On Friday 13 January 2017 06:07 PM, Bartosz Golaszewski wrote: > This series contains all the changes necessary to make SATA work on > the da850-lcdk board. > > The first patch adds a clock lookup entry required for the ahci core > to retrieve a functional clock. > > The second enables relevant config options for all davinci boards. > > The third adds device tree bindings for the ahci_da850 driver. > > The fourth adds a workaround for a SATA controller instability we > detected after increasing the PLL0 frequency for proper LCD > controller support. > > Patches 5 through 7 extend the ahci_da850 driver - add DT support, > un-hardcode the clock multiplier value and add a workaround for > a quirk present on the da850 SATA controller. > > Patches 8-10 add the device tree changes required to probe the driver. > > I'm posting the series as a whole to give all reviewers the full > picture and visibility of the changes required, if needed I can resend > the patches separately. I just tested this series on my LCDK board using a Western Digital SATA HDD and it works great with some basic read / write tests. Thanks! For the non-platform patches which I wont be queuing: Tested-by: Sekhar Nori <nsekhar@xxxxxx> I will take a look at the series closely next week. Thanks, Sekhar -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html