Re: kernel problems with smart on LSI-92xx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Artem Bokhan <aptem@xxxxxx> writes:

>   It appears that passing self-test command to SATA disk does not work
> too. Although nobody reports any error, self-test actually just does
> not start.
>
> smartctl -d megaraid,10 -t long /dev/sg0
>
> smartctl 5.40 2010-10-16 r3189 [x86_64-unknown-linux-gnu] (local build)
> Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
>
> /dev/sg0 [megaraid_disk_10] [SAT]: Device open changed type from 'megaraid' to 'sat'
> === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
> Sending command: "Execute SMART Extended self-test routine immediately
> in off-line mode".
> Drive command "Execute SMART Extended self-test routine immediately in
> off-line mode" successful.
> Testing has begun.
> Please wait 255 minutes for test to complete.
> Test will complete after Sat Nov 27 01:54:44 2010
>
> Use smartctl -X to abort test.

I'm not sure I understand you correctly.  The above output looks
normal.  You mean that "smartctl -l selftest" doesn't show any test in
progress or finished? 


BjÃrn
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux