This adds device tree bindings for the Faraday Technology FTIDE010 found in the Storlink/Storm/Cortina Systems Gemini SoC. I am not 100% sure that this part is from Faraday Technology but a lot points in that direction: - A later IDE interface called FTIDE020 exist and share some properties. - The SATA bridge has the same Built In Self Test (BIST) that the Faraday FTSATA100 seems to have, and it has version number 0100 in the device ID register, so this is very likely a FTSATA100 bundled with the FTIDE010. Cc: devicetree@xxxxxxxxxxxxxxx Cc: John Feng-Hsin Chiang <john453@xxxxxxxxxxxxxxxx> Cc: Greentime Hu <green.hu@xxxxxxxxx> Acked-by: Hans Ulli Kroll <ulli.kroll@xxxxxxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- ChangeLog v1->v2: - Cut the timings defintions from the device tree. Hard-code it in the driver instead, keeping the nice layout and configurability by making it easy to tweak the timings in the code. - Fix up some confused references to 50 MHz in 66 MHz properties. Greentime: I think this may be interesting to you since the FTIDE020 will need the same bindings so we can probably just reuse them and maybe make the parser a library if you want to upstream the FTIDE020. Faraday people: I do not have it from a source that this hardware is really FTIDE010 but I would be VERY surprised if it is not. U-Boot has an FTIDE020 IDE controller synthesized in the Andestech platform, and it has a similar yet different register layout, featuring similar timing set-ups: http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/block/ftide020.h http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/block/ftide020.c --- .../devicetree/bindings/ata/faraday,ftide010.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/ata/faraday,ftide010.txt diff --git a/Documentation/devicetree/bindings/ata/faraday,ftide010.txt b/Documentation/devicetree/bindings/ata/faraday,ftide010.txt new file mode 100644 index 000000000000..a0c64a29104d --- /dev/null +++ b/Documentation/devicetree/bindings/ata/faraday,ftide010.txt @@ -0,0 +1,38 @@ +* Faraday Technology FTIDE010 PATA controller + +This controller is the first Faraday IDE interface block, used in the +StorLink SL2312 and SL3516, later known as the Cortina Systems Gemini +platform. The controller can do PIO modes 0 through 4, Multi-word DMA +(MWDM)modes 0 through 2 and Ultra DMA modes 0 through 6. + +On the Gemini platform, this PATA block is accompanied by a PATA to +SATA bridge in order to support SATA. This is why a phandle to that +controller is compulsory on that platform. + +The timing properties are unique per-SoC, not per-board. + +Required properties: +- compatible: should be one of + "cortina,gemini-pata", "faraday,ftide010" + "faraday,ftide010" +- interrupts: interrupt for the block +- reg: registers and size for the block + +Optional properties: +- clocks: a SoC clock running the peripheral. +- clock-names: should be set to "PCLK" for the peripheral clock. + +Required properties for "cortina,gemini-pata" compatible: +- sata: a phande to the Gemini PATA to SATA bridge, see + cortina,gemini-sata-bridge.txt for details. + +Example: + +ata@63000000 { + compatible = "cortina,gemini-pata", "faraday,ftide010"; + reg = <0x63000000 0x100>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + clocks = <&gcc GEMINI_CLK_GATE_IDE>; + clock-names = "PCLK"; + sata = <&sata>; +}; -- 2.9.4 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
