Hi, On Tuesday, January 03, 2017 11:49:16 AM Geert Uytterhoeven wrote: > Hi Bartlomiej, > > On Fri, Dec 30, 2016 at 3:01 PM, Bartlomiej Zolnierkiewicz > <b.zolnierkie@xxxxxxxxxxx> wrote: > > This patchset adds m68k/Atari Falcon PATA support to libata. > > Thanks for your series! > > That leaves us with 4 to go ;-) > > CONFIG_BLK_DEV_GAYLE > CONFIG_BLK_DEV_BUDDHA > CONFIG_BLK_DEV_MAC_IDE > CONFIG_BLK_DEV_Q40IDE They should be easy to port to libata, one just needs to remember to use ->qc_defer for ports that require serialization. > Note that using libata instead of the legacy IDE driver increases kernel size. > > After enabling libata: > > CONFIG_ATA=y > CONFIG_ATA_VERBOSE_ERROR=y > CONFIG_ATA_SFF=y > CONFIG_PATA_FALCON=y > > an atari_defconfig kernel grew by: > > add/remove: 775/0 grow/shrink: 753/41 up/down: 98999/-242 (98757) > > After disabling CONFIG_IDE: > > add/remove: 0/589 grow/shrink: 0/12 up/down: 0/-62835 (-62835) > > So the net result is: > > add/remove: 775/589 grow/shrink: 749/51 up/down: 98886/-62964 (35922) SATA-specific code is not needed on legacy PATA systems so it should be possible to reduce the size by adding new config option (i.e. SATA_HOST) and: - covering SATA only code with CONFIG_SATA_HOST ifdefs - making SATA_HOST to be selected by SATA host drivers in drivers/ata/KConfig > Disabling CONFIG_ATA_VERBOSE_ERROR saved 1380 bytes, which is less than the > value advertised by Kconfig (6KB). If it is only ~1kB nowadays I would vote for making the error logging always verbose and just removing CONFIG_ATA_VERBOSE_ERROR, Tejun? Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html