Re: ide boot failure 2.6.36/2.6.28 - 2.6.27 works

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Alan,

> On a PCI box however you should always have a matching PCI driver,

True - in this case PIIX4, and selecting it makes things work
(but was not required earlier).

> If you have a PCI ATA driver which is not handled by any of the libata
> drivers and is not known by ata_generic then please let me know.

Also libata needs the additional selection of PIIX4,
but then works fine. (Of course all devices are renamed.)

Andries


> if its hitting a lot of people

Maybe a few hundred visible via Google.
One in every hundred thousand users?

---
Post by Thomas Ingerslev 2009-09-02
I have been struggling with error this fore quite a while,
and have finally found a solution.
... I ended up with just adding ide_generic.probe_mask=0x03 ...
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux