Re: [BUG] libahci returns stale result tf much of the time.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

On 10/04/2010 09:51 PM, Mark Lord wrote:
>> Which opcodes are you using? I see set-acoustic-mgmt in one email...
> 
> opcode 0xec : IDENTIFY
> 
> The result_tf it receives is from whatever non-data command last preceeds it.
> So if the previous non-data command failed (eg. hdparm -Z),
> then the IDENTIFY command actually works, but appears to fail.

I've been thinking about it and it occurred to me that PIO data
commands don't use D2H Reg FIS for command completion.  I don't recall
exactly but the PIO Setup FIS contains the result register, right?  It
seems like we should look at different places or simulate output
depending on the command executed.  Hmmm....

Thanks.

-- 
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux