On Wed, Nov 09, 2016 at 02:56:34AM +0200, Vladimir Zapolskiy wrote: > The changeset adds support of PIO modes up to PIO4 by setting > necessary timings in the driver, before the change it is assumed > that the timings are always set by a bootloader once and thus > only one possible PIO mode has been supported (PIO0). With > this change the driver can be used on boards without ATA controller > configuration done by a bootloader. > > The change is tested on a legacy i.MX31 board with an HDD connected > by a 40-pin flat cable. Applied to libata/for-4.10. Thanks. -- tejun -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
