Hello Tejun,
The 09/29/2016 10:40, Tejun Heo wrote:
> Hello,
>
> On Tue, Sep 27, 2016 at 11:14:54AM -0700, Adam Manzanares wrote:
> > Patch adds association between iocontext and a request.
> >
> > Signed-off-by: Adam Manzanares <adam.manzanares@xxxxxxxx>
>
> Can you please describe how this may impact existing usages?
>
I'll start with the changes I made and work my way through a grep of
ioprio. Please add or correct any of the assumptions I have made.
In blk-core, the behavior before the patch is to get the ioprio for the request
from the bio. The only references I found to bio_set_prio are in bcache. Both
of these references are in low priority operations (gc, bg writeback) so the
iopriority of the bio is set to IO_PRIOCLASS_IDLE in these cases.
A kernel thread is used to submit these bios so the ioprio is going to come
from the current running task if the iocontext exists. This could be a problem
if we have set a task with high priority and some background work ends up
getting generated in the bcache layer. I propose that we check if the
iopriority of the bio is valid and if so, then we keep the priorirty from the
bio.
The second area that I see a potential problem is in the merging code code in
blk-core when a bio is queued. If there is a request that is mergeable then
the merge code takes the highest priority of the bio and the request. This
could wipe out the values set by bio_set_prio. I think it would be
best to set the request as non mergeable when we see that it is a high
priority IO request.
The third area that is of interest is in the CFQ scheduler and the ioprio is
only used in the case of async IO and I found that the priority is only
obtained from the task and not from the request. This leads me to believe that
the changes made in the blk-core to add the priority to the request will not
impact the CFQ scheduler.
The fourth area that might be concerning is the drivers. virtio_block copies
the request priority into a virtual block request. I am assuming that this
eventually makes it to another device driver so we don't need to worry about
this. null block device driver also uses the ioprio, but this is also not a
concern. lightnvm also sets the ioprio to build a request that is passed onto
another driver. The last driver that uses the request ioprio is the fusion
mptsas driver and I don't understand how it is using the ioprio. From what I
can tell it is taking a request of IOPRIO_CLASS_NONE with data of 0x7 and
calling this high priority IO. This could be impacted by the code I have
proposed, but I believe the authors intended to treat this particular ioprio
value as high priority. The driver will pass the request to the device
with high priority if the appropriate ioprio values is seen on the request.
The fifth area that I noticed may be impacted is file systems. btrfs uses low
priority IO for read ahead. Ext4 uses ioprio for journaling. Both of these
issues are not a problem because the ioprio is set on the task and not on a
bio.
> Thanks.
>
> --
> tejun
Take care,
Adam
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
