This series contains all the changes necessary to make SATA work on the da850-lcdk board. The first patch adds a clock lookup entry required for the ahci core to retrieve a functional clock. The second enables relevant config options for all davinci boards. The third adds device tree bindings for the ahci_da850 driver. The fourth adds a workaround for a SATA controller instability we detected after increasing the PLL0 frequency for proper LCD controller support. Patches 5 through 7 extend the ahci_da850 driver - add DT support, un-hardcode the clock multiplier value and add a workaround for a quirk present on the da850 SATA controller. Patches 8-10 add the device tree changes required to probe the driver. I'm posting the series as a whole to give all reviewers the full picture and visibility of the changes required, if needed I can resend the patches separately. Bartosz Golaszewski (10): ARM: davinci: add a clock lookup entry for the SATA clock ARM: davinci_all_defconfig: enable SATA modules devicetree: bindings: add bindings for ahci-da850 sata: hardreset: retry if phys link is down sata: ahci_da850: add device tree match table sata: ahci_da850: implement a softreset quirk sata: ahci_da850: add support for the da850,clk_multiplier DT property ARM: dts: da850: add pinmux settings for the SATA controller ARM: dts: da850: add the SATA node ARM: dts: da850-lcdk: enable the SATA node .../devicetree/bindings/ata/ahci-da850.txt | 21 ++++ arch/arm/boot/dts/da850-lcdk.dts | 5 + arch/arm/boot/dts/da850.dtsi | 30 ++++++ arch/arm/configs/davinci_all_defconfig | 2 + arch/arm/mach-davinci/da8xx-dt.c | 1 + drivers/ata/ahci_da850.c | 112 +++++++++++++++++++-- drivers/ata/libata-core.c | 16 ++- include/linux/libata.h | 4 +- 8 files changed, 177 insertions(+), 14 deletions(-) create mode 100644 Documentation/devicetree/bindings/ata/ahci-da850.txt -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
