On 01/17/2017 06:26 AM, Bartosz Golaszewski wrote:
Enable the SATA node for da850-lcdk. We omit the pinctrl property on
purpose - the muxed SATA pins are not hooked up to anything
SATA-related on the lcdk.
The REFCLKN/P rate on the board is 100MHz, so we need a multiplier of
15 for 1.5GHz PLL rate.
The multiplier is no longer in device tree, so this comment is not
necessary.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
---
arch/arm/boot/dts/da850-lcdk.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index afcb482..fbeee3c 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -105,6 +105,10 @@
status = "okay";
};
+&sata {
+ status = "okay";
+};
+
&mdio {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
