Hello.
On 11/29/2016 08:53 PM, Matthew Whitehead wrote:
If there is no PCI bus detected in drivers/ata/pata_legacy.c, it registers all the
common legacy PATA devices. This includes I/O ports (0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160)
and also their associated interrupts (14,15,11,10,8,12).
Unfortunately, on such systems those interrupt lines are at a premium because there is no
PCI alternative. This patch allows you to disable individual port/interrupt pairs by providing
a list of ports to skip allocating.
modprobe pata_legacy ignore_ports=0x1e8,0x168,0x1e0,0x160
Signed-off-by: Matthew Whitehead <tedheadster@xxxxxxxxx>
---
drivers/ata/pata_legacy.c | 32 +++++++++++++++++++++++++-------
1 files changed, 25 insertions(+), 7 deletions(-)
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 4fe9d21..753c7ce 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -130,6 +130,8 @@ static struct legacy_data legacy_data[NR_HOST];
static struct ata_host *legacy_host[NR_HOST];
static int nr_legacy_host;
+static int ignore_ports[NR_HOST];
+static int ignore_ports_count;
static int probe_all; /* Set to check all ISA port ranges */
static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */
@@ -1168,6 +1170,17 @@ static __init void probe_qdi_vlb(void)
}
}
+int find_port(int port)
*bool* instead please. And better rename it as port_ignored() I think.
+{
+ int i;
+ for (i = 0 ; i < ignore_ports_count; i++) {
+ if (port == ignore_ports[i])
+ return 1;
+ }
+ return 0;
+}
+
+
/**
* legacy_init - attach legacy interfaces
*
@@ -1212,17 +1225,22 @@ static __init int legacy_init(void)
if (winbond == 1)
winbond = 0x130; /* Default port, alt is 1B0 */
- if (primary == 0 || all)
+ if ((primary == 0 || all) && (!find_port(0x1F0)))
parens around !find_port() not needed.
legacy_probe_add(0x1F0, 14, UNKNOWN, 0);
- if (secondary == 0 || all)
+ if ((secondary == 0 || all) && (!find_port(0x170)))
Same here.
legacy_probe_add(0x170, 15, UNKNOWN, 0);
if (probe_all || !pci_present) {
/* ISA/VLB extra ports */
- legacy_probe_add(0x1E8, 11, UNKNOWN, 0);
- legacy_probe_add(0x168, 10, UNKNOWN, 0);
- legacy_probe_add(0x1E0, 8, UNKNOWN, 0);
- legacy_probe_add(0x160, 12, UNKNOWN, 0);
+
+ if (!find_port(0x1E0))
0x1E8 maybe?
+ legacy_probe_add(0x1E8, 11, UNKNOWN, 0);
+ if (!find_port(0x168))
+ legacy_probe_add(0x168, 10, UNKNOWN, 0);
+ if (!find_port(0x1E0))
+ legacy_probe_add(0x1E0, 8, UNKNOWN, 0);
+ if (!find_port(0x160))
+ legacy_probe_add(0x160, 12, UNKNOWN, 0);
}
if (opti82c46x)
[...]
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
