Hi - I'm having problems getting a Sil 3124 card with a PCI-Express 1x interface to work, see https://bugzilla.redhat.com/show_bug.cgi?id=641878 Here is the card: http://www.era-adapter.com/pciexpress-1x-to-4-ports-sata-ii-adapter-p-60.html I hope this is an appropriate place to report this. I've tried both the Fedora 12 (2.6.32.21) and Fedora 14 beta install kernel (2.6.35), running x86-64. I just get timeouts when booting with two drives attached: Oct 11 12:47:29 xpc12 kernel: scsi7 : sata_sil24 Oct 11 12:47:29 xpc12 kernel: scsi6 : pata_jmicron Oct 11 12:47:29 xpc12 kernel: scsi8 : sata_sil24 Oct 11 12:47:29 xpc12 kernel: scsi9 : sata_sil24 Oct 11 12:47:29 xpc12 kernel: scsi11 : sata_sil24 Oct 11 12:47:29 xpc12 kernel: ata9: SATA max UDMA/100 host m128@0xe2388000 port 0xe2380000 irq 18 Oct 11 12:47:29 xpc12 kernel: ata10: SATA max UDMA/100 host m128@0xe2388000 port 0xe2382000 irq 18 Oct 11 12:47:29 xpc12 kernel: ata11: SATA max UDMA/100 host m128@0xe2388000 port 0xe2384000 irq 18 Oct 11 12:47:29 xpc12 kernel: ata12: SATA max UDMA/100 host m128@0xe2388000 port 0xe2386000 irq 18 Oct 11 12:47:29 xpc12 kernel: scsi10 : pata_jmicron Oct 11 12:47:29 xpc12 kernel: ata7: PATA max UDMA/100 cmd 0xd040 ctl 0xd030 bmdma 0xd000 irq 19 Oct 11 12:47:29 xpc12 kernel: ata8: PATA max UDMA/100 cmd 0xd020 ctl 0xd010 bmdma 0xd008 irq 19 Oct 11 12:47:29 xpc12 kernel: ata7.00: ATAPI: TSSTcorpCD/DVDW SH-S162A, TS01, max UDMA/33 Oct 11 12:47:29 xpc12 kernel: ata7.00: configured for UDMA/33 Oct 11 12:47:29 xpc12 kernel: ata9: SATA link down (SStatus 0 SControl 0) Oct 11 12:47:29 xpc12 kernel: ata10: SATA link down (SStatus 0 SControl 0) Oct 11 12:47:29 xpc12 kernel: ata11: softreset failed (SRST command error) Oct 11 12:47:29 xpc12 kernel: ata11: reset failed (errno=-5), retrying in 8 secs Oct 11 12:47:29 xpc12 kernel: ata11: softreset failed (SRST command error) Oct 11 12:47:29 xpc12 kernel: ata11: reset failed (errno=-5), retrying in 8 secs Oct 11 12:47:29 xpc12 kernel: ata11: softreset failed (SRST command error) Oct 11 12:47:29 xpc12 kernel: ata11: reset failed (errno=-5), retrying in 33 secs Oct 11 12:47:29 xpc12 kernel: ata11: limiting SATA link speed to 1.5 Gbps Oct 11 12:47:29 xpc12 kernel: ata11: softreset failed (SRST command error) Oct 11 12:47:29 xpc12 kernel: ata11: reset failed, giving up Oct 11 12:47:29 xpc12 kernel: ata12: softreset failed (SRST command error) Oct 11 12:47:29 xpc12 kernel: ata12: reset failed (errno=-5), retrying in 8 secs Oct 11 12:47:29 xpc12 kernel: ata12: softreset failed (SRST command error) Oct 11 12:47:29 xpc12 kernel: ata12: reset failed (errno=-5), retrying in 8 secs Oct 11 12:47:29 xpc12 kernel: ata12: softreset failed (SRST command error) Oct 11 12:47:29 xpc12 kernel: ata12: reset failed (errno=-5), retrying in 33 secs Oct 11 12:47:29 xpc12 kernel: ata12: limiting SATA link speed to 1.5 Gbps Oct 11 12:47:29 xpc12 kernel: ata12: softreset failed (SRST command error) Oct 11 12:47:29 xpc12 kernel: ata12: reset failed, giving up This is what lspci reports for the card and its PCIex to PCI-X bridge: 03:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa) (prog-if 00 [Normal decode]) Physical Slot: 0-1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=03, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: e2300000-e23fffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [60] Express (v1) PCI/PCI-X Bridge, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Power Budgeting <?> Kernel modules: shpchp 04:00.0 RAID bus controller: Silicon Image, Inc. SiI 3124 PCI-X Serial ATA Controller (rev 01) Subsystem: Silicon Image, Inc. Device 7124 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at e2388000 (64-bit, non-prefetchable) [size=128] Region 2: Memory at e2380000 (64-bit, non-prefetchable) [size=32K] Region 4: I/O ports at e000 [size=16] Expansion ROM at e2300000 [disabled] [size=512K] Capabilities: [64] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [40] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=12 Status: Dev=ff:1f.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=12 DMCRS=128 RSCEM- 266MHz- 533MHz- Capabilities: [54] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: sata_sil24 Kernel modules: sata_sil24 The motherboard is an Intel DP43TF with Intel Q9650 CPU. I haven't configured any RAID on the device. Any ideas? Thanks Jeremy -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
