On Tue, Nov 30, 2010 at 12:53:17PM -0500, Kyle McMartin wrote: > On Tue, Nov 30, 2010 at 11:31:50AM -0500, Kyle McMartin wrote: > > On Tue, Nov 30, 2010 at 05:29:06PM +0100, Tejun Heo wrote: > > > > Be happy to apply any debug patches, but I plan on replacing the drive > > > > with a faster one at some point in the next few weeks. > > > > > > Can you please apply the following patch and report the resulting > > > kernel log? You're on ahci, right? > > > > > > > Yup, building now. > > > > Ok, running it, I haven't seen the issue across three suspends... Will > update when it inevitably happens. > [10272.544858] ata1.00: ahci: internal command failure, irq_stat=0x400001 [10272.544943] ata1.00: internal command failure: stat=0xef ehi_desc="irq_stat 0x00400001, PHY RDY changed" [10272.544951] ata1.00: failed to enable DIPM, Emask 0x100 [10272.544960] ata1: hard resetting link [10273.004718] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [10273.006108] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [10273.006116] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [10273.006410] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [10273.006417] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [10273.009337] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [10273.009344] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [10273.009611] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [10273.009631] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [10273.010945] ata1.00: configured for UDMA/100 [10273.011206] ata1.00: ahci: internal command failure, irq_stat=0x400001 [10273.011241] ata1.00: internal command failure: stat=0xef ehi_desc="irq_stat 0x00400001, PHY RDY changed" [10273.011247] ata1.00: failed to enable DIPM, Emask 0x100 [10273.011250] ata1: disabling LPM on the link [10273.011255] ata1: limiting SATA link speed to 1.5 Gbps [10273.011259] ata1.00: limiting speed to UDMA/100:PIO3 regards, Kyle -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
