo
• Re: [PATCH v6 2/3] ata: Enabling ATA Command Priorities
  • From: Tejun Heo
• [PATCH 2/2] ata: ahci_tegra: add support for tegra210
  • From: Preetham Chandru Ramchandra
• [PATCH 1/2] dt-bindings: ata: ahci_tegra: Add tegra210 AHCI support
  • From: Preetham Chandru Ramchandra
• [PATCH 0/2] ADD AHCI support for tegra210
  • From: Preetham Chandru Ramchandra
• Re: [PATCH v6 3/3] ata: ATA Command Priority Disabled By Default
  • From: Adam Manzanares
• Re: [PATCH v6 1/3] block: Add iocontext priority to request
  • From: Jens Axboe
• Re: [PATCH v6 3/3] ata: ATA Command Priority Disabled By Default
  • From: Tejun Heo
• Re: [PATCH v6 1/3] block: Add iocontext priority to request
  • From: Tejun Heo
• Re: [PATCH] ahci: qoriq: added ls1046a platform support
  • From: Tejun Heo
• Re: [PATCH v2 1/1] ahci: imx: Add imx53 SATA temperature sensor support
  • From: Tejun Heo
• Re: [RFC PATCH] ata: piix: wait for end of asynchronous probing before
  • From: Tejun Heo
• Re: [PATCH] ahci: only try to use multi-MSI mode if there is more than 1 port
  • From: Tejun Heo
• [PATCH] ahci: only try to use multi-MSI mode if there is more than 1 port
  • From: Christoph Hellwig
• Re: use pci_alloc_irq_vectors issues
  • From: Christoph Hellwig
• Re: use pci_alloc_irq_vectors issues
  • From: Emmanuel Benisty
• libahci ->irq_handler vs AHCI_HFLAG_MULTI_MSI
  • From: Christoph Hellwig
• Re: use pci_alloc_irq_vectors issues
  • From: Christoph Hellwig
• [PATCH v6 2/3] ata: Enabling ATA Command Priorities
  • From: Adam Manzanares
• [PATCH v6 0/3] Enabling ATA Command Priorities
  • From: Adam Manzanares
• [PATCH v6 3/3] ata: ATA Command Priority Disabled By Default
  • From: Adam Manzanares
• [PATCH v6 1/3] block: Add iocontext priority to request
  • From: Adam Manzanares
• [RFC PATCH] ata: piix: wait for end of asynchronous probing before
  • From: Corentin Labbe
• Re: Possible bug cause by Commit 5b01e4b9efa0b78672cbbea830c9fbcc7f239e29 >libata: Implement NCQ autosense
  • From: Hannes Reinecke
• Re: use pci_alloc_irq_vectors issues
  • From: Emmanuel Benisty
• Re: use pci_alloc_irq_vectors issues
  • From: Christoph Hellwig
• Re: use pci_alloc_irq_vectors issues
  • From: Emmanuel Benisty
• Re: use pci_alloc_irq_vectors issues
  • From: Christoph Hellwig
• [PATCH v2 1/1] ahci: imx: Add imx53 SATA temperature sensor support
  • From: Fabien Lahoudere
• Re: use pci_alloc_irq_vectors issues
  • From: Emmanuel Benisty
• Re: use pci_alloc_irq_vectors issues
  • From: Christoph Hellwig
• Re: use pci_alloc_irq_vectors issues
  • From: Emmanuel Benisty
• Re: use pci_alloc_irq_vectors issues
  • From: Christoph Hellwig
• Re: [PATCH v4 1/4] block: Add iocontext priority to request
  • From: Hannes Reinecke
• Re: [PATCH v4 1/4] block: Add iocontext priority to request
  • From: Adam Manzananares
• Re: [PATCH v5 2/4] fusion: remove iopriority handling
  • From: Adam Manzanares
• Re: [PATCH v4 2/4] fusion: remove iopriority handling
  • From: Hannes Reinecke
• Re: [PATCH v4 1/4] block: Add iocontext priority to request
  • From: Hannes Reinecke
• Re: [PATCH v5 2/4] fusion: remove iopriority handling
  • From: Christoph Hellwig
• [Bug 176931] ata failed to IDENTIFY, suspected regression
  • From: bugzilla-daemon
• [GIT PULL] libata changes for v4.9-rc1
  • From: Tejun Heo
• Re: [PATCH v4 2/4] fusion: remove iopriority handling
  • From: Adam Manzanares
• Re: [PATCH v5 4/4] ata: ATA Command Priority Disabled By Default
  • From: Adam Manzanares
• Re: [PATCH v5 2/4] fusion: remove iopriority handling
  • From: Shaun Tancheff
• Re: [PATCH v5 4/4] ata: ATA Command Priority Disabled By Default
  • From: Tejun Heo
• Re: [PATCH v5 3/4] ata: Enabling ATA Command Priorities
  • From: Tejun Heo
• [PATCH v5 3/4] ata: Enabling ATA Command Priorities
  • From: Adam Manzanares
• [PATCH v5 4/4] ata: ATA Command Priority Disabled By Default
  • From: Adam Manzanares
• [PATCH v5 2/4] fusion: remove iopriority handling
  • From: Adam Manzanares
• [PATCH v5 1/4] block: Add iocontext priority to request
  • From: Adam Manzanares
• [PATCH v5 0/4] Enabling ATA Command Priorities
  • From: Adam Manzanares
• Re: [PATCH v4 1/4] block: Add iocontext priority to request
  • From: Adam Manzananares
• Re: [PATCH v4 1/4] block: Add iocontext priority to request
  • From: Jens Axboe
• RE: [PATCH v4 2/4] fusion: remove iopriority handling
  • From: Sathya Prakash Veerichetty
• Re: [PATCH v4 1/4] block: Add iocontext priority to request
  • From: Dan Williams
• Re: [PATCH v4 1/4] block: Add iocontext priority to request
  • From: Jens Axboe
• Re: [PATCH v4 1/4] block: Add iocontext priority to request
  • From: Dan Williams
• Re: [PATCH v4 1/4] block: Add iocontext priority to request
  • From: Dan Williams
• Re: [PATCH v4 1/4] block: Add iocontext priority to request
  • From: Jens Axboe
• [PATCH v4 4/4] ata: ATA Command Priority Disabled By Default
  • From: Adam Manzanares
• [PATCH v4 3/4] ata: Enabling ATA Command Priorities
  • From: Adam Manzanares
• [PATCH v4 1/4] block: Add iocontext priority to request
  • From: Adam Manzanares
• [PATCH v4 2/4] fusion: remove iopriority handling
  • From: Adam Manzanares
• [PATCH v4 0/4] Enabling ATA Command Priorities
  • From: Adam Manzanares
• Re: [PATCH v3 1/2] block: Add iocontext priority to request
  • From: Jens Axboe
• Re: [PATCH v3 1/2] block: Add iocontext priority to request
  • From: Adam Manzanares
• Re: [PATCH v3 1/2] block: Add iocontext priority to request
  • From: Jens Axboe
• [PATCH] Fix interface autodetection in legacy IDE driver (trial #2)
  • From: Luiz Carlos Ramos
• [PATCH v3 0/2] Enabling ATA Command Priorities
  • From: Adam Manzanares
• [PATCH v3 2/2] ata: Enabling ATA Command Priorities
  • From: Adam Manzanares
• [PATCH v3 1/2] block: Add iocontext priority to request
  • From: Adam Manzanares
• Re: [PATCH v2 2/2] block: Add iocontext priority to request
  • From: Adam Manzanares
• [Bug 176931] ata failed to IDENTIFY, suspected regression
  • From: bugzilla-daemon
• [PATCH] ahci: qoriq: added ls1046a platform support
  • From: yuantian.tang
• [Bug 176931] ata failed to IDENTIFY, suspected regression
  • From: bugzilla-daemon
• [Bug 176931] New: ata failed to IDENTIFY, suspected regression
  • From: bugzilla-daemon
• Re: [PATCH v2 2/2] block: Add iocontext priority to request
  • From: Jeff Moyer
• Re: [PATCH v2 2/2] block: Add iocontext priority to request
  • From: Hannes Reinecke
• Re: [PATCH v2 1/2] ata: Enabling ATA Command Priorities
  • From: Hannes Reinecke
• [PATCH v2 2/2] block: Add iocontext priority to request
  • From: Adam Manzanares
• [PATCH v2 1/2] ata: Enabling ATA Command Priorities
  • From: Adam Manzanares
• [PATCH v2 0/2] Enabling ATA Command Priorities
  • From: Adam Manzanares
• Re: [PATCH 1/3] block: Add iocontext priority to request
  • From: Tejun Heo
• Re: [PATCH 1/3] block: Add iocontext priority to request
  • From: Adam Manzanares
• Re: [PATCH 1/3] block: Add iocontext priority to request
  • From: Tejun Heo
• RE: [PATCH] ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
  • From: Y.T. Tang
• Re: [PATCH 2/3] ata: Enabling ATA Command Priorities
  • From: Adam Manzanares
• Re: [PATCH 1/3] block: Add iocontext priority to request
  • From: Adam Manzanares
• [PATCH] ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
  • From: yuantian.tang
• Re: [PATCH v2] ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
  • From: Tejun Heo
• [PATCH v2] ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
  • From: yuantian.tang
• Re: ATA failure regression
  • From: tj@xxxxxxxxxx
• Re: ATA failure regression
  • From: Henrique de Moraes Holschuh
• Re: [PATCH] ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
  • From: Tejun Heo
• RE: [PATCH] ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
  • From: Y.T. Tang
• Re: [PATCH] ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
  • From: Tejun Heo
• Re: [PATCH 0/3] Enabling ATA Command Priorities
  • From: tj@xxxxxxxxxx
• Re: [PATCH 2/3] ata: Enabling ATA Command Priorities
  • From: Tejun Heo
• Re: [PATCH 1/3] block: Add iocontext priority to request
  • From: Tejun Heo
• Re: ATA failure regression
  • From: tj@xxxxxxxxxx
• RE: ATA failure regression
  • From: Shah, Nehal-bakulchandra
• Re: [PATCH 0/3] Enabling ATA Command Priorities
  • From: Adam Manzanares
• [PATCH] ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
  • From: yuantian.tang